Product Overview
The GUTA Tire Pressure Sensor is a high-performance 433.92 MHz sensor designed to monitor tire pressure and temperature for various large vehicles, including RVs, trailers, coaches, motor homes, and fifth wheels. It ensures accurate real-time data transmission to a compatible GUTA Wireless TPMS monitor (M20 Model and GT107 Model). This sensor is built for durability, featuring a high-performance CR2032 battery capable of withstanding extreme temperatures and an original import chip for reliable operation in all weather conditions.
Image: GUTA TPMS system showing compatibility with various large vehicles like trucks, RVs, and buses.
Setup and Installation
Proper installation of your GUTA Tire Pressure Sensor is crucial for accurate readings and optimal performance. Ensure your tire pressure is at the required or standard level before installation.
Sensor Installation
- Ensure the display monitor is powered on.
- Install the supplied anti-theft hex nut onto the tire valve. If the anti-theft function is not desired, this step can be skipped.
- Screw the sensor clockwise onto the tire valve.
- Use the provided wrench to tighten the hex nut counterclockwise against the sensor to secure it and activate the anti-theft feature.
- Inflating tires does not require removing the sensor.
Video: Detailed guide on how to install the SQ sensor and change its battery.
Video: Step-by-step instructions for installing the GS02 GUTA Tire Pressure Sensor.
Sensor Pairing
Before pairing, ensure the display is powered on. When pairing sensors, keep other sensors at least 2 feet away to prevent incorrect pairing.
- Turn on the display monitor.
- Access the pairing menu on your GUTA monitor. This usually involves pressing a 'CODE' or 'SET' button.
- Select the desired tire position on the monitor's display.
- Place the sensor next to the monitor's antenna. The monitor will display "TPMS PAIRING..."
- The sensor will successfully pair, indicated by a beep and the monitor displaying "STATE:PAIR OK". The tire position on the display will then show the current pressure value.
- Repeat for any additional sensors.
Video: Installation guide for Flow Thru Sensors, including pairing steps.
Operating Instructions
Once installed and paired, your GUTA Tire Pressure Sensor system provides continuous monitoring of your vehicle's tire conditions.
Real-time Monitoring
The system provides real-time display of tire pressure and temperature. The monitor will cycle through pressure and temperature readings every 5 seconds in normal display mode.
Image: GUTA TPMS display illustrating real-time tire pressure and temperature, along with indicators for high/low pressure, sensor low battery, data loss, high temperature, display low battery, and rapid leakage.
Maintenance
Regular maintenance ensures the longevity and accuracy of your GUTA Tire Pressure Sensor.
Sensor Battery Replacement
- Open the sensor cover by turning it anti-clockwise using the provided wrench.
- Replace the old CR2032 battery with a new one, ensuring the positive pole is facing upwards.
- Check the waterproof O-ring for any damage. Replace it with a new one if it is broken to maintain water resistance.
- Screw the sensor cover clockwise with the wrench until secure.
Video: Instructions for replacing the battery in a GS03 Flow Thru Sensor.
Image: Close-up view of a hand installing a GUTA sensor onto a tire valve, demonstrating the final step of securing the sensor.
Troubleshooting
If you encounter issues with your GUTA Tire Pressure Sensor, refer to the following common solutions.
Sensor Not Pairing or Reading
- Ensure the monitor is powered on and within range of the sensor.
- Verify that the sensor is correctly installed and tightened on the tire valve.
- Re-attempt the pairing process, ensuring no other sensors are nearby during pairing.
- Check the sensor battery. If low, replace it following the battery replacement instructions.
Deleting Sensor ID
If a sensor needs to be replaced or removed from the system, its ID can be deleted from the monitor.
- In standby mode, press the 'Setting' button on your monitor.
- Navigate to the 'Pair TPMS Tire' or 'Delete Sensor ID' option.
- Select the desired tire position whose sensor ID you wish to delete.
- Confirm deletion. The monitor will indicate successful deletion, and the tire position will show no reading.
Specifications
| Feature | Specification |
|---|---|
| Brand | GUTA |
| Working Frequency | 433.92 MHz |
| Pressure Range | 0-188 PSI |
| Measurement Accuracy | +/- 1 PSI |
| Item Weight | 18 Grams (0.635 ounces) |
| Working Temperature | -40°C ~ 80°C |
| Storage Temperature | -40°C ~ 85°C |
| Battery Type | Cr2032 (high performance, 120 degrees high temperature resistant) |
| Compatibility | GUTA Wireless TPMS (M20 Model and GT107 Model) |
Warranty and Support
GUTA stands behind the quality of its products. This sensor was processed to the same standards as OE (Original Equipment) for accuracy and sensitivity.
- 2-Year Warranty: The GUTA Tire Pressure Sensor comes with a 2-year warranty.
- Customer Support: If you encounter any problems or have questions, please do not hesitate to contact GUTA customer service. Your satisfaction is our priority.