Introduction
This manual provides essential information for the safe and effective use of your yan 6' AC Power Cord, specifically designed for compatibility with Sharp LC-42SB45UT LCD LED TVs and other devices requiring a standard 3-prong power connection. Please read this manual thoroughly before use.
Product Overview
This image displays the yan 6' AC Power Cord. On the left, the NEMA 5-15P male plug, commonly known as a standard North American 3-prong plug, is visible. On the right, the IEC-320-C13 female connector, often referred to as a 'kettle lead' connector, is shown. The cable itself is black and appears to be of a standard thickness, indicating its 18 AWG gauge. The overall length of the cord is 6 feet.
The yan 6' AC Power Cord is a replacement or spare power cable for various electronic devices. It features a NEMA 5-15P male plug for connecting to standard wall outlets and an IEC-320-C13 female connector for connecting to compatible devices. Its 18 AWG gauge ensures reliable power delivery.
Setup
- Identify the Device Port: Locate the power input port on your device (e.g., Sharp LC-42SB45UT LCD LED TV). This port should be compatible with an IEC-320-C13 connector.
- Connect to Device: Firmly insert the IEC-320-C13 female connector end of the power cord into the corresponding power input port on your device. Ensure it is fully seated.
- Connect to Power Outlet: Insert the NEMA 5-15P male plug end of the power cord into a standard, grounded 3-prong AC wall outlet. Ensure the outlet provides the correct voltage for your device.
- Verify Connection: Confirm that both ends of the power cord are securely connected. Avoid loose connections, which can lead to intermittent power or electrical hazards.
No additional tools or software are required for the setup of this power cord.
Operating
The yan 6' AC Power Cord functions as a conduit for electrical power. Once properly connected, it will supply power to your device from the wall outlet. There are no operational controls on the cord itself.
- Safe Usage: Always ensure the power cord is not kinked, pinched, or placed under heavy objects.
- Environmental Conditions: Use the power cord in dry indoor environments. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
- Unplugging: When disconnecting, always grasp the plug firmly and pull from the outlet or device. Do not pull by the cord itself, as this can damage the internal wiring.
Maintenance
- Cleaning: Periodically wipe the cord and connectors with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
- Inspection: Regularly inspect the cord for any signs of damage, such as cuts, fraying, or exposed wires. Check the plugs for bent prongs or cracks.
- Storage: When not in use, coil the cord loosely. Avoid tight coiling or bending, which can stress the internal wires. Store in a cool, dry place away from direct heat sources.
Do not attempt to repair a damaged power cord. A damaged cord can pose a fire or electrical shock hazard. Replace any damaged cord immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Loose connection. | Ensure both ends of the power cord are fully and securely inserted into the device and the wall outlet. |
| Device does not power on. | No power from outlet. | Test the wall outlet with another known working device or appliance. Check your home's circuit breaker if necessary. |
| Device does not power on. | Damaged power cord. | Inspect the power cord for visible damage (cuts, fraying, bent prongs). If damaged, discontinue use and replace the cord. |
| Device does not power on. | Device malfunction. | If the power cord and outlet are confirmed to be working, the issue may lie with the device itself. Consult the device's manual or manufacturer. |
If troubleshooting steps do not resolve the issue, do not attempt to disassemble or repair the power cord or your device. Contact the seller or a qualified technician.
Specifications
- Model: LC-42SB45UT (Compatible with Sharp LC-42SB45UT LCD LED TV)
- Brand: yan
- Length: 6 feet (approximately 1.83 meters or 72 inches)
- Gauge: 18 AWG (American Wire Gauge)
- Connector 1: NEMA 5-15P Male (3-prong standard North American plug)
- Connector 2: IEC-320-C13 Female (C13 'kettle lead' connector)
- Voltage Rating: Standard household voltage (typically 125V in North America)
- Current Rating: Suitable for devices requiring up to 10A (typical for 18 AWG C13 cords)
Warranty and Support
Specific warranty terms for this product are provided by the seller or manufacturer at the time of purchase. Please refer to your purchase documentation or contact the seller directly for detailed warranty information.
For technical support or inquiries regarding this product, please contact the seller through the platform where the purchase was made. Provide your order number and a clear description of your issue for prompt assistance.