Introduction
Thank you for choosing the EZ Simpli Comfy Bed Queen Self-Inflating Air Mattress. This manual provides essential instructions for the safe and efficient use, setup, operation, and maintenance of your air mattress. Please read it thoroughly before initial use and retain it for future reference.
Setup
Setting up your EZ Simpli Comfy Bed is designed to be quick and easy, typically taking less than 3 minutes.
- Unpack the Mattress: Place the wheeled carrying case on a flat, clear surface. Unzip the case and lay it open. The bed frame will be folded inside.
- Position the Bed: Gently pull the bed out of the case. As you do, the self-deploying frame will begin to unfold. Ensure there is enough space around the bed for the frame to fully extend.
- Connect to Power: Locate the built-in pump on the side of the mattress. Plug the power cord into a standard electrical outlet.
- Inflate the Mattress: Turn the pump dial to the 'Inflate' position. The mattress will begin to inflate automatically, and the 16 powder-coated steel legs of the frame will fully extend, raising the bed to a comfortable height.
- Adjust Firmness: Once fully inflated (approximately 3 minutes), you can adjust the firmness to your preference by allowing a small amount of air to escape or adding more air. Turn the dial to 'Off' when desired firmness is reached.
Setup Videos
This video demonstrates the built-in frame and pump feature of the Simpli Comfy EZ Bed Air Mattress, showing its automatic setup process.
This video illustrates the quick setup of the EZ Bed with its built-in frame, pump, and how it packs into its wheeled case.
Watch how the Simpli Comfy EZ Bed transforms into an extra bed within 3 minutes, highlighting its rapid inflation.
Operating Instructions
Inflation
To inflate the mattress, ensure the power cord is securely plugged into an electrical outlet. Locate the built-in pump dial and turn it clockwise to the 'Inflate' position. The pump will automatically begin to fill the mattress with air. The mattress will reach full inflation in approximately 3 minutes. Once the desired firmness is achieved, turn the dial to the 'Off' position.
Deflation and Storage
To deflate the mattress, ensure the power cord is plugged in. Turn the pump dial counter-clockwise to the 'Deflate' position. The pump will actively remove air from the mattress. As the mattress deflates, the frame will automatically fold inward. Once fully deflated, gently push the frame legs back into their compact position and zip the mattress back into its wheeled carrying case for convenient storage and transport.
Maintenance
Proper maintenance ensures the longevity and performance of your EZ Simpli Comfy Bed.
- Cleaning: Clean the airbed surface with a damp cloth soaked in mild soap and water. Do not use harsh chemicals or abrasive cleaners.
- Storage: Ensure the mattress is completely dry before storing. Store in its wheeled carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
- Puncture Prevention: Keep the air mattress away from sharp objects, rough surfaces, and pets to prevent punctures.
- Heat Sources: Keep the mattress away from naked flames and direct heat sources to prevent damage to the PVC material.
Troubleshooting
Mattress Loses Air Overnight
While the EZ Simpli Comfy Bed is built with reinforced support and enhanced seam sealing to maintain consistent firmness, slight pressure changes can occur due to temperature fluctuations or normal use. This is common for inflatable products. If significant air loss occurs:
- Check Valve Seal: Ensure the pump dial is firmly in the 'Off' position and the valve is completely sealed.
- Inspect for Leaks: Carefully inspect the mattress surface and seams for any punctures or small holes. A repair patch is included for minor repairs.
- Environmental Factors: Cooler temperatures can cause air to contract, leading to a softer mattress. Re-inflate briefly to desired firmness if needed.
Discomfort
The mattress features ComfortCoil technology for stability. If you find the firmness uncomfortable, you may adjust it by slightly deflating the mattress to a softer level. For enhanced comfort, a mattress topper can be used.
Specifications
| Feature | Detail |
|---|---|
| Size | Queen |
| Product Dimensions (L x W x Th) | 80" x 62" x 24" |
| Item Weight | 60 pounds |
| Weight Capacity Maximum | 700 pounds |
| Material (Air Mattress) | Heavy-duty PVC with waterproof flocked top |
| Material (Frame) | Alloy Steel |
| Special Features | Built-In Frame, Built-In Pump, Compact, Puncture Resistant, Wheeled Case |
| Construction Type | ComfortCoil™ Technology Construction |
| Included Components | Repair Patch, User Guide |
| Power (Pump) | 120Vac 60Hz, 1.33A 160W |
Warranty & Support
Warranty Information
The EZ Simpli Comfy Bed Queen Self-Inflating Air Mattress comes with a 1-year warranty against manufacturer defects. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, assistance, or to report a defect, please contact Simpli Comfy Inc. customer support. Refer to the contact information provided with your product packaging or visit the official Simpli Comfy website for support details.