ASHCROFT Milton

ASHCROFT Milton Sectional Sofa Instruction Manual

Model: Milton | Brand: ASHCROFT

Introduction

Thank you for choosing the ASHCROFT Mid-Century Modern Milton Tan Leather Sectional Sofa. This manual provides essential information for the safe and proper assembly, use, and maintenance of your new furniture. Please read these instructions carefully before proceeding with assembly and retain them for future reference.

ASHCROFT Milton Tan Leather Sectional Sofa, front view

Image: The ASHCROFT Milton Tan Leather Sectional Sofa, showcasing its mid-century modern design and tan leather upholstery.

Safety Information

To ensure safe use and prevent damage, please observe the following safety guidelines:

  • Fire Hazard: Keep the sofa away from open flames, fireplaces, heaters, and other high heat sources to prevent fire.
  • Child and Pet Safety: Supervise children and pets around the sofa to prevent accidents, such as climbing or getting trapped.
  • Weight Capacity: Do not exceed the maximum weight capacity of 800 pounds. Overloading can cause structural damage and injury.
  • Assembly: Ensure all components are correctly assembled and tightened before use. Periodically check and retighten all fasteners.
  • Placement: Place the sofa on a level surface to prevent tipping.
  • Moving: When moving the sofa, lift it rather than dragging it to prevent damage to the legs and frame.

Setup and Assembly

Assembly is required for this sectional sofa. It is recommended that two adults perform the assembly. Ensure you have ample space and all components before beginning.

Required Tools (Not Included):

  • Phillips head screwdriver
  • Allen wrench (often included with hardware, but good to have a set)

Package Contents:

  • Sofa Section (1)
  • Chaise Section (1)
  • Legs (Quantity as per design, typically 8-10)
  • Assembly Hardware (bolts, washers, nuts, connecting brackets)
ASHCROFT Milton Tan Leather Sectional Sofa, showing the right-hand chaise configuration

Image: An overhead view of the ASHCROFT Milton Sectional Sofa, illustrating its L-shape configuration with the right-hand chaise.

Assembly Steps:

  1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches. Verify that all listed components and hardware are present.
  2. Attach Legs: Turn each sofa section (sofa and chaise) upside down. Locate the pre-drilled holes on the bottom frame. Attach the wooden legs using the provided bolts and washers. Tighten securely with the Allen wrench, but do not overtighten.
  3. Position Sections: Carefully turn both the sofa section and the chaise section upright. Position them next to each other in the desired L-shape configuration (right-hand chaise).
  4. Connect Sections: Locate the metal connecting brackets on the underside of both sofa sections. Align the brackets and slide them together until they lock. If your model uses bolts to connect, align the pre-drilled holes and secure the sections together using the provided bolts and nuts.
  5. Final Check: Ensure all legs are firmly attached and all connecting hardware is secure. Gently push and pull the sofa to confirm stability.

Operating Instructions (General Use)

The ASHCROFT Milton Sectional Sofa is designed for comfortable seating in indoor living spaces. Follow these guidelines for optimal use:

  • Seating: Use the sofa for its intended purpose of seating. Avoid standing or jumping on the cushions or frame.
  • Weight Distribution: Distribute weight evenly across the seating area. Avoid concentrating heavy loads on a single point.
  • Sunlight Exposure: Prolonged exposure to direct sunlight can cause leather to fade or dry out. Position the sofa away from direct sunlight or use window coverings.
  • Heat Sources: Keep the sofa a safe distance from heat sources like radiators or heating vents to prevent drying and cracking of the leather.
ASHCROFT Milton Tan Leather Sectional Sofa in a living room setting

Image: The ASHCROFT Milton Sectional Sofa positioned in a modern living room, demonstrating its aesthetic appeal and functional design.

Care and Maintenance

Proper care will extend the life and beauty of your ASHCROFT Milton Sectional Sofa.

General Cleaning:

  • Dusting: Regularly dust the leather surface with a soft, dry cloth.
  • Spills: For spills, immediately blot with a clean, absorbent cloth. Do not rub. For most spills, a damp cloth with mild soap and water can be used, then wipe dry. Always test any cleaning solution on an inconspicuous area first.
  • Product Care Instructions: As per manufacturer, use a damp cloth for general cleaning.

Leather Care:

  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the leather finish.
  • Conditioning: Periodically (every 6-12 months) apply a leather conditioner suitable for genuine leather to keep it supple and prevent cracking. Follow the conditioner manufacturer's instructions.
  • Sharp Objects: Keep sharp objects away from the leather to prevent punctures or scratches.

