1. Important Safety Information
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or personal injury. Keep this manual for future reference.
- Electrical Safety: Ensure the power supply matches the voltage requirements (110 Volts). All electrical wiring must be properly grounded and installed by a qualified electrician in accordance with all applicable codes and standards. Do not modify the power cord or plug.
- Installation Safety: This range hood is designed for wall mounting. Ensure the wall structure is strong enough to support the weight of the unit (approximately 27 pounds). Use appropriate mounting hardware. Maintain proper clearance from cooking surfaces as specified in local building codes.
- Operation Safety: Never leave cooking unattended. Grease fires can occur. Clean grease filters regularly to prevent grease buildup. Do not operate the range hood without filters in place.
- Maintenance Safety: Disconnect power before cleaning or performing any maintenance. Use only recommended cleaning agents.
- Ventilation: Ensure proper ventilation for the room when the range hood is in use, especially if other fuel-burning appliances are present.
2. Product Overview
The Winflo 36 In. Convertible Stainless Steel Wall Mount Range Hood is designed to efficiently remove smoke, steam, grease, and cooking odors from your kitchen. It features a powerful motor, energy-saving LED lights, and easy-to-use push button controls. This model includes 2 charcoal filters for non-ducted (recirculating) installation, but can also be configured for ducted (vented outside) operation.
Key Features:
- Powerful suction operation at 284 CFM (Cubic Feet Per Minute) at high speed setting.
- 3-Speed fan levels for optimal suction control.
- Easy-to-operate push button control for power, fan speed, and light.
- Easy removable, dishwasher-safe aluminum mesh filters.
- 2 Bright, energy-saving soft white LED lights to illuminate your cooking area.
- Quiet operation with noise level less than 65dB at high speed.
- Adjustable and telescoping chimney fits 7.5 Ft. - 8.5 Ft. ceilings.
- Convertible design: can be ducted (vented out) or non-ducted (recirculating with charcoal filters).
Product Components:
- Range Hood Main Body (Stainless Steel)
- Telescoping Chimney Sections
- Aluminum Mesh Filters (2 included)
- Charcoal Filters (2 included, model WRHF005S2)
- LED Lights (pre-installed)
- Push Button Control Panel
- Installation and Mounting Hardware
- Flexible Duct Work and Damper (for ducted installation)
- Power Plug
Figure 2.1: Front view of the Winflo 36-inch range hood, highlighting the main unit and included charcoal filters.
Figure 2.2: Detailed frontal view of the range hood, displaying the push button controls and the two mesh filter grilles.
Figure 2.3: Angled side view of the range hood, illustrating its sleek profile and the chimney design.
Figure 2.4: The Winflo range hood integrated into a kitchen setting, demonstrating its appearance when installed.
3. Setup and Installation
Proper installation is crucial for the performance and safety of your range hood. It is recommended that installation be performed by a qualified professional.
3.1 Pre-Installation Checklist:
- Verify all components are present and undamaged.
- Ensure the installation area meets local building codes and electrical requirements.
- Confirm wall structure can support the hood's weight.
- Determine ventilation type: ducted (vented outside) or non-ducted (recirculating).
3.2 Mounting the Range Hood:
- Measure and Mark: Use the provided mounting template (if applicable) or measure carefully to mark the drilling points on the wall. Refer to the dimensions diagram for precise measurements.
- Drill Holes: Drill holes for mounting brackets and electrical wiring according to the marked points.
- Install Mounting Brackets: Securely attach the mounting brackets to the wall using appropriate fasteners.
- Hang the Hood: Carefully lift and hang the main hood body onto the installed mounting brackets. Ensure it is level and secure.
3.3 Ventilation Options:
This range hood supports both ducted and non-ducted installations.
- Ducted Installation:
Connect the flexible duct work (included) from the top vent location of the hood to an external vent opening (through ceiling or wall). Ensure the damper is properly installed to prevent backdraft.
- Non-Ducted (Recirculating) Installation:
Install the two included charcoal filters (WRHF005S2) onto the motor housing. These filters will purify the air before recirculating it back into the kitchen. No external ducting is required for this setup.
3.4 Electrical Connection:
Connect the range hood's power plug to a grounded 110 Volt electrical outlet. Ensure the circuit is dedicated and properly rated for the hood's wattage (149.3 watts).
3.5 Chimney Installation:
Install the telescoping chimney sections over the main hood body and secure them to the wall or ceiling as per the instructions. The chimney is adjustable to fit ceiling heights between 7.5 Ft. and 8.5 Ft.
Figure 3.1: Dimensional drawing of the range hood, essential for accurate installation planning.
4. Operating Instructions
The Winflo range hood features a user-friendly push button control panel located on the front of the unit.
