Taylor Swoden Taylor Swoden-01

Taylor Swoden Glass Electric Kettle

Model: Taylor Swoden-01

1. Introduction

Thank you for choosing the Taylor Swoden Glass Electric Kettle. This appliance is designed for efficient and safe water boiling, featuring a 1.7-liter capacity, fast boiling capabilities, and safety features like automatic shutoff and boil-dry protection. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

Taylor Swoden Glass Electric Kettle with water boiling and blue LED light

Image 1.1: The Taylor Swoden Glass Electric Kettle, showcasing its clear glass body, stainless steel accents, and illuminated blue LED during operation.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury.

  • Read all instructions before use.
  • Do not touch hot surfaces. Use handles or knobs.
  • To protect against electrical hazards, do not immerse the cord, power base, or kettle in water or other liquids.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
  • Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
  • The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
  • Do not use outdoors.
  • Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
  • Do not place on or near a hot gas or electric burner, or in a heated oven.
  • Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to "off", then remove the plug from the wall outlet.
  • Do not use the appliance for other than intended use.
  • The kettle features an Automatic Shut-Off and Boil Dry Protection for safety. If the kettle boils dry, it will automatically turn off.
  • Ensure the lid is securely closed during operation to prevent scalding from steam.
  • The handle is designed to be Heat-Resistant for safe handling.

3. Product Components

Familiarize yourself with the parts of your Taylor Swoden Electric Kettle:

  1. Spout with Removable Filter
  2. Lid
  3. Glass Kettle Body (Borosilicate Glass)
  4. Water Level Indicator (MIN/MAX markings)
  5. Handle (Heat-Resistant with On/Off Switch)
  6. Power Base (360° Rotatable with Cord Storage)
  7. Concealed Heating Element (inside the base of the kettle)
  8. Blue LED Indicator Light (illuminates when boiling)
Diagram showing Taylor Swoden kettle features: Blue LED, Anti-scald Handle, On/Off Button, Reel Storage, Large Opening, Removable Filter

Image 3.1: Key features and components of the Taylor Swoden Electric Kettle, including the blue LED, anti-scald handle, on/off button, cord reel storage, large opening, and removable filter.

Close-up of the Taylor Swoden kettle's wide spout and open lid

Image 3.2: The wide spout and opening of the kettle, designed for easy filling and cleaning.

4. Setup and First Use

Before using your kettle for the first time, or if it has been stored for a long period, it is recommended to clean it.

  1. Initial Cleaning: Fill the kettle with clean water to the MAX level. Boil the water, then discard it. Repeat this process 2-3 times to remove any manufacturing residues.
  2. Placement: Place the power base on a flat, stable, heat-resistant surface. Ensure the power cord is not dangling where it can be pulled or tripped over.
  3. Cord Management: The power base features integrated cord storage. Adjust the cord length as needed and store excess cord underneath the base to keep your countertop tidy.
A hand pouring water into the Taylor Swoden electric kettle

Image 4.1: Illustrates filling the kettle with water.

5. Operating Instructions

  1. Fill the Kettle: Open the lid and fill the kettle with the desired amount of fresh water. Do not fill below the MIN (0.6L) mark or above the MAX (1.7L) mark. Overfilling may cause boiling water to spill out. Close the lid securely.
  2. Place on Power Base: Place the kettle firmly onto the 360° rotatable power base. Ensure it is properly seated.
  3. Connect to Power: Plug the power cord into a standard electrical outlet.
  4. Start Boiling: Press the On/Off switch located on the handle downwards. The blue LED indicator light will illuminate, indicating that the kettle is heating.
  5. Automatic Shutoff: Once the water reaches a rolling boil, the kettle will automatically shut off, and the blue LED light will extinguish.
  6. Pouring: Carefully lift the cordless kettle from its base and pour the hot water. The heat-resistant handle ensures safe pouring.
  7. Re-boiling: If you need to re-boil water, wait a few seconds for the internal thermostat to reset, then press the On/Off switch again.
Illustration of the Taylor Swoden kettle boiling water, showing heat circulation and icons for Concealed Heating, Energy Efficient, and Auto Shutoff.

