BLACK+DECKER 18V Cordless Multi-Tool EVO185B1 Instruction Manual

1. Introduction

The BLACK+DECKER 18V Cordless Multi-Tool EVO185B1 is a versatile 3-in-1 power tool designed for various DIY tasks including drilling, screw driving, cutting, and sanding. This single tool replaces the need for multiple dedicated tools, saving space and offering convenience. It features an improved ergonomic design for enhanced usability, a lighter body (approximately 11% lighter than previous models), and an enlarged bit holder capable of storing multiple bits and screws. The included 2.0Ah battery provides approximately 30% longer runtime compared to older 1.5Ah batteries. An integrated LED light facilitates work in dimly lit areas.

2. Safety Information

Always read and understand all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• Always wear appropriate personal protective equipment, including eye protection, hearing protection, and gloves.
• Ensure the tool is switched off before making any adjustments, changing accessories, or storing power tools.
• Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
• Use the power tool, accessories, and tool bits in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

3. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• BLACK+DECKER 18V Multi-Tool Body
• Drill/Driver Head
• Jigsaw Head
• Sander Head
• 18V Lithium-Ion Battery (2.0Ah) x 2
• Rapid Charger (approx. 60 min charge time)
• Dedicated Kit Box
• Drill Bits: 2.5mm, 4mm, 5mm, 6mm, 8mm
• Phillips Bits: #1, #2
• Slotted Bit: #6
• PoziDrive Bit: #2
• Hex Bits: #4, #5
• Wood Cutting Blades: 6TPI x 2, 10TPI x 2
• Curve Cutting Blade x 1
• Sandpaper: #80 grit x 5, #120 grit x 5
• Dust Collection Adapter

4. Product Overview

The EVO185B1 Multi-Tool consists of a main power unit and interchangeable heads for different functions. Familiarize yourself with the main components before operation.

Main Power Unit

• Trigger Switch: Activates the tool.
• Head Release Button: Used to detach and attach different tool heads.
• Battery Port: For inserting the 18V lithium-ion battery.
• LED Work Light: Illuminates the work area.

Interchangeable Heads

• Drill/Driver Head: For drilling holes and driving screws. Features an 11-stage clutch and keyless chuck.
• Jigsaw Head: For cutting wood and other materials. Equipped with a blade for straight and curved cuts.
• Sander Head: For sanding and finishing surfaces. Uses hook-and-loop sandpaper for easy changes.

5. Setup

5.1 Charging the Battery

1. Connect the rapid charger to a standard power outlet.
2. Slide the 18V lithium-ion battery into the charger. Ensure it clicks into place.
3. The charging indicator light on the charger will show the charging status. A full charge takes approximately 60 minutes.
4. Once fully charged, remove the battery from the charger.

5.2 Attaching/Detaching Tool Heads

1. Ensure the main power unit is switched off and the battery is removed for safety.
2. To attach a head, align the head with the main power unit. Push the head firmly onto the unit until it clicks into place.
3. To detach a head, press the head release button and pull the head away from the main power unit.

5.3 Inserting the Battery

1. Align the charged battery with the battery port on the main power unit.
2. Slide the battery into the port until it locks securely.
3. To remove the battery, press the battery release button (if present) and slide the battery out.

6. Operating Instructions

6.1 Drill/Driver Operation

1. Attach the Drill/Driver head to the main unit.
2. Open the keyless chuck by rotating it counter-clockwise. Insert the desired drill bit or screwdriver bit into the chuck.
3. Tighten the chuck by rotating it clockwise until the bit is securely held.
4. Adjust the clutch setting (1-11) according to the material and screw size. Lower settings are for smaller screws and softer materials, higher settings for larger screws and harder materials.
5. Position the tool on the workpiece. Press the trigger switch to start. The LED light will illuminate the work area.
6. Apply steady pressure and maintain control.

6.2 Jigsaw Operation

1. Attach the Jigsaw head to the main unit.
2. Insert the appropriate jigsaw blade for your material. Ensure it is securely locked in place.
3. Secure the workpiece to prevent movement during cutting.
4. Place the base plate of the jigsaw head flat on the workpiece.
5. Press the trigger switch to start the blade. Allow the blade to reach full speed before engaging the material.
6. Guide the jigsaw along the cutting line, applying gentle forward pressure. Do not force the tool.

6.3 Sander Operation

1. Attach the Sander head to the main unit.
2. Attach the desired grit sandpaper to the sanding pad using the hook-and-loop system.
3. Ensure the workpiece is stable.
4. Place the sander flat on the surface to be sanded.
5. Press the trigger switch to start the sander.
6. Move the sander in smooth, overlapping passes across the surface. Avoid applying excessive pressure, as this can reduce efficiency and damage the surface.
7. For dust collection, attach the dust collection adapter and connect it to a suitable vacuum cleaner.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your tool.

• Cleaning: Keep the tool's ventilation slots clean to prevent overheating. Use a soft, damp cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.
• Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods.
• Accessory Inspection: Regularly inspect drill bits, jigsaw blades, and sandpaper for wear or damage. Replace worn accessories to maintain performance and safety.
• Storage: Store the tool and its accessories in the dedicated kit box in a dry, secure location out of reach of children.

8. Troubleshooting

If you encounter issues with your BLACK+DECKER Multi-Tool, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact BLACK+DECKER customer support.

9. Specifications

10. Warranty and Support

10.1 Warranty Information

This BLACK+DECKER Multi-Tool EVO185B1 is covered by a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or normal wear and tear.

10.2 Customer Support

For technical assistance, warranty claims, or to purchase replacement parts and accessories, please visit the official BLACK+DECKER website or contact their customer service department. Keep your proof of purchase for warranty validation.

Official BLACK+DECKER Store: BLACK+DECKER Store on Amazon.co.jp