1. Introduction
This manual provides essential instructions for the proper use, setup, and maintenance of your yan 6-foot AC Power Cable. This cable is designed as a replacement or spare power cord for specific Technics audio equipment models, including SA-AX720, SA-AX810, SA-AX910, SA-AX910, SA-AX920, and SA-CH455. Please read this manual thoroughly before connecting the cable to ensure safe and effective operation.
2. Product Overview
The yan AC Power Cable is a 6-foot polarized power cord featuring a NEMA 1-15P 2-pin male plug on one end and an IEC320 C7 female connector on the other. It is constructed with 18 AWG wire for reliable power delivery and is UL Listed for safety compliance.
This image displays the 6-foot yan AC Power Cable. On the left is the IEC320 C7 female connector, designed to plug into compatible audio equipment. On the right is the NEMA 1-15P male plug, which connects to a standard wall outlet. The cable is black and features a polarized design.
Key Features:
- Length: 6 feet (1.8 meters)
- Connectors: 1x IEC320 C7 Female, 1x NEMA 1-15P 2-pin Male
- Wire Gauge: 18 AWG
- Polarization: Polarized style for correct electrical connection
- Certification: UL Listed
- Compatibility: Technics SA-AX720, SA-AX810, SA-AX910, SA-AX920, SA-CH455
3. Setup Instructions
Follow these steps to properly connect your AC power cable:
- Verify Compatibility: Ensure your Technics audio equipment model (SA-AX720, SA-AX810, SA-AX910, SA-AX920, or SA-CH455) requires an IEC320 C7 type power cable.
- Power Off Equipment: Before connecting, ensure your audio equipment is turned off and unplugged from any power source.
- Connect to Equipment: Insert the IEC320 C7 female connector (the end with two small holes) firmly into the corresponding power inlet on the back of your Technics audio equipment. Ensure it is fully seated.
- Connect to Power Outlet: Insert the NEMA 1-15P male plug (the flat two-prong end) into a standard, grounded 120V AC wall outlet. Ensure the outlet is easily accessible.
- Power On: Once both ends are securely connected, you may power on your audio equipment.
Safety Note: Always ensure the power outlet is easily accessible to quickly disconnect power if needed. Do not force connectors. If the cable does not fit, re-verify compatibility.
4. Operating Instructions
This AC power cable functions as a direct power conduit for your compatible Technics audio equipment. Once properly connected as described in the Setup section, the cable provides the necessary electrical power for your device to operate. There are no specific operational controls on the cable itself.
- Ensure the cable is not kinked, pinched, or placed under heavy objects.
- Avoid running the cable through high-traffic areas where it could be tripped over or damaged.
- Do not use the cable if it shows any signs of damage, such as frayed wires or exposed conductors.
5. Maintenance
Proper maintenance ensures the longevity and safe operation of your power cable:
- Cleaning: Disconnect the cable from both the wall outlet and the equipment before cleaning. Wipe the cable with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use, coil the cable loosely. Avoid tight coiling or bending, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the cable for any signs of wear, cuts, fraying, or damage to the connectors. If any damage is observed, discontinue use immediately and replace the cable.
6. Troubleshooting
If your equipment is not receiving power after connecting the cable, consider the following:
- No Power to Equipment:
- Ensure both ends of the power cable are fully and securely inserted into the equipment and the wall outlet.
- Check if the wall outlet is functional by plugging in another known working device.
- Verify that the power switch on your Technics equipment is in the 'ON' position.
- Inspect the cable for any visible damage. If damaged, replace it immediately.
- Loose Connection: If the cable feels loose, gently push it in further. If it consistently remains loose, the connector on either the cable or the equipment may be worn.
If troubleshooting steps do not resolve the issue, consult the user manual for your Technics audio equipment or contact a qualified technician.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | yan |
| Length | 6 Feet (approx. 1.8 meters) |
| Connector Gender | Male-to-Female |
| Male Plug Type | NEMA 1-15P (2-pin) |
| Female Connector Type | IEC320 C7 |
| Wire Gauge | 18 AWG |
| UL Listed | Yes |
| Color | Black |
8. Warranty and Support
This product is manufactured by yan. For specific warranty information or support inquiries, please refer to the seller or manufacturer's official channels where the product was purchased. Keep your purchase receipt as proof of purchase.
For general inquiries regarding the use of this power cable with your Technics equipment, please consult the original Technics equipment manual or contact Technics customer support.