1. Introduction
The Belanger Quadrato Bathtub/Shower Kit, model QUA90CMB, offers a modern design with durable construction for your bathroom. This kit is engineered for long-lasting, maintenance-free use, featuring Grade A brass construction and a high-quality ceramic cartridge. It includes a TempRIGHT temperature limiting device for safety and soft silicone nozzles for easy cleaning. This manual provides essential information for the proper installation, operation, and maintenance of your new shower system.
Key Features:
- Ergonomic single handle for easy volume and temperature adjustment.
- TempRIGHT adjustable temperature limiting device for scald prevention.
- Contemporary matte black finish for a sleek aesthetic.
- High-quality ceramic disc cartridge ensures dependable, long-lasting use.
- Solid brass construction provides superior durability.
2. Product Overview
Familiarize yourself with the components of your Belanger QUA90CMB shower system.
Figure 2.1: Complete Belanger QUA90CMB shower system, including the square showerhead, single-handle control, and tub spout, all in a matte black finish.
Figure 2.2: Front view of the shower control panel and tub spout, highlighting the minimalist square design.
Figure 2.3: Side view illustrating the rough-in valve assembly behind the wall plate, showcasing the brass construction.
Figure 2.4: An example of the Belanger QUA90CMB shower system installed in a contemporary bathroom setting, demonstrating its aesthetic integration.
3. Setup and Installation
Installation of the Belanger QUA90CMB shower system requires plumbing knowledge. It is highly recommended that installation be performed by a qualified professional plumber to ensure proper function and compliance with local building codes.
Pre-Installation Checklist:
- Ensure all components listed in the packaging are present.
- Turn off the main water supply before beginning any work.
- Review local plumbing codes and regulations.
- Gather necessary tools (e.g., pipe wrench, sealant, measuring tape).
Dimensional Diagram:
Figure 3.1: Detailed dimensional diagram providing critical measurements for rough-in valve placement, shower arm, and tub spout installation. Pay close attention to minimum and maximum wall opening dimensions and distances from the floor.
Note: Specific installation steps are typically provided in a separate detailed guide included with the product packaging. This manual provides general guidance.
4. Operation
The Belanger QUA90CMB shower system features a single ergonomic handle for intuitive control of water flow and temperature.
Using the Faucet:
- Turning On/Off: Rotate the single handle counter-clockwise to turn on the water. Continue rotating to increase water flow. Rotate clockwise to decrease flow and turn off.
- Adjusting Temperature: The handle also controls temperature. Typically, rotating the handle towards the left (counter-clockwise) will increase hot water, and rotating towards the right (clockwise) will increase cold water. Adjust gradually to find your desired temperature.
- Diverter (if applicable): If your model includes a diverter for switching between showerhead and tub spout, operate it by pulling or rotating the small knob on the tub spout or a separate diverter on the trim plate.
- TempRIGHT Device: The integrated TempRIGHT device limits the maximum hot water temperature to prevent scalding. This can be adjusted during installation by a professional if necessary.
5. Maintenance
Regular cleaning and proper care will ensure the longevity and optimal performance of your Belanger QUA90CMB shower system.
Cleaning Instructions:
- General Cleaning: Use a soft, damp cloth and mild soap to clean the matte black finish. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Silicone Nozzles: The showerhead features soft silicone nozzles. To remove mineral build-up (limescale), simply rub the nozzles with your finger or a soft brush. This helps maintain consistent water flow.
- Ceramic Cartridge: The ceramic disc cartridge is designed for maintenance-free operation and typically does not require lubrication or replacement under normal use.
- Drying: After each use, wiping the faucet dry can help prevent water spots and mineral deposits, preserving the matte black finish.
6. Troubleshooting
This section provides basic troubleshooting steps for common issues. For more complex problems, contact a qualified plumber or Belanger customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged showerhead nozzles; partially closed shut-off valves; low water pressure in home. | Clean silicone nozzles by rubbing them; ensure shut-off valves are fully open; consult a plumber for home water pressure issues. |
| Water Temperature Issues | TempRIGHT device setting; hot/cold water supply issues. | Consult a professional to adjust TempRIGHT device; check hot/cold water supply lines. |
| Leaking from Faucet | Loose connections; damaged O-rings or cartridge. | Tighten connections (do not overtighten); if leak persists, contact a professional for cartridge inspection/replacement. |
7. Specifications
Detailed technical specifications for the Belanger QUA90CMB Pressure Balanced Square Tub and Shower Faucet.
| Brand | Belanger |
| Model Number | QUA90CMB |
| Color | Matte Black |
| Material | Brass, Ceramic, Silicone |
| Finish Type | Matt |
| Number of Handles | 1 |
| Mounting Type | Wall Mount |
| Item Weight | 5.89 pounds |
| Product Dimensions | 7.68 x 7.72 x 6.69 inches |
| Included Components | (1) Shower system (Pressure balanced diverter valve, swivel shower head, bathtub spout, shower arm, flange, trim, and valve components) |
| Manufacturer | Plumb Pak |
| UPC | 064492150001 |
8. Warranty and Support
Belanger products are designed for quality and durability. Your QUA90CMB Pressure Balanced Square Tub and Shower Faucet is backed by a Limited Lifetime Warranty.
For detailed warranty information, claims, or technical support, please refer to the warranty card included with your product or visit the official Belanger website. It is recommended to retain your proof of purchase for warranty purposes.