COOLSOUND Bluetooth Speaker XS 10W Black User Manual

Introduction

Thank you for choosing the COOLSOUND XS Bluetooth Speaker. This portable speaker delivers 10W of audio power, offers up to 4 hours of battery life, and features USB and MicroSD card support. It also includes hands-free calling functionality and is IPX4 water-resistant, making it suitable for various environments. Please read this manual carefully before using the product to ensure proper operation and maintenance.

Safety Information

• Do not expose the speaker to extreme temperatures or direct sunlight for prolonged periods.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not disassemble, repair, or modify the speaker yourself. This will void the warranty.
• Keep the speaker away from water and liquids, despite its IPX4 rating, to prevent damage.
• Use only the specified charging cable and adapter.
• Keep out of reach of children.

Package Contents

Please check the package for the following items:

• COOLSOUND XS Bluetooth Speaker (1 piece)
• USB Charging Cable
• User Manual

Product Overview

Figure 1: Front view of the COOLSOUND XS Bluetooth Speaker. It features a black mesh exterior, a prominent red square logo with a stylized 'G' or 'C' on the front, and a grey braided wrist strap attached to the base.

The COOLSOUND XS Bluetooth Speaker is designed for portability and ease of use. Key components include:

• Power Button: Located on the top/side for turning the speaker on/off.
• Volume Buttons: For adjusting audio levels.
• Play/Pause Button: For controlling music playback and answering calls.
• Mode Button: To switch between Bluetooth, USB, and MicroSD modes.
• Charging Port: USB port for charging the speaker.
• MicroSD Card Slot: For playing music directly from a MicroSD card.
• Microphone: For hands-free calling.

Setup

1. Charging the Speaker

1. Connect the provided USB charging cable to the speaker's charging port.
2. Connect the other end of the USB cable to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator will illuminate to show charging status. It will turn off or change color when fully charged.
4. A full charge typically takes approximately 2-3 hours.

2. Powering On/Off

• To Power On: Press and hold the Power button for 2-3 seconds until you hear an audible prompt or see the LED indicator light up.
• To Power Off: Press and hold the Power button again for 2-3 seconds until you hear an audible prompt or the LED indicator turns off.

Operating Instructions

1. Bluetooth Pairing

1. Ensure the speaker is powered on and in Bluetooth pairing mode (the LED indicator will typically flash rapidly).
2. On your mobile device (smartphone, tablet, computer), enable Bluetooth.
3. Search for available Bluetooth devices. You should see "COOLSOUND XS" or a similar name in the list.
4. Select "COOLSOUND XS" to pair. Once successfully paired, the speaker will provide an audible confirmation, and the LED indicator will stop flashing and remain solid.
5. The speaker will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.

2. Music Playback

• Play/Pause: Press the Play/Pause button once to play or pause music.
• Volume Up: Press the Volume Up button.
• Volume Down: Press the Volume Down button.
• Next Track: Press and hold the Volume Up button (or specific button if available).
• Previous Track: Press and hold the Volume Down button (or specific button if available).

3. Hands-Free Calling

• When a call comes in, the music will pause.
• Answer Call: Press the Play/Pause button once to answer an incoming call.
• End Call: Press the Play/Pause button once during a call to end it.
• Reject Call: Press and hold the Play/Pause button for 2 seconds to reject an incoming call.

4. USB/MicroSD Playback

• Insert a USB drive or MicroSD card (with music files) into the respective slot.
• The speaker will automatically switch to USB/MicroSD mode and begin playing music. If not, press the Mode button to switch.
• Use the Play/Pause and Volume buttons to control playback as described above.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe the surface of the speaker. Do not use abrasive cleaners or solvents.
• Storage: Store the speaker in a cool, dry place when not in use for extended periods.
• Battery Care: To prolong battery life, fully charge the speaker before first use and recharge it at least once every three months if not used regularly.

Troubleshooting

Specifications

Note: Specifications are subject to change without prior notice.

Warranty and Support

COOLSOUND products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official COOLSOUND website. If you encounter any issues or have questions regarding your speaker, please contact COOLSOUND customer support through the contact information provided on our website or your purchase platform.

Please retain your proof of purchase for warranty claims.