vidaXL Reclining Chairs with Cushions, Rattan, Beige (Set of 2) - Instruction Manual

1. Introduction

This manual provides essential instructions for the assembly, operation, and maintenance of your vidaXL Reclining Chairs with Cushions. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.

The vidaXL reclining chairs are designed for outdoor use, offering comfort and durability. They feature weather-resistant woven resin and sturdy powder-coated steel frames, making them suitable for daily outdoor living.

2. Safety Information

• Ensure all components are securely fastened before use.
• Do not exceed the maximum weight capacity (intended for single adult use).
• Keep children away during assembly. Small parts may pose a choking hazard.
• Avoid placing the chairs on uneven surfaces to prevent tipping.
• Do not stand on the chairs.
• Regularly inspect the chairs for any signs of wear or damage. Discontinue use if damage is found.

3. Package Contents

Verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• 2 x Reclining Chair Frames (Woven Resin and Steel)
• 2 x Seat Cushions (Beige)
• Assembly Hardware (screws, bolts, wrench, etc. - assumed)
• Instruction Manual (this document)

4. Setup and Assembly

Assembly is required for these chairs. Follow the steps below carefully.

1. Step 1: Unpack Components

   Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.

   

   Image: Two fully assembled beige rattan reclining chairs with light-colored cushions, viewed from the front.

2. Step 2: Attach Legs/Base

   Identify the chair base and legs. Securely attach the legs to the main chair frame using the provided hardware. Ensure all screws are tightened, but do not overtighten until all parts are aligned.

   

   Image: A single beige rattan reclining chair, showing the front view and the overall structure before reclining.

3. Step 3: Assemble Reclining Mechanism

   Connect the reclining mechanism components as per the diagram. This typically involves attaching the backrest and footrest sections to the main frame, ensuring the gas lift mechanism is correctly installed for smooth operation.

   

   Image: A beige rattan reclining chair with dimensions (height 108cm, width 62cm, depth 58cm) indicated, providing a visual guide for assembly and space planning.

4. Step 4: Final Tightening and Cushion Placement

   Once all parts are assembled and aligned, fully tighten all screws and bolts. Place the beige seat cushions onto the chairs. Ensure the chairs are stable before use.

   

   Image: A close-up view of the beige rattan weave material, highlighting the texture and construction of the chair.

5. Operating Instructions

The chairs feature an adjustable design with a gas lift mechanism for reclining the backrest and footrest.

1. To Recline the Chair:

   Locate the lever or handle on the side of the chair (typically on the right side). While seated, pull the lever and gently lean back. The backrest will recline, and the footrest will extend simultaneously. Release the lever when you reach your desired position.

   

   Image: A beige rattan reclining chair shown in a fully reclined position, with the backrest lowered and the footrest extended.

2. To Return to Upright Position:

   While seated, pull the lever and gently push forward with your back and legs. The chair will return to its upright position. Release the lever once upright.

   

   Image: A side view of the reclining chair illustrating the range of motion for the backrest and footrest during reclining.

6. Maintenance

Proper care will extend the life and appearance of your vidaXL reclining chairs.

• Cleaning the Rattan: The weather-resistant woven resin is easy to clean. Wipe down with a damp cloth and mild soap solution. Rinse with clean water and allow to air dry. Avoid harsh chemicals or abrasive cleaners.

  Image: A close-up view of the chair's seat area, showing the intricate rattan weave pattern without the cushion.
• Cushion Care: The cushions are designed for outdoor use. Spot clean with a mild detergent and water. For deeper cleaning, refer to the care label on the cushion cover. Store cushions indoors during inclement weather or prolonged periods of non-use to prevent fading and mildew.

  Image: A detailed close-up of the beige seat cushion resting on the rattan chair, showing its texture and fit.

• Frame Care: The powder-coated steel frames are rust-resistant. If scratches occur, touch up with appropriate outdoor paint to prevent rust.
• Winter Storage: During winter months or extended periods of non-use, it is recommended to store the chairs in a dry, sheltered area or cover them with protective outdoor furniture covers.

7. Troubleshooting

• Chair feels wobbly after assembly:

  Ensure all bolts and screws are fully tightened. If the issue persists, disassemble and reassemble, ensuring all parts are correctly aligned before tightening.
• Reclining mechanism is stiff or not working smoothly:

  Check for any obstructions in the mechanism. Ensure no parts are bent or damaged. A small amount of silicone-based lubricant can be applied to moving parts if necessary, avoiding contact with rattan or cushions.

• Rattan appears discolored or faded:

  Prolonged exposure to direct sunlight can cause some fading over time. Regular cleaning and storing the chairs in shaded areas or covering them when not in use can help mitigate this.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the retailer's policy or contact vidaXL customer service directly. Keep your purchase receipt as proof of purchase.

You can visit the vidaXL store for more information: vidaXL Store