isinlive HP01 HP02 HEPA Filter Replacement for Dyson Purifiers User Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of your isinlive HP01 HP02 HEPA Filter Replacement. This filter is designed to maintain optimal air quality in compatible Dyson Pure Hot+Cool Link and Pure Cool Link Desk Purifiers.

Compatibility

This filter replacement is specifically designed for the following Dyson models:

• Dyson Pure Cool Link Desk Purifiers: DP01, DP02, DP03 (Part Numbers: 305214-01, 308033-01, 308034-01, 309423-01, 308404-01)
• Dyson Pure Hot + Cool Link Purifying Heaters: HP01, HP02, HP03 (Part Numbers: 305571-01, 305570-01, 307058-01, 308396-01, 308395-01)

Please verify your air purifier's model number before installation to ensure proper fit.

This image illustrates the specific Dyson models that are compatible with this filter (HP01/HP02/HP03 and DP01/DP02/DP03) and provides examples of models that are not compatible.

Filter Technology

The isinlive replacement filter features a 3-in-1 filtration system designed for comprehensive air purification:

• Pre-Filter: Captures larger particles such as dust, hair, and pet fur.
• H13 True HEPA Filter: Traps fine particles, including 99.97% of airborne particles as small as 0.3 microns, such as fine dust, pet dander, and pollen.
• Activated Carbon Layer: Absorbs household odors, fumes, and volatile organic compounds (VOCs) like pet odors, cooking smells, and cigarette smoke.

This diagram illustrates the multi-layered filtration system, highlighting the activated carbon, HEPA, and pre-filter components.

This image details the filter's high efficiency in capturing 99.97% of airborne particles, including common allergens and pollutants.

Installation Instructions

Follow these steps to replace the filter in your Dyson purifier:

1. Power Off and Unplug: Ensure your Dyson purifier is turned off and unplugged from the power outlet. Allow it to cool if it has been operating in heating mode.
2. Remove Outer Casing: Locate the two release buttons on the sides of the purifier's outer casing. Press these buttons and lift the outer casing upwards to remove it.
3. Remove Old Filter: Carefully lift out the old filter from the base of the purifier. Dispose of the used filter responsibly.
4. Insert New Filter: Place the new isinlive filter into the base of the purifier, ensuring it sits securely. The green rings should align with the purifier's base.
5. Reattach Outer Casing: Align the outer casing with the base and gently push it down until it clicks into place, securing the new filter.
6. Reset Filter Life Indicator: Plug the purifier back in. To reset the filter life indicator, press and hold the standby button on the remote control for approximately 6 seconds until the display shows the filter life has been reset.

This image shows the process of pressing the release button to open the purifier's filter compartment.

This image illustrates the removal of the old filter, preparing the unit for the new replacement filter.

Operating Considerations

With the new filter installed, your Dyson purifier will continue to provide clean air. The 360° filtration system works continuously to absorb original air and release fresh, purified air. The purifier automatically adjusts its operation based on detected air quality.

This filter supports the multi-functionality of your Dyson device, including heating in winter and cooling in summer, while consistently purifying the air.

This image highlights the diverse environmental pollutants and odors that the filter effectively addresses, improving indoor air quality.

Maintenance

For optimal performance, it is recommended to replace your isinlive HP01 HP02 HEPA Filter every 12 months, or as indicated by your Dyson purifier's filter life monitor. Regular replacement ensures continuous high-efficiency filtration and extends the lifespan of your purifier.

Periodically clean the sensor hatch on your Dyson purifier to ensure accurate air quality readings.

Specifications

Warranty and Support

isinlive manufactured Advanced Filters come with a product assurance. If you are not satisfied with your purchase, a new pack of Dyson 968125-03 filters will be re-shipped. For further support or inquiries, please refer to the contact information provided with your product packaging or visit the official isinlive store.

Official Store: Visit the isinlive Store on Amazon

Climate Pledge Friendly

This product is certified as Climate Pledge Friendly by Amazon, indicating its commitment to sustainability. This includes features such as:

• Recycled materials
• Safer chemicals
• Worker well-being
• Less packaging
• Less air in container
• More efficient shape
• Waterless technology

This image highlights the 'Compact by Design' certification, part of the Climate Pledge Friendly initiative.