Frame and Legs:

  • Tighten Fasteners: Periodically check and retighten all bolts and screws, especially those connecting the legs and sectional pieces, to maintain stability.
  • Wood Care: Wipe wooden legs with a soft, damp cloth. Avoid excessive moisture.
Close-up of the tan leather upholstery and wooden legs of the ASHCROFT Milton Sectional Sofa

Image: A detailed view of the tan genuine leather upholstery and the sturdy wooden legs, highlighting the quality of materials.

Troubleshooting

This section addresses common issues you might encounter with your sectional sofa.

ProblemPossible CauseSolution
Sofa feels wobbly or unstable.Loose legs or connecting hardware. Uneven floor.Check and tighten all leg bolts and sectional connectors. Ensure the sofa is on a level surface. Use furniture glides or shims if necessary.
Leather appears dry or cracked.Lack of conditioning. Exposure to direct sunlight or heat.Apply a suitable leather conditioner. Reposition the sofa away from direct sunlight or heat sources.
Squeaking noises during use.Loose frame joints or hardware.Inspect all visible joints and hardware. Tighten any loose fasteners. If the issue persists, contact customer support.
Minor scratches or scuffs on leather.Normal wear and tear. Accidental contact with sharp objects.For minor scratches, gently rub with a clean finger to redistribute natural oils. For deeper scratches, consult a professional leather repair specialist.

Specifications

Key specifications for the ASHCROFT Mid-Century Modern Milton Tan Leather Sectional Sofa:

  • Model: Milton
  • Brand: ASHCROFT
  • Type: Sectional Sofa (Right Hand Facing Chaise)
  • Upholstery Material: Genuine Leather
  • Upholstery Color: Tan
  • Frame Material: Solid, Kiln-Dried Hardwood
  • Cushion Construction: High-density foam with Pirelli webbing system
  • Seat Firmness: Medium-Firm
  • Overall Dimensions (D x W x H): 82"D x 97"W x 33"H
  • Sofa Section Dimensions (H x W x D): 33"H x 64"W x 33.5"D
  • Chaise Section Dimensions (H x W x D): 33"H x 33"W x 82"D
  • Seat Height (Floor to Seat): 17"
  • Seat Depth (Front to Back): 72" (for chaise)
  • Back Cushion Height: 27.5"
  • Leg Height: 7"
  • Arm Height (Floor to Arm): 23.5"
  • Item Weight: 142 lbs
  • Weight Capacity: 800 lbs
  • Assembly Required: Yes
  • Indoor/Outdoor Usage: Indoor only

Warranty and Customer Support

Your ASHCROFT Milton Sectional Sofa comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your purchase or contact ASHCROFT customer support directly.

If you have any questions, require assistance with assembly, or need to report a defect, please contact ASHCROFT customer service through their official website or the retailer from whom you purchased the product. Please have your purchase receipt and model information (Milton, ASIN: B088CYNLYQ) ready when contacting support.

Related Documents - Milton

Preview Ashcroft S10 & S50 RTD and Thermocouple Installation and Maintenance Guide
Provides detailed installation and maintenance instructions for Ashcroft S10 and S50 RTD and Thermocouple temperature sensors. Covers general precautions, storage, specific installation procedures for RTDs and thermocouples, and maintenance guidelines to ensure accurate measurements and longevity.
Preview Milton Thermosteel Vacuum Insulated Bottle: Usage, Cleaning, and Warranty Information
A guide to using, cleaning, and understanding the warranty for the Milton Thermosteel vacuum insulated bottle, detailing its insulation features and care instructions.
Preview Ashcroft G2, G3, GV & T2 Pressure Transmitter Instruction Sheet
Instruction sheet for Ashcroft G2, G3, GV, and T2 pressure transmitters, covering electrical terminations, wiring, installation, and safety warnings.
Preview Ashcroft A4 Intrinsically Safe & Non-Incendive Pressure Transmitter: Installation and Safety Instructions
Comprehensive guide for installing and safely operating the Ashcroft A4 Intrinsically Safe and Non-Incendive Rated Pressure Transmitter, including hazardous area guidelines, electrical specifications, and wiring diagrams.
Preview Ashcroft RXLdp Instruction Sheet: Installation and Operation Guide
Detailed instruction sheet for the Ashcroft Model RXLdp low differential pressure transducer, covering safety warnings, description, mounting, piping, power requirements, electrical connections, and dimensions.
Preview Ashcroft ZT11 High Purity Transmitter: Installation and Maintenance Instructions
Comprehensive installation, maintenance, wiring, and calibration guide for the Ashcroft ZT11 High Purity Transmitter, designed for the semiconductor industry. Includes safety precautions, troubleshooting, and warranty information.