ProKnee 0714 Custom Fit Knee Pads User Manual

1. Product Overview

The ProKnee Model 0714 Custom Fit Knee Pads are designed for professionals in flooring installation and other construction trades. These knee pads feature a lightweight, heavy-duty construction, a custom-molded shin-to-knee contact area, and a patented shin support system to enhance comfort and performance during extended use.

Image: A pair of ProKnee 0714 Custom Fit Knee Pads. One pad is upright, showcasing the shin support, while the other is resting on its knee cup.

Key Features:

• Custom Fit Design: Ensures optimal comfort and support based on individual leg measurements.
• Replaceable Parts: All components are designed for easy and economical replacement, extending product lifespan.
• Maximum Comfort: Features 1-inch cushion inserts and strategically placed straps to prevent pinching and circulation issues.
• Shock Absorption & Stability: Knee pocket shape and cellular urethane cushions provide joint stability and absorb impact.
• Durable Construction: Molded from fiberglass-reinforced plastic resin with a non-marking 3-ply polynitrile rubber boot.

2. Setup and Custom Fitting

Proper fitting is essential for comfort and performance. Follow these steps to determine your correct knee pad size and model.

Measuring for Your Custom Fit:

1. Remove Shoes: Ensure you are barefoot for accurate measurement.
2. Measure Length (Size): While standing, measure from the floor (point A) to the top of your kneecap (point B). Round up to the nearest 1/2 inch. This measurement determines your knee pad size (e.g., 20.5 inches).
3. Measure Calf Circumference (Model): With work pants on, measure around the widest part of your calf muscle (point C). A measurement of 17.5 inches or larger typically requires the Model 0714E Wide. For calf measurements below 17.5 inches, the Model 0714 Standard is usually appropriate. In rare cases, a wider calf with a narrow knee may still require the Standard model.

Image: An illustration detailing the three measurement points (A, B, C) on a leg for determining knee pad size and model.

Important Measurement Guidelines:

• The top of the kneepad should align with the top of your kneecap, +/- 1/4 inch.
• Do not measure with shoes on, as this can lead to the kneepad fitting too high.
• Do not measure to the bottom of the kneecap, as this can result in the kneepad fitting too short.
• Avoid measuring the length of old knee pads or from the top of your foot.
• Ensure your tape measure is flat and not slanting or buckling.
• Do not sit or measure with legs in a slanted position, as this can lead to inaccurate results.

Image: Visual examples demonstrating correct and incorrect methods for measuring leg length and calf circumference for knee pad fitting.

Adjusting the Straps:

The knee pads feature Silicone Gripper Elastic Straps and Smartlock Plus Quick Release Buckles for a secure and comfortable fit.

• Silicone Gripper Elastic Straps: These straps allow the Smartlock Plus buckle to grip securely, preventing overtightening and slippage.
• Smartlock Plus Quick Release Buckle: This ergonomic buckle automatically locks your preferred strap length with a simple pull, ensuring a consistent and comfortable fit throughout the workday.

Image: A close-up of a person adjusting the quick-release buckle on a ProKnee knee pad strap.

3. Operating Instructions

Once properly fitted, your ProKnee 0714 knee pads are ready for use. They are designed to provide stability and protection across various work surfaces.

Wearing the Knee Pads:

• Ensure the knee pads are securely fastened with the straps positioned below the knee joint to avoid uncomfortable pinching and maintain circulation.
• The knee pocket shape is designed to surround and stabilize the knee joint, reducing joint wear and discomfort.
• The toe spring, angled at 10.5 degrees, facilitates natural movement when walking on your knees.
• The anti-twist cuff wraps around 9 inches of the lower leg, integrated into the design to prevent twisting during movement.

Image: A worker demonstrating the use of ProKnee knee pads while kneeling on a wooden floor.

Performance and Protection:

• The 1-inch cushion inserts provide maximum comfort and protection, absorbing shock from daily kneeling activities.
• The flat bottom design and knee pocket shape contribute to even weight distribution, reducing pressure on specific knee points.
• The tough, non-marking 3-ply white polynitrile rubber boot with 3/16-inch thick non-skid construction allows kneeling on various surfaces without damage or slippage.

Image: A ProKnee knee pad protecting the user's knee while kneeling on a surface covered with screws.

Image: A diagram showing how weight is evenly distributed across the knee pad, from the knee to the shin, reducing pressure points.

4. Maintenance and Part Replacement

ProKnee knee pads are designed for longevity with fully replaceable components, allowing for easy maintenance and upgrades.

Replacing Components:

• Molded-in frame components facilitate simple, fast, and economical part replacement.
• ProKnee offers a variety of individual parts and kits to suit specific needs, enabling users to upgrade or replace components as required.
• The boot plate shields the frame-ribbing, extending the life of the rubber boot.
• The modular curved strap/buckle mount pre-shapes and protects the anti-twist cuff, which in turn extends the life of the cushion inserts.

Image: A visual comparison of an old, worn knee pad and a new one, emphasizing the product's design for durability and part replacement.

5. Troubleshooting and Fit Adjustments

If you experience discomfort or improper fit, review the following common issues and solutions.

Common Fit Issues:

• Kneepad too high: Often caused by measuring with shoes on. Re-measure barefoot from the floor to the top of the kneecap.
• Kneepad too short: Can result from measuring to the bottom of the kneecap, sitting during measurement, or measuring with slanted legs. Ensure standing, straight leg measurement to the top of the kneecap.
• Incorrect calf width: If the knee pad feels too tight or loose around the calf, re-verify your calf circumference measurement with work pants on. A measurement of 17.5 inches or larger typically indicates a need for the Model 0714E Wide.

Cushion Insert Selection:

ProKnee offers cushion inserts in two thicknesses: 5/8 inch and 1 inch. The choice of cushion can impact fit and comfort.

• 1-inch Cushion Inserts: Recommended for users who work on their knees 8+ hours a day, have a history of knee problems or surgery, weigh 200+ lbs, or prefer maximum protection.
• 5/8-inch Cushion Inserts: Preferred by some users with thinner legs or smaller builds (men and women) for a deeper knee cup fit, though they offer less cushioning than the 1-inch option.

Image: A visual comparison of the 1-inch and 5/8-inch cushion inserts, showing the difference in thickness and how they fit into the knee pad models.

6. Specifications

Image: An exploded view diagram highlighting the various components and key features of the ProKnee 0714 Standard and Wide models.

7. Support Information

For further assistance, inquiries about parts, or specific product support, please refer to the manufacturer's official channels.

Manufacturer: ProKnee

Please visit the ProKnee Store on Amazon for additional product information and contact options.