Elink URC-386 Universal 9-in-1 Remote Control Instruction Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Elink URC-386 Universal 9-in-1 Remote Control. Please read this manual thoroughly before using the remote control to ensure proper functionality and to maximize your user experience.

2. Product Overview

The Elink URC-386 is a versatile universal remote control designed to operate up to nine different audio/video devices. It features a comprehensive code library, ensuring compatibility with most major brands of televisions, VCRs, DVDs, cable boxes, satellite receivers, CD players, AUX devices, and VCDE players.

2.1 Remote Control Layout

Familiarize yourself with the buttons and their functions on your Elink URC-386 remote control.

Image 1: Front view of the Elink URC-386 Universal Remote Control. Key buttons include POWER, TV1/TV2/CBL/DVD/AUX/SAT device selectors, CH+/CH- (Channel Up/Down), VOL+/VOL- (Volume Up/Down), SET for programming, number pad (0-9), and various playback controls.

3. Battery Installation

The Elink URC-386 remote control requires two (2) AAA batteries (not included) for operation. Follow these steps to install the batteries:

1. Locate the battery compartment cover on the back of the remote control.
2. Press down on the latch and slide the cover downwards to open the compartment.
3. Insert two new AAA batteries, ensuring that the positive (+) and negative (-) terminals match the diagrams inside the compartment.
4. Slide the battery compartment cover back into place until it clicks securely.

Note: Always replace both batteries at the same time. Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote will not be used for an extended period.

4. Setup and Code Programming

To control your devices, the Elink URC-386 remote must be programmed with the correct codes for each device. The remote contains a complete code library for most major brands.

4.1 Manual Code Entry (Recommended)

This method allows you to directly enter a 3-digit code for your specific device brand.

1. Turn on the device you wish to program (e.g., TV, DVD player).
2. On the remote, press and hold the SET button. While holding SET, press the corresponding device button (e.g., TV1, DVD, CBL) for the device you are programming. The red indicator light on the remote will illuminate.
3. Release both buttons. The red indicator light will remain lit.
4. Enter the 3-digit code for your device brand using the number pad. (Refer to the separate code list provided with your remote for specific codes).
5. After entering the last digit, the red indicator light should turn off. If it flashes and stays on, the code was not accepted, or it is an invalid code. Repeat the process.
6. Test the remote by pressing the POWER button. If the device turns off, try other functions like volume or channel. If it works, the programming is complete.
7. If the device does not respond or only some functions work, repeat the process with the next code listed for your brand.

4.2 Auto Code Search

If you cannot find a code for your device, or if manual entry is unsuccessful, you can use the auto code search function.

1. Turn on the device you wish to program.
2. On the remote, press and hold the SET button. While holding SET, press the corresponding device button (e.g., TV1, DVD, CBL). The red indicator light will illuminate.
3. Release both buttons. The red indicator light will remain lit.
4. Press the POWER button once. The red indicator light will start flashing, indicating the remote is searching for a code.
5. Point the remote at your device. When your device turns off, immediately press the SET button to save the code. The red indicator light will turn off.
6. Test the remote's functions. If not all functions work, repeat the auto search process. The remote will continue searching from the last found code.

5. Operating Instructions

Once programmed, your Elink URC-386 remote control can operate your devices. Ensure there is a clear line of sight between the remote's infrared emitter and your device's receiver.

• Device Selection: Press the desired device button (e.g., TV1, DVD, CBL) to select the device you wish to control. The red indicator light will flash once to confirm selection.
• Power On/Off: Press the POWER button to turn the selected device on or off.
• Volume Control: Use the VOL+ and VOL- buttons to adjust the volume.
• Channel Control: Use the CH+ and CH- buttons to change channels.
• Number Pad: Use the number buttons (0-9) to directly enter channel numbers or other numerical inputs.
• Mute: Press the MUTE button to silence the audio. Press again to restore.
• Input/Source: Use the INPUT or SOURCE button (if available and programmed) to switch between different video inputs on your TV.
• Playback Controls: For VCR/DVD devices, use buttons like PLAY, PAUSE, STOP, REW, FF, REC (if available and programmed).

6. Maintenance

To ensure the longevity and optimal performance of your Elink URC-386 remote control, follow these simple maintenance guidelines:

• Cleaning: Wipe the remote control regularly with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution, then wipe dry immediately. Avoid using abrasive cleaners or solvents.
• Battery Replacement: Replace batteries promptly when the remote's performance degrades or if the indicator light does not illuminate. Always use fresh AAA batteries.
• Storage: Store the remote in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Avoid Drops: Protect the remote from physical impact, as drops can damage internal components.

7. Troubleshooting

If you encounter issues with your Elink URC-386 remote control, refer to the following common problems and solutions:

• Remote not working at all:
  • Check if the batteries are inserted correctly with the correct polarity (+/-).
  • Replace old batteries with new AAA batteries.
  • Ensure there is a clear line of sight between the remote and the device.
• Device not responding to commands:
  • Verify that the correct device button (e.g., TV1, DVD) has been selected.
  • Re-program the remote control for the specific device using the manual code entry or auto code search method. Try different codes for your brand if available.
  • Ensure the device is powered on.
• Only some functions work:
  • The programmed code may be a partial match. Try programming the remote again using a different code for your device brand.
  • Some advanced functions may not be supported by all universal remote codes.
• Indicator light does not illuminate during programming:
  • Ensure you are pressing and holding the SET button correctly before pressing the device button.
  • Check or replace batteries.

8. Specifications

• Brand: Elink
• Model: URC-386
• Type: Universal Remote Control
• Number of Devices: 9-in-1 (TV, VCR, DVD, Cable, Satellite, CD/AUX, VCDE)
• Power Source: 2 x AAA Batteries (not included)
• Special Features: Infrared, Pre-Programmed, Universal Code Library
• Color: Gray (as per product image)

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or contact your retailer. Elink provides support for its products, and specific details regarding warranty periods and service procedures can be found through official channels.