Control Panel Functions:
- Power Button (⏻): Press to turn the range hood ON or OFF.
- Fan Speed Buttons (★, ★★, ★★★):
- Press the first button for Low speed (ideal for simmering).
- Press the second button for Medium speed (for general cooking).
- Press the third button for High speed (for heavy cooking or strong odors).
- Light Button (💡): Press to turn the LED lights ON or OFF. The lights provide illumination for your cooking area.
For optimal performance, turn on the range hood a few minutes before you start cooking and leave it on for a few minutes after you finish to ensure all smoke and odors are cleared.
5. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Winflo range hood. Always disconnect power before performing any maintenance.
5.1 Cleaning the Exterior:
- Wipe the stainless steel surfaces with a soft cloth and a non-abrasive stainless steel cleaner.
- Do not use abrasive pads, harsh detergents, or cleaners containing bleach, as these can damage the finish.
- Wipe in the direction of the grain for best results.
5.2 Cleaning/Replacing Mesh Filters:
- The aluminum mesh filters should be cleaned regularly (e.g., monthly, depending on cooking frequency) to maintain optimal airflow and prevent grease buildup.
- To remove: Locate the release latches on each filter, push or pull to disengage, and carefully lower the filter.
- Cleaning: The filters are dishwasher safe. Alternatively, wash them by hand in hot water with a mild detergent. Rinse thoroughly and allow to dry completely before re-installing.
- To re-install: Align the filter with the slots and push until the release latches click into place.
5.3 Replacing Charcoal Filters (for Non-Ducted Use):
- Charcoal filters (model WRHF005S2) are used for non-ducted installations and cannot be cleaned. They must be replaced periodically, typically every 3-6 months, depending on usage.
- To replace: Remove the mesh filters first. The charcoal filters are usually twisted or clipped onto the motor housing. Remove the old filters and install new ones, ensuring they are securely fastened.
- Re-install the mesh filters after replacing the charcoal filters.
5.4 LED Lights:
The range hood is equipped with long-lasting, energy-saving LED lights. In most cases, these lights will not require replacement during the product's lifespan. If a light issue occurs, refer to the troubleshooting section or contact customer support.
6. Troubleshooting
Before contacting customer support, please review the following common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Range hood does not turn on. | No power supply. Power cord not plugged in. Circuit breaker tripped. | Check if the unit is plugged into a live outlet. Check the circuit breaker and reset if necessary. Ensure the power button is pressed. |
| Fan is operating, but suction is weak. | Grease filters are clogged. Ducting is obstructed or too long/restrictive (ducted models). Charcoal filters are saturated (non-ducted models). Incorrect fan speed selected. | Clean or replace mesh filters. Check ductwork for obstructions or kinks. Replace charcoal filters (WRHF005S2). Select a higher fan speed. |
| Lights are not working. | Light button not pressed. LED lights faulty. | Press the light button. If lights still do not work, contact customer support for assistance. |
| Excessive noise during operation. | Loose components. Obstruction in fan blades. Improper installation. | Check for loose screws or parts and tighten them. Disconnect power and check for any foreign objects in the fan area. Ensure the hood is securely mounted and level. |
If the problem persists after attempting these solutions, please contact Winflo customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Winflo |
| Model Number | W103C36F |
| UPC | 819037022721 |
| Material | Stainless Steel, Aluminum, Charcoal |
| Mounting Type | Wall Mount |
| Controls Type | Push Button |
| Voltage | 110 Volts |
| Number of Speeds | 3 |
| Light Source Type | LED |
| Wattage | 149.3 watts |
| Filter Type | Mesh (Aluminum), Charcoal |
| Ventilation Type | Ducted, Ductless (Convertible) |
| Airflow Displacement | 284 CFM (Cubic Feet Per Minute) |
| Noise Level | Less than 65dB at high speed (5 Sones) |
| Item Weight | 27 pounds |
| Package Dimensions | 38 x 22 x 16 inches |
| Chimney Adjustment | Fits 7.5 Ft. - 8.5 Ft. ceilings |
| Included Components | LED Lights, Mesh Filters, Charcoal Filters, Mounting Hardware, Flexible Duct Work, Damper, Plug |
8. Warranty and Customer Support
8.1 Manufacturer Warranty:
Winflo provides a 3-year limited warranty on parts for this range hood. Labor is not included under this warranty. Please retain your proof of purchase for warranty claims.
8.2 Customer Support:
For technical assistance, warranty claims, or to purchase replacement parts (such as charcoal filters WRHF005S2 or chimney extension WRHCE03), please contact Winflo customer support. Refer to the product packaging or the Winflo official website for the most current contact information.
When contacting support, please have your model number (W103C36F) and purchase date ready.