Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Livex Lighting Wynnewood 1 Light Wall Sconce, Model 42700-81. Please read all instructions carefully before beginning installation and retain this manual for future reference. This wall sconce features a painted satin nickel finish and white alabaster glass, designed for indoor, damp locations.
Image: Front view of the Livex Lighting Wynnewood 1 Light Wall Sconce with its white alabaster glass shade and satin nickel accents.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Read all instructions carefully before installation.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Use only UL/cUL listed wire connectors.
- Ensure the fixture is properly grounded.
- Do not exceed the maximum wattage specified for the bulb.
- This fixture is suitable for damp locations.
Package Contents
Verify that all components are present before beginning installation:
- Light fixture (1)
- Mounting hardware (typically includes mounting strap, outlet box screws, wire nuts, decorative nuts)
- White Alabaster Glass Shade (1)
Note: Bulbs are NOT INCLUDED and must be purchased separately.
Tools Required (Not Included)
- Phillips head screwdriver
- Flathead screwdriver
- Wire strippers
- Electrical tape
- Pliers
- Safety glasses
Setup and Installation
Before You Begin: Turn off power at the circuit breaker or fuse box to avoid electrical shock. Ensure the mounting surface is clean, dry, and structurally sound.
- Prepare the Mounting Location: Locate the electrical junction box in the desired installation area. Ensure the power is OFF.
- Attach Mounting Strap: Secure the mounting strap (A) to the outlet box using the provided outlet box screws (B). Ensure the strap is firmly attached.
- Make Electrical Connections:
- Connect the bare copper ground wire from the fixture to the ground wire from the outlet box (usually bare copper or green) using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire nut.
- Carefully tuck all wires into the outlet box.
- Mount the Fixture: Align the fixture's backplate with the mounting strap. Secure the fixture to the mounting strap using the decorative nuts (C) provided.
- Install the Bulb: Insert one (1) E26 Medium base bulb (not included) into the socket. Do not exceed the maximum wattage of 60W.
- Install the Glass Shade: Carefully place the white alabaster glass shade onto the fixture, securing it according to the design (typically by aligning with retaining clips or screws).
Image: Diagram illustrating the dimensions (12.75" W x 4.5" H x 6.25" EXT) and typical wall mounting position for a Livex Lighting wall sconce, similar to the Wynnewood model.
Operating Instructions
Once installed, restore power at the circuit breaker. The Livex Lighting Wynnewood Wall Sconce is operated via a standard wall switch (Toggle switch type). Simply flip the wall switch to turn the light on or off.
Image: The Livex Lighting Wynnewood 1 Light Wall Sconce illuminated, showcasing the soft glow through the white alabaster glass.
Maintenance
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners or polishes as they may damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing the bulb. Allow the bulb to cool completely. Unscrew the old bulb and replace it with a new E26 Medium base bulb, not exceeding 60 watts.
- Inspection: Periodically check all electrical connections and mounting hardware for tightness.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Livex |
| Model Number | 42700-81 |
| Model Name | Wynnewood |
| Color | Painted Satin Nickel |
| Material | Alloy Steel (Fixture), White Alabaster Glass (Shade) |
| Style | Traditional |
| Light Fixture Form | Wall Sconce |
| Room Type | Bathroom (Suitable for damp locations) |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Control Method | Touch (via wall switch) |
| Light Source | Medium Base (E26) |
| Number of Light Sources | 1 |
| Voltage | 120 Volts |
| Light Color | White (dependent on bulb) |
| Lighting Method | Up/Down Light |
| Wattage | Max 60 watts |
| Bulb Base | E26 Medium |
| Switch Type | Toggle (via wall switch) |
| Water Resistance Level | Water Resistant (Damp Location Rated) |
| Efficiency | Energy Efficient (dependent on bulb) |
| Mounting Type | Wall Mount |
| Required Assembly | Yes |
| Item Dimensions (L x W x H) | 12.75"L x 12.75"W x 4.5"H |
Warranty Information
This Livex Lighting product is covered by a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and claims, please contact Livex Lighting customer support.
Customer Support
For technical assistance, missing parts, or warranty inquiries, please contact Livex Lighting customer support. Refer to the contact information provided with your product packaging or visit the official Livex Lighting website for support details.
Livex Lighting Website: www.livexlighting.com