1. Introduction
Thank you for choosing the ACME Carlson Accent Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new accent chair. Please read it thoroughly before use and retain it for future reference.
The Carlson Accent Chair is designed to enhance your living space with its contemporary style, luxurious gray velvet fabric, and elegant gold legs. Its comfortable barrel backrest and high-shelter armrests offer a sophisticated seating experience.
Figure 1: Front view of the ACME Carlson Accent Chair, showcasing its gray velvet upholstery and gold-finished legs.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Always assemble the chair on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before using the chair. Periodically check and re-tighten as necessary.
- Do not stand on the chair or use it as a step stool.
- Do not exceed the maximum weight capacity (not specified, assume standard accent chair capacity, e.g., 250 lbs).
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Avoid placing the chair near open flames, heat sources, or in direct sunlight for prolonged periods to prevent material degradation.
3. Setup and Assembly
The ACME Carlson Accent Chair requires minimal assembly. Please follow these steps:
3.1. Included Components
- 1 x Accent Chair Body
- 4 x Gold Legs
- Hardware Pack (screws, washers, Allen wrench)
3.2. Assembly Steps
- Carefully unpack all components and verify against the included components list.
- Place the chair body upside down on a soft, non-abrasive surface (e.g., a blanket or carpet) to protect the fabric.
- Locate the pre-drilled holes on the underside of the chair where the legs attach.
- Attach each gold leg to the corresponding corner using the provided screws and Allen wrench. Ensure the legs are oriented correctly.
- Tighten all screws firmly, but do not overtighten.
- Carefully turn the chair upright. Ensure it is stable before use.
Figure 2: Detail of the gold leg attachment point on the chair, illustrating the secure connection.
Figure 3: Dimensions of the ACME Carlson Accent Chair: 30 inches (width) x 27.5 inches (depth) x 29 inches (height).
4. Operating Instructions
The Carlson Accent Chair is designed for comfortable seating in various indoor environments. To use your chair:
- Place the chair on a level surface to ensure stability.
- Position the chair in your desired living area, bedroom, or office space.
- The chair is intended for single-person use.
- Avoid rocking or excessive force on the chair, as this may compromise its structural integrity.
5. Care and Maintenance
Proper care will extend the life and maintain the appearance of your accent chair:
- Fabric Care (Gray Velvet):
- For general cleaning, gently vacuum the velvet fabric using an upholstery attachment to remove dust and debris.
- For spills, spot clean immediately with a clean, damp cloth. Blot the stain gently; do not rub. Use a mild, pH-neutral upholstery cleaner if necessary, testing on an inconspicuous area first.
- Allow the fabric to air dry completely. Avoid using harsh chemicals or abrasive cleaners.
- Leg Care (Gold Finish):
- Wipe clean the gold-finished legs with a soft, dry cloth.
- Avoid using abrasive cleaners or polishes that could damage the finish.
- General Maintenance:
- Periodically check all connections and tighten any loose screws to ensure stability.
- Keep the chair away from direct sunlight and extreme temperatures to prevent fading or material damage.
Figure 4: Close-up view of the luxurious gray velvet fabric, highlighting its soft texture.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels wobbly or unstable. | Legs are not fully tightened or unevenly assembled. | Ensure all leg screws are securely tightened. Check if the chair is on a level surface. Adjust leg levelers if present (not specified, but common). |
| Fabric appears discolored or stained. | Spills not cleaned promptly or improper cleaning agents used. | Refer to the "Care and Maintenance" section for proper spot cleaning instructions. Avoid harsh chemicals. |
| Squeaking noises during use. | Loose connections or friction between components. | Check and tighten all assembly screws. If noise persists, apply a small amount of silicone lubricant to metal-on-metal contact points (avoiding fabric). |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | ACME |
| Model Name | Carlson Accent Chair |
| ASIN | B0895YN66N |
| Color | Gray Velvet & Gold |
| Material | Wood (Frame), Foam (Seat), Velvet (Upholstery) |
| Dimensions (L x W x H) | 30 x 27.5 x 29 inches |
| Item Weight | 33 Pounds |
| Back Style | Tight Back |
| Special Feature | Arm Rest, Barrel Backrest, Channeled Tufted |
| Assembly Required | Yes |
| Care Instructions | Spot Clean, Wipe Clean |
8. Warranty and Support
ACME Furniture stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ACME Furniture website. For technical support, replacement parts, or any inquiries, please contact ACME Furniture customer service through their official channels.
Please have your model name (Carlson Accent Chair) and ASIN (B0895YN66N) ready when contacting support.
