Yaheetech YT-00097063-01

Yaheetech Dining Chairs (Model: YT-00097063-01) Instruction Manual

Fabric Upholstered Dining Room Chairs with Button Tufted High Back and Solid Wood Legs

Introduction

This manual provides comprehensive instructions for the assembly, safe use, and maintenance of your Yaheetech Dining Chairs. These chairs are designed for comfort and durability, featuring a button-tufted high back, fabric upholstery, and solid wood legs, making them suitable for various indoor settings such as dining rooms, kitchens, and living rooms. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.

Important Safety Information

WARNING: This product requires simple assembly. Always follow the enclosed manual for safe assembly. Do not exceed the maximum weight capacity of 276 pounds. This chair is intended for indoor use only.

Package Contents

Please verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact customer support.

Setup and Assembly Instructions

Follow these steps carefully to assemble your dining chairs. It is recommended to have two people for easier assembly.

  1. Step 1: Attach Legs to Seat Frame.

    Carefully place the chair seat upside down on a soft, clean surface. Identify the front and rear legs. Attach each leg to the corresponding corner of the seat frame using the provided screws and washers. Hand-tighten screws initially.

    Diagram showing chair legs being aligned and partially screwed into the seat frame.

    Image: Step 1 of assembly, showing how to align and partially tighten screws for the chair legs into the seat frame.

  2. Step 2: Verify Stability.

    Once all legs are attached, carefully turn the chair upright. Place it on a flat, level surface. Gently press down on the seat to ensure all legs make even contact with the floor. If the chair wobbles, slightly loosen the screws, adjust the leg position, and then proceed to tighten.

    Diagram showing a chair being placed upright to check for wobbling, with arrows indicating adjustment.

    Image: Step 2 of assembly, illustrating how to check for chair stability and adjust if wobbling occurs.

  3. Step 3: Fully Tighten All Screws.

    Using the provided Allen wrench, securely tighten all screws on the legs. Ensure they are firm but do not overtighten, as this can damage the wood. Re-check stability after tightening.

    Diagram showing screws being fully tightened on the chair legs.

    Image: Step 3 of assembly, demonstrating the final tightening of all screws for secure chair assembly.

  4. Step 4: Adjust Foot Pads.

    Each leg is equipped with adjustable foot pads. If the chair still exhibits slight wobbling on an uneven surface, rotate the foot pads at the bottom of the legs to achieve perfect balance and prevent floor scratches.

    Close-up image of an adjustable foot pad on a chair leg, showing how to rotate it for height adjustment.

    Image: Detail of an adjustable foot pad, illustrating how to rotate it to level the chair and protect flooring.

Operating Instructions

Your Yaheetech Dining Chairs are designed for comfortable and stable seating. To ensure optimal use and longevity:

Maintenance and Care

Proper maintenance will extend the life and appearance of your dining chairs.

Troubleshooting

ProblemPossible CauseSolution
Chair wobbles after assembly.Screws are not fully tightened or legs are uneven.Ensure all screws are securely tightened. Adjust the foot pads on the bottom of each leg until the chair is stable.
Difficulty aligning parts during assembly.Parts may be misaligned or screws overtightened prematurely.Loosen all screws slightly, realign the parts, and then gradually tighten all screws evenly. Do not fully tighten until all parts are in place.
Fabric appears stained or dirty.Accumulated dirt or spills.Wipe with a damp cloth. For stubborn stains, use a mild fabric cleaner on an inconspicuous area first. Blot, do not rub.

Product Specifications

FeatureDetail
BrandYaheetech
Model NameYT-00097063-01
ColorDark Gray
Product Dimensions24.5"D x 18"W x 39"H
SizeSet of 2
Back StyleTufted Back
Special FeatureSturdy, Adjustable Foot Pads
Product Care InstructionsWipe Clean
Maximum Weight Recommendation276 Pounds
StyleModern
PatternSolid
Room TypeBedroom, Dining Room, Kitchen, Living Room
Fill MaterialFoam
Furniture FinishRubberwood
Item Weight28.2 pounds (for the set)
Seat Height20 Inches
Seat Depth17 inches

Note: All dimensions are approximate and may vary slightly.

Warranty Information

Specific warranty details for this product are not provided in the available information. For warranty inquiries or to understand the terms and conditions, please contact Yaheetech customer support directly or refer to the product packaging.

Customer Support

For further assistance, missing parts, or any questions regarding your Yaheetech Dining Chairs, please contact Yaheetech customer service. You can often find contact information on the product packaging or by visiting the official Yaheetech store online.

Official Yaheetech Store: Yaheetech Store on Amazon

Related Documents - YT-00097063-01

PreviewYaheetech 593172 Patio Dining Chairs Assembly Instructions
This document provides assembly instructions for the Yaheetech 593172 patio dining chairs. It includes safety warnings, assembly steps with diagrams, and product care instructions in multiple languages.
PreviewYaheetech Ergonomic Gaming Chair Installation Guide
Step-by-step instructions and parts list for assembling your Yaheetech ergonomic gaming chair, featuring massage lumbar support and adjustable footrest. Ensure proper setup for optimal comfort and performance.
PreviewYaheetech Dining Chair Assembly Instructions (Model 611269)
Step-by-step assembly guide for the Yaheetech Dining Chair, Model 611269. Includes safety precautions, parts identification, and detailed instructions for building your chair.
PreviewYaheetech Lift Top Coffee Table (Model 610904) Assembly Instructions
Detailed assembly instructions for the Yaheetech Lift Top Coffee Table (Model 610904), including safety guidelines, parts list, hardware, and step-by-step assembly procedures.
PreviewYaheetech 611975 Lift Top Coffee Table Assembly Instructions
Detailed assembly instructions for the Yaheetech 611975 Lift Top Coffee Table. Learn how to assemble your coffee table with hidden storage and adjustable top using step-by-step guides and part lists.
PreviewBennir Solid Wood Folding Adirondack Chair Assembly Instructions
Comprehensive assembly instructions for the Bennir Solid Wood Folding Adirondack Chair by Yaheetech, including a detailed parts list and step-by-step guidance for assembly.