ELEKICO 8FT-10pcs
ELEKICO 8ft LED Shop Light Instruction Manual
Model: 8FT-10pcs | Brand: ELEKICO
Introduction
Thank you for choosing the ELEKICO 8ft LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. These super bright, energy-efficient LED lights are designed for various indoor applications such as garages, warehouses, factories, barns, and basements, providing 15000 lumens of 5000K daylight illumination.
Image: Key features of the ELEKICO 8ft LED Shop Light, highlighting its 100W power, 5000K daylight color, 270-degree beam angle, and 768 LED chips for superior brightness.
Safety Instructions
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Always disconnect power before installing or servicing the fixture.
- Ensure the power supply is within the specified voltage range (AC100-277V).
- Do not install in wet locations or areas exposed to direct water. This product is for indoor use only.
- Keep the fixture away from radio, remote control doors, and similar devices to prevent electromagnetic interference (EMI).
- Do not attempt to modify or disassemble the fixture. Refer all servicing to qualified personnel.
- Not suitable for ceilings 20ft or higher.
What's in the Box
Your ELEKICO 8ft LED Shop Light package includes the following components:
- 10 x 8ft LED Shop Lights
- 5 x 59-inch Power Cords with ON/OFF switch
- 10 x Power Cords (for direct wiring or linking)
- 10 x Installation Accessories (snap joints, screws, wall anchors)
- 8 x 23.6-inch Connector Cables (for linking multiple lights)
Image: Overview of the included components for the 10-pack of 8ft LED Shop Lights.
Setup and Installation
The ELEKICO 8ft LED Shop Lights offer easy installation with multiple connection options.
Installation Methods:
- Surface Mount: Use the provided snap joints, screws, and wall anchors to securely attach the lights directly to the ceiling or wall surface. Simply hang the fixture using the snap joints.
- Suspended Mount: (Optional, hanging chains not included) Attach the snap joints to the fixture and use appropriate hanging chains (not supplied) to suspend the lights from the ceiling.
Connection Options:
These lights feature an extendable design, allowing you to connect multiple units for continuous lighting.
- Plug and Play: Use the 59-inch power cords with ON/OFF switches for individual light operation.
- Seamless Series Connection: Directly connect lights end-to-end using the integrated connectors for a continuous run.
- Connector Cables: Use the 23.6-inch connector cables to link lights with a small gap between them.
Important: Do not connect more than 3 of these 8ft lights in series to avoid overloading the circuit and ensure optimal performance.
Image: Illustration of the two primary installation methods: plug-and-play with a switch cord and direct wiring.
Image: Visual guide to connecting multiple lights in series, either seamlessly or with connector cables.
Operating Instructions
Once installed and connected to a power source, the ELEKICO 8ft LED Shop Lights are ready for immediate use.
- For lights connected via a power cord with an ON/OFF switch, simply toggle the switch to turn the lights on or off.
- For lights hardwired or connected to a wall switch, operate them using the connected switch.
- The lights provide instant-on illumination with no flickering.
Maintenance
The ELEKICO 8ft LED Shop Lights require minimal maintenance.
- Ensure power is disconnected before cleaning.
- Wipe the fixture with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Regularly check connections for security, especially if the lights are in an area with vibrations.
Troubleshooting
If you encounter issues with your ELEKICO 8ft LED Shop Lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power supply, loose connection, faulty switch. | Check power outlet, ensure all connections are secure, test the switch. |
| Lights flicker or dim. | Too many lights connected in series, unstable power supply, EMI. | Ensure no more than 3 lights are connected in series. Check power source stability. Relocate away from sources of EMI (radio, remote control devices). |
| Lights are not bright enough. | Incorrect installation height, insufficient number of fixtures for the area. | Ensure installation height is appropriate (not for 20ft+ ceilings). Consider adding more fixtures for larger areas. |
Specifications
| Feature | Detail |
|---|---|
| Brand | ELEKICO |
| Model Number | 8FT-10pcs |
| Power Source | Corded Electric |
| Voltage | AC100-277V |
| Wattage | 100 Watts |
| Brightness | 15000 Lumens |
| Color Temperature | 5000 Kelvin (Daylight) |
| Light Source Type | LED (768 LED Chips) |
| Beam Angle | 270 Degrees (V-shape) |
| Material | Aluminum, Plastic |
| Product Dimensions | 93.9"L x 1.2"W x 1.5"H |
| Indoor/Outdoor Usage | Indoor |
| Installation Type | Surface Mount |
| Special Features | Easy installation, Super Bright, Linkable |
Warranty and Support
ELEKICO provides a limited warranty for this product. For specific warranty details and claims, please refer to the documentation included with your purchase or contact ELEKICO customer service.
For technical support, troubleshooting assistance, or any questions regarding your ELEKICO 8ft LED Shop Lights, please contact our customer service team. We are committed to providing professional after-sales support and 7/24 hours customer service.
Image: ELEKICO's commitment to professional after-sales support and 24/7 customer service.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.