1. Introduction
1.1 Product Overview
The Nonstop Station O is a modern alarm clock and charging station designed for convenience and functionality. Its compact design makes it suitable for various spaces, while integrated USB ports (including USB-C) and a dimmable display enhance user experience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting.
Figure 1: Nonstop Station O Alarm Clock and Charging Station. This image shows the black cylindrical alarm clock with a digital display showing "12:46", and two charging ports (USB-A and USB-C) on the front.
1.2 Key Features
- Dual USB Charging: Two front-facing USB outlets (USB-A and USB-C) for charging smartphones, tablets, and other devices.
- Dimmable Display: Adjustable display brightness, including the option to turn the display completely off for undisturbed sleep.
- Automatic Daylight Saving Time (DST): Automatically adjusts for Daylight Saving Time changes.
- Built-in Backup Battery: Retains time and alarm settings during power outages without requiring battery changes.
- Compact and Modern Design: Small footprint ideal for nightstands and various interior designs.
2. Setup
2.1 Unpacking
Carefully remove the alarm clock from its packaging. Ensure all components are present: the alarm clock unit and the power adapter.
2.2 Power Connection
- Locate the power input port on the back of the alarm clock.
- Connect the provided power adapter to the alarm clock.
- Plug the power adapter into a standard electrical outlet. The display will illuminate, and the clock will power on.
2.3 Initial Time Setting
Upon initial power-up, the clock may display a default time or the correct time if the backup battery is active. If the time is incorrect, follow the instructions in Section 3.1 to set the correct time.
Figure 2: Rear view of the alarm clock highlighting control buttons. This image shows the back of the black cylindrical alarm clock with buttons for alarm, snooze/light, hour, and minute. It also indicates "Easy Set" for hour/minute buttons, "Auto DST" for automatic time adjustment, and "Backup" for saving settings.
3. Operating Instructions
3.1 Setting the Time
- Locate the "HR" (Hour) and "MIN" (Minute) buttons on the back of the unit.
- Press the "HR" button repeatedly to adjust the hour. The time will cycle through AM/PM.
- Press the "MIN" button repeatedly to adjust the minute.
- The clock automatically saves the set time after a few seconds of inactivity.
3.2 Setting the Alarm
- Locate the "Alarm" button (bell icon) on the back of the unit.
- Press and hold the "Alarm" button until the alarm time starts flashing on the display.
- Use the "HR" and "MIN" buttons to set your desired alarm time.
- Press the "Alarm" button again to confirm the alarm setting. The alarm icon will appear on the display, indicating the alarm is active.
- To turn off the alarm, press the "Alarm" button once. The alarm icon will disappear.
3.3 Dimmable Display
The display brightness can be adjusted to suit your preference, including turning it completely off.
- Locate the "Light" button (sun icon) on the back of the unit.
- Press the "Light" button repeatedly to cycle through different brightness levels (e.g., High, Medium, Low, Off).
- Select the desired brightness level.
3.4 USB Charging
The Station O features two front-facing USB ports for convenient device charging.
Figure 3: Front view of the alarm clock displaying the USB-A and USB-C charging ports. The digital clock shows "12:46" and a "PM" indicator.
- Locate the USB-A and USB-C ports on the front of the unit, below the display.
- Connect your device's charging cable to the appropriate USB port on the alarm clock.
- Connect the other end of the cable to your device. Charging will begin automatically.
- Note: Charging speed may vary depending on the device and cable used.
4. Maintenance
4.1 Cleaning
- Before cleaning, unplug the alarm clock from the power outlet.
- Wipe the exterior surfaces with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- Avoid getting moisture into any openings.
4.2 Storage
If storing the unit for an extended period, unplug it from the power source and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
5. Troubleshooting
If you encounter issues with your Nonstop Station O, please refer to the following table for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is off or blank. | No power connection; display brightness set to "Off". | Ensure the power adapter is securely plugged into the clock and the outlet. Press the "Light" button to increase display brightness. |
| Alarm does not sound. | Alarm not set or turned off; volume too low (if applicable). | Verify the alarm is set and the alarm icon is visible on the display. Ensure the alarm volume is audible (if adjustable). |
| Devices not charging via USB. | Cable issue; device not compatible; clock not powered. | Ensure the clock is powered on. Try a different USB cable. Confirm your device is compatible with USB charging. |
| Time is incorrect after power outage. | Backup battery depleted or unit unplugged for extended period. | The internal backup battery should maintain time. If not, reset the time manually as per Section 3.1. |
6. Specifications
Figure 4: Product dimensions of the Nonstop Station O. This image shows the alarm clock from a top-down perspective with measurements: Depth 2.55" (65mm) and Width 3.7" (94mm).
| Feature | Detail |
|---|---|
| Product Dimensions | 6.48 x 9.4 x 9.78 cm (2.55 x 3.7 x 3.85 inches) |
| Item Weight | 425 g (0.94 lbs) |
| Model Numbers | NSO-BK, NSO-WFD, NSO-WFL |
| Display Type | Digital LED |
| Charging Ports | 1x USB-A, 1x USB-C |
| Special Features | Alarm, Dimmable Display, Auto Daylight Saving Time, Backup Battery |
| Color | Black (other colors available for different models) |
| Manufacturer | Nonstop |
7. Warranty and Support
Nonstop products are designed for reliability and performance. For specific warranty information regarding your Station O alarm clock, please refer to the warranty card included with your purchase or visit the official Nonstop website.
If you require technical assistance, have questions about product operation, or need to report an issue, please contact Nonstop customer support through their official channels. Contact information can typically be found on the product packaging or the manufacturer's website.
Please retain your proof of purchase for warranty claims.
