Introduction
This instruction manual provides essential information for the safe and effective use of your vipolish 6-Piece 150ml Clear Plastic Refillable Squeeze Tubes. Please read this manual thoroughly before initial use and retain it for future reference. These tubes are designed for convenient storage and dispensing of various liquid and semi-liquid cosmetic and personal care products, ideal for travel or daily use.
Product Overview
The vipolish refillable squeeze tubes are crafted from durable PP plastic, featuring a clear design and a secure flip cap. Each set includes six tubes, each with a capacity of 150ml (approximately 5oz).
Key Features:
- Material: Constructed from PP Plastic for durability.
- Capacity: Each tube holds 150ml (5oz) of liquid.
- Design: Clear body for easy content identification and a flip cap for convenient access.
- Portability: Lightweight and compact, suitable for travel and daily use.
- Versatility: Ideal for facial cleansers, lotions, shampoos, shower gels, hand washes, and similar products.
- Leak-Proof: Designed to prevent spills and leaks.
Components:
- Squeeze Tube Body: The main container, made of clear, soft plastic.
- Flip Cap: A hinged cap that seals the opening and allows for controlled dispensing.
Figure 1: A set of six vipolish 150ml clear plastic squeeze tubes, showcasing their uniform design and transparent bodies.
Figure 2: Illustrates the flexibility of the tube, being gently squeezed by a hand to demonstrate its dispensing mechanism.
Figure 3: Detailed view of the tube's opening and flip cap, highlighting the wide caliber for easy refilling and the design of the leak-proof lid.
Figure 4: An alternative view of two vipolish squeeze tubes, highlighting their form factor.
Setup
- Initial Cleaning: Before first use, wash each tube and cap thoroughly with warm, soapy water. Rinse completely to remove any residue.
- Drying: Allow all components to air dry completely to prevent moisture from affecting the contents you intend to store.
- Inspection: Inspect each tube and cap for any signs of damage or defects. Do not use damaged tubes.
Operating Instructions
Filling the Tube:
- Remove Cap: Twist off the entire flip cap assembly from the tube.
- Pour Contents: Carefully pour your desired liquid or semi-liquid product (e.g., shampoo, lotion, cleanser) into the wide opening of the tube. Avoid overfilling; leave a small air gap at the top to prevent spillage when re-attaching the cap.
- Secure Cap: Screw the flip cap assembly back onto the tube, ensuring it is tightly sealed to prevent leaks.
Dispensing Contents:
- Open Flip Cap: Use your thumb or finger to lift the hinged part of the flip cap until it clicks open.
- Squeeze Tube: Gently squeeze the body of the tube to dispense the desired amount of product.
- Close Flip Cap: After dispensing, press the hinged part of the flip cap firmly back into place until it clicks shut, ensuring a secure, leak-proof seal.
Figure 5: A detailed view of the flip cap in its closed position, demonstrating the secure sealing mechanism.
Maintenance
Cleaning:
- Empty Contents: Ensure the tube is completely empty before cleaning.
- Disassemble: Remove the flip cap from the tube.
- Wash: Wash both the tube and cap with warm, soapy water. A small brush may be used for thorough cleaning of the cap's dispensing hole.
- Rinse: Rinse all components thoroughly with clean water to remove all soap residue.
- Dry: Allow components to air dry completely before refilling or storing.
Storage:
- Store empty tubes and caps in a clean, dry place away from direct sunlight and extreme temperatures.
- When filled, store upright to minimize any potential for leakage, although the caps are designed to be leak-proof.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Difficulty Squeezing | Contents are too thick or tube material feels rigid. | Ensure the product stored is suitable for a squeeze tube. For very thick substances, a wider opening or different dispenser type may be more appropriate. |
| Leakage from Cap | Cap not fully closed, cap not screwed on tightly, or cap/tube damage. | Ensure the flip cap is pressed down firmly until it clicks. Verify the entire cap assembly is screwed tightly onto the tube. Inspect for cracks or damage; replace if necessary. |
| Product Not Dispensing | Dispensing hole clogged or product too thick. | Check the dispensing hole for blockages and clear if necessary. If the product is too thick, it may not be suitable for this type of dispenser. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | vipolish |
| Model Number | GONG63851 |
| Material | PP Plastic |
| Color | Transparent |
| Capacity (per tube) | 150 Milliliters (approx. 5 oz) |
| Product Dimensions (approx.) | 145mm x 47mm (5.7" x 1.85") for 150ml size |
| Package Quantity | 6 Pieces |
Note: Dimensions are approximate and may vary slightly.
Warranty and Support
Specific warranty information for the vipolish 6-Piece 150ml Clear Plastic Refillable Squeeze Tubes is not provided in this manual. For details regarding warranty coverage, returns, or customer support, please refer to the product listing on the retailer's website or contact the seller directly.
Always ensure to purchase products from authorized sellers to ensure eligibility for any applicable support or warranty services.