Buyers Products Company 3032933

Buyers Products 3032933 Green Corner Strobe D-Fuser Instruction Manual

1. Product Overview

The Buyers Products 3032933 Green Corner Strobe D-Fuser is an LED corner strobe head designed for integration with Buyers Products 24 inch, 49 inch, or 60 inch LED modular light bars. This unit provides a green strobe light function, enhancing visibility for work trucks and utility vehicles. It features a durable, dustproof, and waterproof construction.

Buyers Products 3032933 Green Corner Strobe D-Fuser

Image 1.1: Front view of the Buyers Products 3032933 Green Corner Strobe D-Fuser.

2. Safety Information

Please read and understand all instructions before installing or operating this product. Failure to do so may result in property damage, personal injury, or product malfunction.

  • Always disconnect power before performing any installation or maintenance.
  • Ensure all wiring connections are secure and properly insulated to prevent short circuits.
  • Mount the strobe head securely to prevent detachment during vehicle operation.
  • Verify that the power source matches the product's electrical requirements.
  • Do not modify the product in any way, as this may void the warranty and create safety hazards.

3. Package Contents

  • 1 x Buyers Products 3032933 Green Corner Strobe D-Fuser (LED Strobe Head)

4. Setup and Installation

This LED corner strobe head is designed for use with Buyers Products 24 inch, 49 inch, or 60 inch LED modular light bars. Installation typically involves mounting the strobe head to the light bar and connecting it to the vehicle's electrical system.

4.1 Mounting

The strobe head utilizes a bracket mount system. Securely attach the strobe head to the designated location on your compatible Buyers Products LED modular light bar using appropriate fasteners. Ensure the mounting is rigid and can withstand vehicle vibrations and environmental conditions.

Angled back view of the strobe head showing mounting points

Image 4.1: Angled back view of the strobe head, illustrating mounting points and wiring.

4.2 Electrical Connection

The strobe head operates on a corded electric power source. Connect the wiring harness from the strobe head to the corresponding power connections on your Buyers Products LED modular light bar or vehicle's electrical system. Refer to the light bar's specific wiring diagram for correct polarity and connection points. Ensure all connections are waterproof and protected from abrasion.

Back view of the strobe head with wiring harness

Image 4.2: Rear view of the strobe head, showing the integrated wiring harness for electrical connection.

5. Operating Instructions

Once properly installed and connected to a compatible Buyers Products LED modular light bar, the Green Corner Strobe D-Fuser will activate as part of the light bar's strobe functions. The operation is controlled by the light bar's master control system.

  • Ensure the light bar system is powered on.
  • Select the desired strobe pattern or mode via the light bar's controls.
  • The green corner strobe head will flash in synchronization with the selected pattern.
Close-up view of the green LED strobe head illuminated

Image 5.1: Illuminated view of the green LED strobe head, demonstrating its operational state.

6. Maintenance

The Buyers Products 3032933 Green Corner Strobe D-Fuser is designed for durability and minimal maintenance. Regular inspection and cleaning will help ensure optimal performance.

  • Cleaning: Periodically clean the lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the plastic.
  • Inspection: Regularly check the mounting hardware for tightness and the wiring for any signs of wear, corrosion, or damage. Address any issues promptly.
  • The unit is dustproof and waterproof, but avoid prolonged submersion or high-pressure washing directly on electrical connections.

7. Troubleshooting

If the Green Corner Strobe D-Fuser is not functioning as expected, consider the following:

  • No Light Output:
    • Check all electrical connections for proper contact and secure wiring.
    • Verify that the light bar system is receiving power.
    • Ensure the light bar's control system is set to an active strobe mode.
    • Inspect for any blown fuses in the vehicle's electrical system or the light bar's circuit.
  • Intermittent Operation:
    • Check for loose wiring connections or damaged insulation.
    • Ensure the power supply is stable and within the specified voltage range.

If issues persist after troubleshooting, contact customer support.

8. Specifications

FeatureSpecification
Model Number3032933
ColorGreen
ShapeRectangular
MaterialPlastic
Finish TypePainted
Light Source TypeLED
Power SourceCorded Electric
Item Weight3.36 ounces
Mounting TypeBracket Mount
Product Dimensions7.9"L x 5.45"W x 1.55"H
Special FeaturesDustproof, Waterproof
UsageStrobe Lights
UPC724920154932

9. Warranty Information

This Buyers Products 3032933 Green Corner Strobe D-Fuser is backed by a 5-year warranty. This warranty covers defects in materials and workmanship. Please retain your proof of purchase for warranty claims. The warranty does not cover labor costs associated with removal or reinstallation.

10. Customer Support

For technical assistance, warranty claims, or further information regarding your Buyers Products 3032933 Green Corner Strobe D-Fuser, please contact Buyers Products Company customer service. Refer to the official Buyers Products Company website for current contact details.

Website: www.buyersproducts.com

© 2023 Buyers Products Company. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.