XINYANG 4PCS Xenon White LED License Plate Light Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your XINYANG 4PCS Xenon White LED License Plate Lights. These lights are designed for universal fit across various 12V-24V DC vehicles and applications, offering bright, waterproof illumination.

2. Safety Information

Always disconnect power before installation or maintenance to prevent electrical shock.
Ensure correct wiring polarity (red wire for positive, black wire for negative) to avoid damage to the lights.
Verify the voltage of your vehicle's electrical system (12V-24V DC) matches the product specifications.
Use appropriate tools and wear safety glasses during installation.
If unsure about any installation step, consult a qualified professional.

3. Package Contents

Your package should contain the following items:

4 x XINYANG Xenon White LED License Plate Lights
Mounting Screws

Four XINYANG Xenon White LED License Plate Lights and a set of mounting screws.

Image: Contents of the XINYANG 4PCS Xenon White LED License Plate Light package.

4. Specifications

Brand	XINYANG
Model Number	6smd LED license plate light-4pcs
Light Color	Xenon White (6000K)
LED Type	6-SMD LED Chips
Voltage	12V-30V DC
Wattage	1.2W per bulb
Brightness	100 lumens per bulb
Waterproof Grade	IP65
Lifespan	50,000+ hours
Dimensions (L x W x H)	66 x 33 x 22 mm (2.6 x 1.3 x 0.9 inches)
Wire Length	152 mm (6 inches)
Weight	14g (0.03lb) per bulb
Lens Material	ABS
Automotive Fit Type	Universal Fit

Diagram showing the dimensions of the LED license plate light: 66mm length, 33mm width, 22mm height, and 152mm wire length.

Image: Product dimensions for the XINYANG LED License Plate Light.

Image detailing product specifications including voltage, power, color, lumen, lifespan, and waterproof grade.

Image: Detailed product specifications for the XINYANG LED License Plate Light.

5. Installation

Follow these steps for proper installation:

Prepare Mounting Location: Choose a flat surface for mounting. The lights can be mounted using the provided screws. For a secure fit, ensure the surface is clean and dry.
Mark and Drill: Use the light as a template to mark the positions for the two mounting screws. Drill pilot holes if necessary, ensuring they are appropriate for the screw size. If routing wires through the mounting surface, drill a small hole for the wires.
Wire Connection: Connect the red wire of the LED light to the positive (+) terminal of your 12V-24V DC power source. Connect the black wire to the negative (-) or ground terminal. Ensure connections are secure and insulated to prevent short circuits.
Mount the Light: Position the light over the drilled holes and secure it with the provided screws. Ensure the light is firmly attached.
Test Functionality: Once installed, turn on the power to test the lights.

Video: Demonstration of installation steps, brightness, and waterproof features for a similar 12V LED license plate light.

6. Operation

These LED lights are designed for simple operation. Once correctly wired to a 12V-24V DC power source, they will illuminate when power is supplied. Some installations may include an external switch for convenient control.

7. Maintenance

Cleaning: Clean the lights periodically with a soft cloth and mild soap to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens.
Waterproof Design: The lights feature an IP65 waterproof rating, making them resistant to dust and water jets. This allows for worry-free use in various weather conditions, including rain and snow.
Inspection: Regularly inspect wiring and mounting for any signs of wear or damage. Ensure all connections remain secure.

Image demonstrating the IP65 waterproof capability of the LED light, showing water being sprayed on it.

Image: The IP65 waterproof design ensures durability in wet conditions.

8. Troubleshooting

Lights Not Illuminating:
- Check power connections: Ensure red wire is connected to positive and black to negative.
- Verify power source: Confirm the vehicle's power source is active and within the 12V-24V DC range.
- Inspect fuses: Check for blown fuses in the vehicle's electrical system.
Dim or Flickering Lights:
- Check for loose connections or corrosion at wiring points.
- Ensure adequate voltage supply from the power source.
Water Inside Light Housing:
- While the lights are IP65 rated, extreme conditions or improper sealing during installation can lead to moisture. Inspect for cracks or damage to the housing.

9. Versatile Applications

These LED lights are suitable for a wide range of applications due to their compact size, brightness, and durable construction:

License Plate Light: Provides clear illumination for vehicle license plates.
Step Courtesy Light: Enhances visibility when entering or exiting vehicles.
Dome/Roof Light: Offers interior lighting for cabins or cargo areas.
Trunk/Cargo Light: Illuminates storage compartments in trucks, SUVs, and vans.
Under Hood Light: Provides light for engine bay inspections or maintenance.
Universal Vehicle Use: Compatible with trucks, SUVs, trailers, vans, RVs, motorcycles, ATVs, UTVs, scooters, and boats.

Image showing the LED light illuminating a license plate and the underside of a trailer, demonstrating its brightness and application.

Image: Examples of the LED light used for license plate and under-trailer illumination.

Collage of various vehicles including trucks, SUVs, trailers, vans, and boats, indicating wide application of the LED lights.

Image: Diverse applications across different vehicle types.

10. Warranty and Support

XINYANG offers a 12-month after-sale service for returns or refunds without risk. For any questions or support needs, please contact us. We are committed to providing a satisfactory solution within 24 hours.

XINYANG 6smd LED license plate light