1. Introduction
Thank you for choosing the tectake Alina Sun Loungers. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your new sun loungers. Please read this manual thoroughly before use and keep it for future reference.
These sun loungers are designed to provide a comfortable and relaxing experience in your garden or patio. They feature a modern design, a durable aluminum frame, and a weather-resistant material, ensuring stability and ease of maintenance.
2. Safety Instructions
- Always ensure the loungers are placed on a stable, level surface to prevent tipping.
- Do not exceed the maximum weight capacity of 120 kg (264 lbs).
- Keep hands and fingers clear of moving parts when adjusting the backrest.
- Do not allow children to play unsupervised on or around the loungers.
- Inspect the loungers regularly for any signs of wear or damage. Do not use if damaged.
- Avoid prolonged exposure to extreme weather conditions to extend product lifespan.
3. Package Contents
Please check the package contents carefully upon receipt. If any parts are missing or damaged, contact customer support immediately.
- 2 x Sun Loungers
- Assembly Material (Hardware)
- Construction Manual (This document)
Figure 3.1: Two tectake Alina sun loungers. Each lounger features a black mesh fabric, a sturdy black aluminum frame, and a removable head pillow. The loungers are shown in a slightly reclined position, highlighting their sleek design suitable for outdoor relaxation.
4. Setup and Assembly
The tectake Alina Sun Loungers require minimal assembly. Follow these steps to set up your loungers:
- Unpack all components from the box and lay them out on a clean, flat surface.
- Identify the main frame sections and the support legs.
- Attach the support legs to the main frame using the provided hardware. Ensure all screws are tightened securely, but do not overtighten.
- Verify that the lounger is stable and all connections are firm before use.
- Place the soft head pillow onto the designated area at the top of the backrest.
5. Operating Instructions
5.1 Adjusting the Backrest
The backrest of the Alina sun lounger is adjustable to 5 different positions, allowing you to find your preferred angle for relaxation.
- To adjust the backrest, gently lift the backrest slightly.
- Locate the adjustment mechanism at the rear of the backrest.
- Lift the backrest to disengage it from its current notch.
- Move the backrest to the desired angle and lower it until it securely locks into one of the 5 available notches.
- Ensure the backrest is firmly locked in place before leaning back.
Figure 5.1: Illustration of the backrest adjustment. The image shows the side profile of the sun lounger with a series of notches on the frame, indicating the five adjustable positions for the backrest. Arrows suggest the upward and downward movement for selecting a desired recline angle.
Figure 5.2: Detail of the head pillow. This close-up shows the soft, black head pillow, which is designed for comfort and can be easily attached or removed from the top of the lounger's backrest.
6. Maintenance
To ensure the longevity and appearance of your tectake Alina Sun Loungers, follow these maintenance guidelines:
- Cleaning: Wipe down the frame and fabric with a damp cloth and mild soap. Rinse thoroughly with clean water and allow to air dry completely. Avoid harsh chemicals or abrasive cleaners.
- Storage: While the loungers are weather-resistant, storing them indoors or covering them during prolonged periods of non-use or harsh weather (heavy rain, snow, strong sun) will extend their lifespan.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Pillow Care: The head pillow can be spot cleaned. If removable, follow care instructions on the pillow's label.
Figure 6.1: Rear view of the sun lounger. This image provides a view of the back of the lounger, showcasing the robust aluminum frame and the durable mesh fabric that forms the seating and backrest area. It highlights the structural integrity from a different angle.
7. Troubleshooting
If you encounter any issues with your tectake Alina Sun Loungers, please refer to the following common problems and solutions:
- Lounger feels unstable:
- Ensure all assembly screws are securely tightened.
- Verify the lounger is on a flat, even surface.
- Backrest not locking into position:
- Ensure the adjustment mechanism is free of obstructions.
- Lift the backrest fully before attempting to re-engage it into a notch.
- Squeaking noises:
- Apply a small amount of silicone spray to moving joints if necessary.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | TecTake |
| Model Number | 403067-NL |
| Overall Dimensions (Highest Position) | Approx. 59 x 158 x 81.5 cm (L x D x H) |
| Overall Dimensions (Lowest Position) | Approx. 59 x 180 x 50 cm (L x D x H) |
| Lying Surface (Fabric) | Approx. 45 x 101 cm (W x L) |
| Backrest Dimensions | Approx. 45 x 80 cm (W x H) |
| Backrest Adjustment Angles | 10°, 20°, 30°, 40°, 50° |
| Pillow Dimensions | Approx. 36 x 5 x 18 cm (L x D x H) |
| Leg Width | Approx. 5 cm |
| Maximum Load Capacity | 120 kg (264 lbs) |
| Weight (per lounger) | Approx. 12 kg (26.4 lbs) |
| Material | Powder-coated aluminum, polyethylene, polyvinyl chloride |
| Color | Black |
Figure 8.1: Front view of the sun lounger. This image displays the full length and width of the lounger from a head-on perspective, emphasizing its ergonomic shape and the integrated head pillow. It provides a clear view of the seating surface and the curved frame.
9. Warranty and Support
TecTake products are manufactured with high quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the purchase documentation or contact your retailer directly. Keep your proof of purchase for any warranty claims.
For further assistance, you may also visit the official TecTake website or contact their customer service department.
