GCHT GAMING Wireless Controller Instruction Manual

Introduction

Thank you for purchasing the GCHT GAMING Wireless Controller. This controller is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, Switch OLED, PC, and Android devices. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

Product Features

• Wide Compatibility: Supports Nintendo Switch, Switch OLED, PC, and Android devices.
• Dual-Motor Vibration: Built-in dual motors provide adjustable vibration feedback for an immersive gaming experience.
• 6-Axis Gyro Sensor: Enhances motion control and precise direction sensing in compatible games.
• NFC Function: Supports Amiibo scanning for in-game content (Nintendo Switch only).
• Turbo Function: Customizable auto-fire settings for rapid button presses.
• One-Key Wake Up: Conveniently wake up your Nintendo Switch console from sleep mode.
• Ergonomic Design: Comfortable grip for extended gaming sessions.
• Long Battery Life: Integrated 500mAh battery provides up to 10 hours of playtime.

Controller Layout

Familiarize yourself with the buttons and their functions:

• Left Analog Stick: Movement and camera control.
• D-Pad: Directional input.
• Home Button: Power on/off, wake up console, return to home screen.
• Screenshot Button: Capture screenshots.
• Minus (-) Button: Select/Menu button.
• L/ZL Buttons: Left shoulder and trigger buttons.
• Right Analog Stick: Movement and camera control.
• A/B/X/Y Buttons: Action buttons.
• Plus (+) Button: Start/Menu button.
• Turbo Button: Activates/deactivates Turbo function.
• R/ZR Buttons: Right shoulder and trigger buttons.
• NFC Detection Area: Located near the GCHT GAMING logo (for Amiibo).

Setup

1. Charging the Controller

Before first use, fully charge the controller. Connect the included USB-C cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, PC, or USB wall adapter). The indicator lights will show charging status and turn off when fully charged.

2. Pairing with Nintendo Switch/Switch OLED

1. From the HOME Menu, select 'Controllers' > 'Change Grip/Order'.
2. On the controller, press and hold the 'Home' button for 3-5 seconds until the four LED indicators flash rapidly.
3. Once paired, the corresponding player LED(s) on the controller will remain solid.
4. To wake up the console from sleep mode, simply press the 'Home' button on the controller.

3. Pairing with PC (Windows)

Connect the controller to your PC using a USB-C cable. The controller will be recognized as a wired gamepad. For wireless connection, a Bluetooth adapter may be required. Follow your PC's Bluetooth pairing instructions, typically by holding the 'Home' button on the controller until LEDs flash, then selecting it in your PC's Bluetooth settings.

4. Pairing with Android Devices

Enable Bluetooth on your Android device. On the controller, press and hold the 'Home' button until the LEDs flash rapidly. Select the controller from the list of available Bluetooth devices on your Android device to pair.

Operating Instructions

1. Power On/Off

• Power On: Press the 'Home' button. The controller will attempt to connect to the last paired device.
• Power Off: Press and hold the 'Home' button for 5 seconds. The controller will also automatically enter sleep mode after 5 minutes of inactivity.

2. Turbo Function

The Turbo function allows for rapid, continuous pressing of a button. To set up Turbo:

1. Press and hold the 'Turbo' button, then press the desired action button (A/B/X/Y/L/R/ZL/ZR) once to activate Turbo for that button.
2. To adjust Turbo speed, press the 'Turbo' button and the Right Analog Stick Up/Down. There are typically three speed settings.
3. To clear Turbo for a single button, press and hold the 'Turbo' button, then press the action button again.
4. To clear all Turbo settings, press and hold the 'Turbo' button for 5 seconds.

3. Vibration Adjustment

The controller features adjustable vibration intensity. To change the vibration level:

• Press and hold the 'Turbo' button, then press the D-Pad Up/Down to cycle through vibration intensities (e.g., Strong, Medium, Weak, Off).

4. NFC Function (Nintendo Switch Only)

The controller supports Amiibo figures. To use the NFC function:

1. Ensure the game supports Amiibo functionality.
2. When prompted in-game, place your Amiibo figure on the NFC detection area of the controller (usually near the GCHT GAMING logo).

5. Motion Control / Gyro Sensor

The built-in 6-axis gyro sensor provides precise motion control for games that support it. No special setup is required; the controller will automatically utilize motion controls when connected to a compatible device and game.

6. Screenshot Function

Press the 'Screenshot' button (usually a square icon) to capture in-game screenshots on your Nintendo Switch console.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in constant use. If storing for an extended period, charge it to about 50% every few months.

Troubleshooting

• Controller won't connect: Ensure the controller is charged. Try re-pairing the controller by following the setup instructions. For Switch, ensure 'Pro Controller Wired Communication' is enabled in console settings if using wired.
• Input lag or disconnection: Ensure there are no strong electromagnetic interferences nearby. Move closer to the console/device. Ensure the controller is fully charged.
• Buttons not responding: Check if the controller is properly paired. Try resetting the controller (if a reset button is available, usually a small pinhole on the back).
• Vibration too strong/weak: Adjust vibration intensity using the 'Turbo' + D-Pad Up/Down combination as described in the Operating Instructions.
• NFC not working: Ensure the game supports Amiibo. Place the Amiibo correctly on the NFC detection area.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact GCHT GAMING customer service through the retailer where the product was purchased. Keep your purchase receipt for warranty claims.