Breville Barista Touch Espresso Machine User Manual

Introduction

This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your Breville Barista Touch Espresso Machine. Please read all instructions thoroughly before first use and retain this manual for future reference.

The Breville Barista Touch is designed to deliver third wave specialty coffee at home, integrating a grinder to transition from whole beans to espresso in under one minute. It features a touchscreen interface for simplified operation and customization.

Image: The Breville Barista Touch Espresso Machine, Black Truffle model, shown from the front with the bean hopper filled and the touchscreen displaying drink options.

Key Features

• Integrated Conical Burr Grinder: Delivers precise, dose-controlled grinding for optimal flavor.
• ThermoJet Heating System: Achieves optimal extraction temperature in 3 seconds for rapid heat-up.
• Digital Temperature Control (PID): Ensures water is delivered at the precise temperature for consistent espresso extraction.
• Automatic Microfoam Milk Texturing: Auto steam wand allows adjustment of milk temperature and texture for barista-quality microfoam.
• Intuitive Touchscreen Display: Simplifies the coffee-making process with Grind, Brew, and Milk steps. Allows customization and saving of up to 8 personalized coffee settings.
• Low Pressure Pre-Infusion: Gradually increases pressure at the start of extraction for balanced flavor.

Image: Diagram illustrating the '4 Keys Formula' for espresso: Precision Puck (18-22g), Extraction Pressure (9 BAR), Extraction Temperature (93°C/200°F), and Microfoam Bubbles (1,000,000/ml).

Setup

1. Unpacking and Placement

• Remove all packaging materials and promotional labels from your espresso machine.
• Place the machine on a flat, stable, heat-resistant surface. Ensure there is adequate space around the machine for ventilation and access.

2. Water Tank and Filter Installation

• Remove the water tank from the back of the machine.
• Install the ClaroSwiss Water Filter into the filter holder inside the water tank. Submerge the filter in cold water for 5 minutes before installation.
• Fill the water tank with cold, filtered water up to the MAX line.
• Reinsert the water tank firmly into the machine.

3. Bean Hopper Installation

• Place the bean hopper onto the top of the machine, aligning it with the grinder collar.
• Rotate the hopper clockwise until it locks into position.
• Fill the hopper with fresh, whole coffee beans.

4. Initial Start-up and Priming

• Plug the power cord into a grounded outlet.
• Press the POWER button. The machine will guide you through the initial setup process on the touchscreen, including language selection and water hardness testing.
• Follow the on-screen prompts to prime the machine, which involves flushing water through the system.

Image: A collection of included accessories for the Breville Barista Touch, including a portafilter, milk jug, tamper, water filter, dosing funnel, single and dual wall filter baskets, cleaning accessories, descaler, cleaning tablets, water testing strips, and the Razor precision dose trimming tool.

Operating Instructions

1. Using the Touchscreen Interface

• The touchscreen allows you to select pre-programmed drinks like Espresso, Americano, Latte, Flat White, and Cappuccino.
• Swipe left or right to browse drink options. Tap to select.
• You can customize drink settings (coffee strength, milk texture, temperature) and save them as personalized coffees.

Image: A hand interacting with the touchscreen display of the Breville Barista Touch, showing the 'Swipe and select' prompt and various drink options like Espresso, Americano, Latte, Flat White, and Cappuccino.

2. Grinding Coffee Beans

• Insert the portafilter into the grinding cradle.
• The integrated conical burr grinder will automatically dispense the correct amount of ground coffee for a single or double shot.
• Adjust the grind size using the grind size dial on the side of the machine. Finer grinds are typically for espresso.

Image: A close-up of the Breville Barista Touch showing the portafilter in the grinding cradle, filled with freshly ground coffee. The text indicates 'Auto grind & dose with Baratza European Precision Burrs and 30 grind settings'.

3. Tamping the Grounds

• After grinding, use the included tamper to press the coffee grounds firmly and evenly into the portafilter.
• Use the Razor Precision Dose Trimming Tool to level the dose for consistent extraction.

Image: A hand using a tamper to press coffee grounds into a 54mm portafilter, demonstrating the tamping process for espresso preparation.

4. Brewing Espresso

• Insert the portafilter into the group head and twist firmly to lock it in place.
• Place your cup(s) under the portafilter spouts.
• Select your desired espresso shot on the touchscreen. The machine will initiate low-pressure pre-infusion followed by high-pressure extraction.

Image: A close-up of espresso being extracted from the portafilter into two clear glass cups, showcasing the rich crema.

5. Texturing Milk

• Fill the stainless steel milk jug with cold milk.
• Position the steam wand into the milk jug, ensuring the tip is just below the surface.
• Select your desired milk temperature and texture on the touchscreen. The auto steam wand will automatically texture the milk.
• After texturing, wipe the steam wand immediately with a damp cloth and purge briefly to clear any milk residue.

Image: A close-up of the Breville Barista Touch's auto steam wand submerged in a stainless steel milk jug, texturing milk to create microfoam.

Maintenance

1. Daily Cleaning

• Drip Tray: Empty and clean the drip tray daily. It has a 'EMPTY ME' indicator when full.
• Portafilter and Filter Baskets: Rinse the portafilter and filter baskets under hot water after each use.
• Steam Wand: Always wipe the steam wand immediately after use with a damp cloth and purge briefly to prevent milk blockages.
• Group Head: Use the cleaning brush to remove any ground coffee from the group head seal and shower screen.

2. Cleaning Cycle

• The machine will prompt you when a cleaning cycle is required. Follow the on-screen instructions.
• Use the provided cleaning tablets and the blind filter basket for this process.

3. Descaling

• The machine will indicate when descaling is necessary. This process removes mineral buildup from internal components.
• Use the Breville descaling powder or solution as directed by the machine's prompts.

4. Water Filter Replacement

• Replace the ClaroSwiss Water Filter every 3 months or as prompted by the machine to maintain water quality and prevent scale buildup.

Troubleshooting

Specifications

Image: The Breville Barista Touch Espresso Machine on a countertop with overlaid measurements indicating its dimensions: 16 inches high, 12.5 inches wide, and 12.7 inches deep.

Warranty and Support

Warranty Information

The Breville Barista Touch Espresso Machine comes with a 2-Year Limited Warranty. Please refer to the warranty documentation included with your product for full terms and conditions. Keep your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Breville Customer Support. Contact details can typically be found in the warranty booklet or on the official Breville website.

Product Video