Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Leader WATCH WINDERS S2306 Automatic Watch Winder. An automatic watch winder is a device designed to keep self-winding automatic watches running when not worn. This prevents the watch from stopping, eliminating the need to reset the time and complex functions like date or moon phase. Your S2306 winder is equipped with advanced features to ensure optimal care for your timepieces.
Product Features
- Six Individually Programmed Rotors: Each winder position can be set independently.
- Fifteen Winding Programs: Offers a Turns-Per-Day (TPD) range from 650 to 1950 to accommodate various watch models.
- Soft Polyurethane Watch Pillows: Designed to fit most watch sizes, including men's and women's watches, with a maximum watch case diameter of 2.4 inches (60 mm).
- Integrated Storage Drawer: Includes space for 2 additional watches, 6 slots for rings, cufflinks, and earrings, and a multi-purpose compartment for jewelry.
- LED Interior Backlight: Illuminates your watches, controllable via remote.
- Motor-Stop Option: Rotors automatically stop when the door is opened to prevent mechanism damage during watch placement or removal.
- LCD Display with Touch Control: Provides clear information and easy navigation for settings.
- Remote Control: For convenient adjustment of settings and backlight (requires 2 AAA batteries, not included).
Setup
- Unpacking: Carefully remove the watch winder from its packaging. Retain all packaging materials for future transport or storage.
- Placement: Place the winder on a stable, flat surface away from direct sunlight, extreme temperatures, and strong magnetic fields.
- Power Connection: Connect the provided AC power adapter to the winder's power input port and then plug it into a standard electrical outlet. The LCD display should illuminate.
- Inserting Watches:
- Open the winder door. The Motor-Stop option will halt the rotors if they are active.
- Gently compress a watch pillow and fit your automatic watch onto it. Ensure the watch is secure but not overly tight.
- Insert the watch and pillow assembly into one of the winder's rotor slots.
- Close the winder door.
- Remote Control Batteries: Insert 2 AAA batteries (not included) into the remote control.
Image: The Leader WATCH WINDERS S2306 with six watches in place and the storage drawer open, showing jewelry compartments.
Image: Illustration showing how watch pillows adapt to different strap sizes and the maximum watch diameter of 2.3 inches (60 mm) for compatibility.
Operating Instructions
LCD Display and Touch Control Panel
The front LCD display provides real-time information about the winder's status, including the selected winding program (TPD) for each rotor. The touch control panel below the display allows for direct interaction and setting adjustments.
Remote Control Functions
The included remote control offers convenient access to various functions:
- Power Button: Turns the winder on or off.
- Backlight Button: Toggles the LED interior backlight on or off.
- TPD Selection Buttons: Allows you to cycle through the 15 available Turns-Per-Day (TPD) programs for each rotor. Refer to your watch's manual for the recommended TPD and winding direction.
- Direction Control: Adjusts the winding direction (clockwise, counter-clockwise, or bi-directional).
Image: The remote control for the watch winder, showing buttons for power, backlight, and TPD settings, alongside a close-up of the LCD display.
Winding Programs and TPD Settings
The winder offers 15 distinct winding programs, providing a TPD range from 650 to 1950. It is crucial to select the correct TPD and winding direction for your specific watch model. Incorrect settings may not adequately wind your watch or could potentially overwind it, though most modern automatic watches have overwinding protection. Consult your watch's manufacturer manual or contact their customer service for the recommended settings.
Motor-Stop Function
The Motor-Stop function is a safety feature. When the winder door is opened, all active rotors will automatically cease movement. This prevents accidental damage to the winder mechanism or your watches while you are placing or removing them. The rotors will resume operation once the door is closed and the winder is powered on.
Image: Diagram illustrating the Motor-Stop option, where rotors halt when the door is opened, and a view of the integrated storage drawer for watches and jewelry.
LED Interior Backlight
The built-in LED backlight enhances the display of your watches, especially in low-light conditions. It can be easily switched on or off using the remote control.
Image: The watch winder with its interior LED backlight activated, showcasing the watches within.
Maintenance
- Cleaning: Wipe the exterior of the winder with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Watch Pillows: The polyurethane watch pillows can be gently wiped clean if necessary. Ensure they are completely dry before reinserting watches.
- Dust Protection: Keep the winder door closed when not accessing watches to minimize dust accumulation inside.
- Power Adapter: Only use the original AC power adapter provided with the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Winder is not operating. | No power supply. Winder is switched off. Door is open (Motor-Stop activated). | Ensure the AC adapter is securely plugged into the winder and a live power outlet. Press the power button on the remote or touch panel. Close the winder door. |
| Watch is not winding. | Incorrect TPD or winding direction. Watch is not a self-winding automatic. Watch is not properly seated on the pillow. | Consult your watch's manual for correct TPD and direction settings and adjust the winder accordingly. This winder is designed for automatic watches only. Ensure the watch is securely placed on the pillow and the pillow is correctly inserted into the rotor. |
| Remote control is not working. | Dead or incorrectly inserted batteries. Obstruction between remote and winder. | Replace the 2 AAA batteries, ensuring correct polarity. Ensure a clear line of sight between the remote and the winder's sensor. |
Specifications
- Model: S2306
- Dimensions (W x L x H): 7.5" x 13.8" x 13" (19 cm x 35 cm x 33 cm)
- Weight: 14.3 lbs (6.5 kg)
- Material: Plastic exterior, Polyurethane interior pillows
- Finish: High-gloss piano lacquer
- Turns-Per-Day (TPD) Range: 650 to 1950 TPD
- Maximum Watch Diameter: 2.4 inches (60 mm)
- Power Source: AC power adapter (included)
- Control: LCD display with touch control, Remote control
- Storage: 6 winder slots, 2 static watch slots, 6 jewelry slots (rings, cufflinks, earrings), multi-purpose compartment.
Image: Diagram showing the product dimensions: 7.5" (19 cm) depth, 13.8" (35 cm) width, and 13" (33 cm) height.
Warranty and Support
This Leader WATCH WINDERS S2306 product comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims, technical assistance, or any questions regarding your watch winder, please contact Leader WATCH WINDERS customer support through the retailer where the product was purchased or visit the official Leader WATCH WINDERS website for contact information.