Astra Depot IP68 Waterproof RGB LED Swimming Pool Lights - User Manual

1. Introduction

Thank you for choosing the Astra Depot IP68 Waterproof RGB LED Swimming Pool Lights. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new lighting system. Please read these instructions carefully before use and retain them for future reference.

Figure 1: Astra Depot RGB LED Swimming Pool Lights with Remote Control.

2. Safety Information

• Ensure the power supply is disconnected before installation or maintenance.
• The lamp requires a 12V AC power converter. Do not connect directly to 110V or 220V power.
• It is highly recommended to use an underwater cable gland for secure wiring.
• Recommended installation depth in water is 50cm.
• This product is IP68 rated for waterproofing, suitable for continuous submersion.

3. Package Contents

Upon unpacking, please verify that all components are present:

• 2x Swimming Pool LED Light
• 2x Rubber Ring
• 2x Mounting Bracket
• 2x 12-Key Remote Control (23A 12V battery not included)

4. Setup and Installation

Follow these steps for proper installation of the LED pool lights:

1. Remove the mounting bracket from the lamp unit.
2. Fix the bracket securely to the wall of the pool using appropriate screws (not included).
3. Screw the lamp unit onto the fixed bracket.
4. Connect the lamp's wire to a 12V AC power converter (not included). Ensure connections are waterproof, preferably using an underwater cable gland.
5. The recommended installation depth is 50cm below the water surface.

Figure 2: Installation steps for the LED pool light.

Figure 3: The IP68 waterproof design ensures durability in submerged conditions.

5. Operating Instructions

The LED pool lights are controlled by the included 12-key RF remote control. Insert a 23A 12V battery (not included) into the remote before use.

5.1 Remote Control Functions

• ON/OFF: Power the lights on or off.
• Color Selection: Choose from 7 static colors (Red, Green, Blue, Yellow, Cyan, Purple, White).
• Mode Selection: Select from 3 dynamic color-changing modes.
• Brightness Adjustment: Adjust the intensity of the static colors.
• Speed Adjustment: Control the speed of dynamic modes.

Figure 4: Remote control functionality for color and mode selection.

Figure 5: Examples of the multiple color settings available.

6. Maintenance

• Regularly inspect the light units and cables for any signs of damage or wear.
• Clean the lens periodically to ensure maximum light output. Use a soft cloth and mild cleaning solution.
• Ensure the remote control battery is replaced when its performance diminishes.
• For prolonged periods of non-use, it is advisable to disconnect the power supply.

7. Troubleshooting

• Light not turning on: Check the 12V AC power converter connection and ensure the remote control battery is functional.
• Remote control not responding: Replace the 23A 12V battery in the remote. Ensure there are no obstructions between the remote and the light receiver.
• Dim or inconsistent lighting: Verify the power supply is stable. Clean the light lens for any buildup.
• Water ingress: Immediately disconnect power. This indicates a seal failure. Do not attempt to repair if water has entered the unit; contact support.

8. Specifications

Figure 6: Dimensions of the LED pool light.

Figure 7: Detailed features of the light construction.

9. Warranty and Support

Astra Depot products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact your retailer. For technical support or inquiries, please visit the official Astra Depot store on Amazon:

Visit the Astra Depot Store