Fischer ProfiPlus Bike Lift (Model 50387) Instruction Manual

Introduction

The Fischer ProfiPlus Bike Lift is designed for space-saving and practical storage of heavy and bulky items, such as electric bicycles, roof boxes, or other equipment. This ceiling lift system has a maximum load capacity of 57 kg, providing a secure and efficient storage solution for your garage or cellar.

Important Safety Information

• Always ensure the ceiling structure can safely support the weight of the lift system plus the maximum load (57 kg). Consult a professional if unsure.
• Use appropriate mounting hardware for your ceiling type. The provided hardware is suitable for concrete ceilings.
• Do not exceed the maximum load capacity of 57 kg. Overloading can lead to system failure and injury.
• Regularly inspect all components, especially the rope, pulleys, and mounting points, for wear or damage. Replace worn parts immediately.
• Keep hands and fingers clear of moving parts during operation.
• Ensure the item being lifted is balanced and securely attached to the hooks before raising or lowering.
• Keep children and pets away from the lift system during operation.

Package Contents

Before beginning installation, verify that all components are present:

• 2x Ceiling Mounts with Pulleys
• 2x Lifting Hooks with Pulleys
• 1x Rope (approx. 15 meters)
• 1x Rope Cleat
• Mounting Hardware (screws, anchors)
• Instruction Manual (this document)

Figure 1: All components of the Fischer ProfiPlus Bike Lift, including ceiling mounts, lifting hooks, rope, and cleat.

Setup and Installation

Proper installation is crucial for the safe operation of your bike lift. This section provides detailed steps. For a visual guide, please refer to the installation video below.

Tools Required (Not Included):

• Drill
• Drill bits appropriate for your ceiling material and mounting hardware
• Pencil
• Measuring Tape
• Screwdriver
• Ladder

Installation Steps:

1. Determine Mounting Location: Choose a location on your ceiling that provides sufficient space to lift and store your bicycle without obstruction. Ensure the ceiling is structurally sound and can support the weight. The lift is suitable for ceiling heights up to 4 meters.
2. Mark Drill Holes: Position the two ceiling mounts on the ceiling. The distance between them should be slightly less than the length of the item you intend to lift (e.g., your bicycle). Mark the drill holes for each mount using a pencil.
3. Drill Holes: Drill pilot holes at the marked locations. Ensure the drill bit size matches the provided anchors/screws.
4. Attach Ceiling Mounts: Securely fasten both ceiling mounts to the ceiling using the provided screws and anchors. Ensure they are firmly attached and do not wobble.
5. Assemble Hooks: Attach the lifting hooks to their respective pulley mechanisms. The rubber-coated hooks are designed to protect your bicycle's paintwork from scratches.
6. Thread the Rope: This step is critical for proper operation.
   • Pass one end of the rope through the pulley on one of the lifting hooks.
   • Thread the rope up to the nearest ceiling mount, through its pulley, and then across to the second ceiling mount.
   • Pass the rope through the pulley on the second ceiling mount, then down to the second lifting hook, and through its pulley.
   • Finally, bring the rope back up to the first ceiling mount and thread it through the locking mechanism. The remaining free end of the rope will be used to operate the lift.

   Note: Refer to the video for a clear demonstration of rope threading. Incorrect threading can prevent the locking mechanism from functioning correctly.
7. Install Rope Cleat: Choose a convenient location on a wall, within easy reach, to mount the rope cleat. This will be used to secure the rope and hold the lifted item in place. Securely fasten the cleat to the wall.

Figure 2: Ceiling mount with integrated pulleys, securely fastened to the ceiling. This component guides the rope and supports the load.

Figure 3: Detail of the rubber-coated hooks, which prevent scratches and damage to the bicycle frame during lifting and storage.

Operating Instructions

Once installed, the Fischer ProfiPlus Bike Lift is simple to operate:

1. Attach Item: Position the bicycle or other item directly below the hooks. Carefully attach the hooks to the frame of the bicycle, ensuring it is balanced. The rubber coating on the hooks protects the frame.
2. Lift Item: Pull the free end of the rope downwards to raise the item. The pulley system reduces the effort required. Guide the item as it ascends to prevent swinging or hitting obstacles.
3. Secure Item: Once the item reaches the desired height, release the rope slowly. The automatic locking mechanism will engage, holding the item in place. For added security, wrap the rope around the wall-mounted cleat.
4. Lower Item: To lower the item, gently pull the rope to disengage the locking mechanism. Slowly release the rope to allow the item to descend. Guide the item carefully until it is safely on the ground.

Figure 4: An electric bicycle safely stored overhead using the bike lift, demonstrating the space-saving benefit.

Figure 5: The bike lift can also be used to store other bulky items, such as a roof box, maximizing garage space.

Figure 6: Example of a ladder being stored overhead, illustrating the versatility of the lift system for various items.

Maintenance

Regular maintenance ensures the longevity and safe operation of your Fischer ProfiPlus Bike Lift:

• Rope Inspection: Periodically check the rope for fraying, cuts, or excessive wear. If any damage is observed, replace the rope immediately with a high-strength rope of similar diameter and material.
• Pulley Lubrication: Apply a small amount of silicone spray or light lubricant to the pulley axles every 6-12 months to ensure smooth operation.
• Mounting Hardware Check: Annually inspect all screws and anchors for tightness. Retighten if necessary. Check for any signs of corrosion or damage to the metal components.
• Hook Condition: Ensure the rubber coating on the hooks is intact to protect your items. Replace hooks if the coating is significantly damaged.

Troubleshooting

Specifications

Warranty and Support

The Fischer ProfiPlus Bike Lift comes with a 1-year availability of spare parts. For warranty claims, technical support, or to order replacement parts, please contact Fischer customer service through their official website or your retailer.

Please retain your proof of purchase for warranty purposes.