Image 5.1: The kettle in operation, highlighting its rapid boiling time (approximately 8 minutes for 1.7 liters) and key features like concealed heating, energy efficiency, and auto shutoff.

Close-up of the On/Off switch on the kettle handle

Image 5.2: Detail of the On/Off switch located on the kettle's handle.

6. Maintenance and Cleaning

Regular cleaning helps maintain the performance and longevity of your kettle. Always unplug the kettle and allow it to cool completely before cleaning.

  • Exterior Cleaning: Wipe the exterior of the kettle and the power base with a soft, damp cloth. Do not use abrasive cleaners or scouring pads, as they may scratch the surface.
  • Interior Cleaning (Descaling): Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas. To descale:
    1. Fill the kettle with 1 part white vinegar and 2 parts water.
    2. Bring the mixture to a boil and let it stand for at least 30 minutes, or longer for heavy buildup.
    3. Empty the kettle and rinse thoroughly with fresh water several times.
    4. Alternatively, use a commercial descaling solution designed for kettles, following the product's instructions.
  • Removable Filter: The filter located in the spout can be removed for cleaning. Rinse it under running water and gently brush away any deposits. Ensure it is securely re-inserted before use.
A hand cleaning the interior of the Taylor Swoden electric kettle with a cloth

Image 6.1: Demonstrates cleaning the interior of the kettle.

7. Troubleshooting

ProblemPossible CauseSolution
Kettle does not turn on.
  • Not plugged in.
  • Kettle not properly seated on base.
  • On/Off switch not pressed.
  • Boil-dry protection activated.
  • Ensure the power cord is securely plugged into an outlet.
  • Place the kettle firmly on the power base.
  • Press the On/Off switch downwards.
  • If boil-dry protection activated, remove kettle from base, let it cool for 10-15 minutes, then refill and restart.
Water takes too long to boil or does not reach full boil.
  • Limescale buildup.
  • Lid not closed properly.
  • Descale the kettle as per the "Maintenance and Cleaning" section.
  • Ensure the lid is securely closed.
Water has an unusual taste or smell.
  • New appliance smell.
  • Limescale buildup.
  • Perform initial cleaning steps (boil and discard water several times).
  • Descale the kettle.
Water drips from the kettle after boiling.
  • Condensation on the lid.
  • Overfilling.
  • Be careful when opening the lid after boiling, as condensed water may drip.
  • Do not fill above the MAX line.

8. Specifications

FeatureDetail
BrandTaylor Swoden
Model NameTaylor Swoden-01
Capacity1.7 Liters (1.8 Quarts)
Power1100 Watts
MaterialBorosilicate Glass, Stainless Steel, BPA-Free components
Special FeaturesAutomatic Shut-Off, Boil Dry Protection, Cordless, Heat Resistant Handle, Overheat Protection, Rapid Boil, Removable Filter, 360° Rotatable Base, Blue LED Indicator
Product Dimensions8.5"L x 8.5"W x 9.6"H
Item Weight2.92 pounds
Country of OriginChina
Taylor Swoden kettle demonstrating its 1.7L capacity with six glasses of water

Image 8.1: Visual representation of the kettle's 1.7L capacity, equivalent to approximately six 260ml cups.

Taylor Swoden kettle with dimensions labeled: 9.6 inches height, 8.5 inches width

Image 8.2: Dimensions of the Taylor Swoden Electric Kettle.

9. Warranty and Customer Support

Taylor Swoden products are manufactured with quality and reliability in mind. For any questions, concerns, or support needs regarding your electric kettle, please contact the TaylorTech Inc. service team.

Please refer to your purchase documentation or the official Taylor Swoden website for specific warranty details and contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.