KERNOWO KN-LED Garage light

KERNOWO KN-LED Garage Light User Manual

Model: KN-LED Garage light | Brand: KERNOWO

1. Safety Instructions

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Electrical Safety: Always ensure the power supply is turned OFF at the circuit breaker before installing, removing, or performing any maintenance on the light fixture.
  • Indoor Use Only: This product is designed for indoor use in dry locations. It is not water resistant and should not be exposed to moisture or outdoor elements.
  • Voltage Compatibility: Ensure your power supply matches the light's voltage requirement (110 Volts).
  • Heat Warning: The LED panels can become warm after prolonged use. DO NOT TOUCH THE PANELS IMMEDIATELY AFTER LONG-TERM OPERATION to avoid burns.
  • Installation Height: While the light can be effective at various heights, ensure it is installed securely and at a height that prevents accidental contact, especially in high-traffic areas.
  • Professional Installation: If you are unsure about electrical wiring or installation procedures, consult a qualified electrician.

2. Product Overview

The KERNOWO KN-LED Garage Light is a high-performance lighting solution designed for large indoor spaces such as garages, workshops, warehouses, and basements. It features a unique deformable design for adjustable illumination.

Key Features:

  • High Brightness: Equipped with 576 LED chips, providing 18500 lumens of 6000K daylight illumination.
  • Energy Efficient: Consumes 140W, offering significant energy savings compared to traditional lighting.
  • Deformable Design: Three adjustable aluminum LED heads can be folded up to 120°, allowing for a maximum coverage angle of 360°.
  • Durable Construction: Made with premium aluminum alloy for excellent heat dissipation and extended lifespan (over 50,000 hours).
  • Easy Installation: Screws directly into standard E26/E27 light receptacles, requiring no special tools or wiring.

Components:

Diagram showing the components of the KERNOWO LED Garage Light, including the E26-E27 base, adjustable roller, center LED panels, high-end LED chips, and durable PC material.

Figure 2.1: KERNOWO LED Garage Light Components

The light consists of a central base with an E26/E27 screw-in connector and three hinged LED panels. Each panel contains numerous LED chips and is designed for optimal light output and heat management.

3. Specifications

FeatureSpecification
BrandKERNOWO
Model NameKN-LED Garage light
Wattage140 Watts
Brightness18500 Lumens
Color Temperature6000K Daylight (Cool White)
Color Rendering Index (CRI)> 80Ra
Voltage110 Volts
Bulb BaseE26/E27
MaterialAluminum, Acrylonitrile Butadiene Styrene (ABS)
LifespanOver 50,000 hours
Product Dimensions10.6"L x 10.6"W x 4.1"H
Indoor/Outdoor UsageIndoor Only
Water Resistance LevelNot Water Resistant

4. Setup and Installation

The KERNOWO KN-LED Garage Light is designed for simple, tool-free installation into existing E26/E27 screw-in light receptacles.

Installation Steps:

  1. Power Off: Before beginning installation, ensure the power to the light fixture is completely turned OFF at the circuit breaker to prevent electric shock.
  2. Prepare Receptacle: Confirm that the existing light receptacle is an E26 or E27 standard screw-in type and is in good working condition.
  3. Screw In: Carefully screw the KERNOWO LED Garage Light into the receptacle clockwise until it is snug. Do not overtighten.
Image showing the KERNOWO LED Garage Light being screwed into a standard E26/E27 light socket, with an arrow indicating the clockwise rotation.

Figure 4.1: Simple Screw-in Installation

  1. Restore Power: Once the light is securely installed, turn the power back ON at the circuit breaker.

5. Operation

Operating the KERNOWO KN-LED Garage Light involves simply turning it on and off, and adjusting the light panels to direct illumination.

Turning On/Off:

The light is controlled by the standard wall switch connected to the light receptacle. Flip the switch to turn the light on or off.

Adjusting Light Panels:

The three LED panels are hinged and can be manually adjusted to direct light where it is most needed. Each panel can be folded up to 120 degrees.

Image demonstrating the deformable design of the KERNOWO LED Garage Light, showing how the three panels can be adjusted up to 120 degrees to direct light.

Figure 5.1: Adjustable Panel Design

Adjust the panels to achieve optimal light distribution for your specific space. This allows for broad, even illumination or more focused lighting in certain areas.

Image illustrating the 360-degree illumination capability of the KERNOWO LED Garage Light, showing light spreading across a garage space.

Figure 5.2: 360-degree Illumination

6. Maintenance

The KERNOWO KN-LED Garage Light requires minimal maintenance due to its durable design and long-lasting LED technology.

Cleaning:

  • Ensure the power is OFF and the light has cooled down before cleaning.
  • Wipe the light fixture with a soft, dry, or slightly damp cloth.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or LED components.

Heat Dissipation:

The light features a hollowed-out panel design for efficient heat dissipation, which is crucial for extending its lifespan.

Image showing the hollow-out design of the LED panels, with arrows indicating airflow for heat dissipation.

Figure 6.1: Heat Dissipation Design

Ensure that the light fixture is not obstructed by insulation or other materials that could impede airflow around the panels.

7. Troubleshooting

If you encounter issues with your KERNOWO KN-LED Garage Light, refer to the following common troubleshooting steps:

  • Light Does Not Turn On:
    • Check if the power switch is in the ON position.
    • Verify that the circuit breaker for the light fixture is not tripped.
    • Ensure the light is securely screwed into the E26/E27 receptacle.
    • Test the receptacle with another working bulb to confirm power supply.
  • Light is Dim or Flickering:
    • Confirm the light is fully screwed into the socket. A loose connection can cause flickering.
    • Ensure the voltage supply is stable and within the specified range (110V).
    • If multiple lights are on the same circuit, ensure the circuit is not overloaded.
  • Panels Do Not Adjust Smoothly:
    • Check for any physical obstructions or debris in the hinge mechanism.
    • Apply gentle, even pressure when adjusting. Do not force the panels.

If these steps do not resolve the issue, please contact KERNOWO customer support for further assistance.

8. Warranty and Support

The KERNOWO KN-LED Garage Light comes with a manufacturer's warranty. Please refer to the warranty information provided at the time of purchase for specific terms and conditions.

Customer Support:

For technical support, warranty claims, or any questions regarding your KERNOWO product, please contact KERNOWO customer service through the retailer where the product was purchased or visit the official KERNOWO website for contact information.

Please have your model number (KN-LED Garage light) and purchase date available when contacting support.

9. Application Examples

The KERNOWO KN-LED Garage Light is suitable for a variety of large indoor spaces requiring bright, adjustable illumination.

Collage of images showing the KERNOWO LED Garage Light installed in various settings: a parking lot, a warehouse, a supermarket, and an office, demonstrating its versatility.

Figure 9.1: Diverse Application Environments

  • Garages
  • Workshops
  • Warehouses
  • Basements
  • Storage Rooms
  • Barns
  • Utility Rooms

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.