Introduction
The INCHOR Cable Organizers are designed to help you manage and secure various cables, preventing tangles and fraying. Made from high-quality, eco-friendly silicone, these adhesive clips are suitable for use in diverse environments such as your car, home, or office. This manual provides detailed instructions for optimal use of your 5-slot and 3-slot cable organizers.
Image: INCHOR 5-slot and 3-slot cable organizers, showcasing their design and function on a wooden desk, holding USB-C, Lightning, and USB-A cables neatly in place.
Product Features
- Cable Management: Effectively prevents phone charging cables, USB cables, network cables, and TV power cords from excessive bending, tangling, and fraying.
- Strong Adhesive: Equipped with a strong 3M adhesive pad for secure attachment to smooth, clean surfaces like glass, plastic, metal, wood tables, desks, and walls.
- Durable Material: Constructed from high-quality, eco-friendly, and flexible silicone material, allowing for easy cable insertion and removal.
- Versatile Use: Suitable for wires with a diameter up to 0.26 inches (6mm). Can also function as a pen holder, toothbrush holder, or floss holder.
Setup Instructions
- Prepare the Surface: Ensure the surface where you intend to place the cable organizer is clean, smooth, oil-free, dust-free, and water-free. Use a clean cloth to wipe the area thoroughly.
- Peel the Adhesive: Carefully peel off the protective film from the 3M adhesive pad on the back of the cable organizer.
- Position and Press: Firmly press the cable organizer onto the desired clean surface. Apply consistent pressure for a few seconds to ensure strong adhesion.
- Allow to Set: For optimal adhesion, allow the organizer to set for at least several hours before inserting cables. A 24-hour waiting period is recommended for maximum strength.
Image: A visual guide demonstrating the simple four-step installation process: cleaning the surface, peeling the 3M adhesive, pressing the organizer into place, and the final setup with cables.
Operating Instructions
- Inserting Cables: Gently push your desired cable into one of the slots. The flexible silicone material will secure the cable in place.
- Removing Cables: To remove a cable, gently pull it out from the slot. The design allows for easy removal without damaging the cable.
- Adjusting Cable Length: The flexible design allows you to pull cables through the slots to adjust their length as needed, keeping excess slack managed.
Image: Examples of the cable organizers in use, demonstrating their versatility on a bedside table, an office desk, and a car dashboard, effectively managing charging cables.
Maintenance
To maintain the effectiveness and appearance of your INCHOR Cable Organizers, wipe them periodically with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the silicone material or the adhesive.
Troubleshooting
- Organizer Not Sticking: Ensure the surface was thoroughly cleaned and dry before application. Re-apply to a new, clean surface if necessary, allowing 24 hours for the adhesive to fully cure.
- Cables Not Holding Securely: Verify that the cable diameter is within the recommended 0.26 inch (6mm) limit. Very thin cables may not be held as firmly.
Specifications
| Brand | INCHOR |
| Material | Silicone |
| Color | Black (also available in Clear, Multi, White) |
| Product Dimensions (Package) | 6.9"L x 3.8"W x 0.04"H; 1.41 ounces |
| Cable Diameter Compatibility | Up to 0.26 inches (6mm) |
| Adhesive Type | 3M PE Foam |
Warranty and Support
For information regarding product warranty or support, please refer to the product packaging or contact INCHOR customer service directly. Details may also be available on the official INCHOR website.