Autel Robotics EVO II 8K Drone Camera Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Autel Robotics EVO II 8K Drone Camera. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage or injury.

The Autel Robotics EVO II is a portable, folding aircraft designed for capturing high-quality aerial imagery. It features an 8K camera capable of recording Ultra HD video and 48-megapixel photos, offering advanced flight capabilities and intelligent features.

Figure 1.1: Autel Robotics EVO II 8K Drone Camera with included accessories.

Figure 1.2: Overview of the Autel Robotics EVO II Pro V3 camera system.

2. Package Contents

Verify that all items listed below are present in your package:

• EVO II Pro V3 Drone x1
• Battery x2
• Propeller x5 pair
• Gimbal Cover x1
• Remote Controller x1
• Battery Charger & Power Cable x1
• RC Charger x1
• RC Charging Cable x1
• RC Lanyard x1
• Spare Control Stick x1 (pair)
• Landing Pad x1
• Custom Lens Wipe x1
• Protector Case x1
• Manuals

3. Setup

3.1. Battery Charging

Before first use, fully charge both the aircraft battery and the remote controller battery using the provided chargers and cables. Ensure the batteries are securely connected and the charging indicators show a full charge before proceeding.

3.2. Propeller Installation

Attach the propellers to the corresponding motor shafts. Match the propeller type (indicated by a mark) to the motor with the same mark. Press down and twist to secure. Ensure all propellers are firmly attached before flight.

3.3. Gimbal Cover Removal

Always remove the gimbal cover before powering on the aircraft. Failure to do so may damage the gimbal mechanism.

3.4. Remote Controller Setup

Mount your mobile device onto the remote controller holder. Connect your mobile device to the remote controller using the appropriate cable. Power on the remote controller and launch the Autel Sky app.

3.5. First Power On

1. Press and hold the power button on the aircraft until the indicator lights illuminate.
2. Press and hold the power button on the remote controller until it powers on.
3. Follow the on-screen instructions in the Autel Sky app for initial setup and calibration.

4. Operating Instructions

4.1. Pre-Flight Checklist

• Ensure aircraft and remote controller batteries are fully charged.
• Verify propellers are correctly installed and free from damage.
• Remove the gimbal cover.
• Check the flight environment for obstacles, restricted airspace, and weather conditions.
• Confirm GPS signal strength and compass calibration are complete.

4.2. Basic Flight Controls

Familiarize yourself with the remote controller's stick movements for basic flight maneuvers:

• Left Stick (Throttle/Yaw): Up/Down for altitude, Left/Right for rotation.
• Right Stick (Pitch/Roll): Up/Down for forward/backward movement, Left/Right for left/right movement.

4.3. Camera Operation

The EVO II features an advanced camera system for capturing high-quality visuals:

• Video Resolution: Supports up to 8K video capture format, with the EVO II Pro V3 supporting up to 6K video.
• Photo Resolution: Captures 48-megapixel photos.
• Adjustable Aperture: F/2.8-F/11 for control over depth of field and exposure.
• Zoom Capability: 3x optical (lossless) and 16x digital zoom.
• Low Light Performance: Equipped with Moonlight Algorithm 2.0, allowing ISO up to 44000 for night photography.
• Image Quality: Supports 12-Bit DNG photos for enhanced post-production flexibility.

Figure 4.1: Details of the EVO II Pro V3 camera's image quality features.

Figure 4.2: Enhanced low-light and high dynamic range capabilities.

4.4. Intelligent Flight Features

The EVO II incorporates several features to enhance flight safety and ease of use:

• Omnidirectional Obstacle Avoidance: Equipped with 12 visual sensors and 19 groups of sensors, providing 360° obstacle avoidance for safe navigation through complex environments.
• Return to Home (RTH): Automatically returns the aircraft to its takeoff point if signal is lost or battery is low.
• Auto Follow, Auto-Landing, One Button Return: Automated flight modes for convenience.
• Extended Flight Time: Up to 40 minutes of flight time.
• Wind Resistance: Maximum wind resistance of 27 mph (12 m/s).

Figure 4.3: Visual representation of the drone's 360° obstacle avoidance system.

Figure 4.4: Key advanced flight features of the EVO II drone.

4.5. SkyLink 2.0 Video Transmission

The EVO II Pro V3 utilizes Autel's SkyLink 2.0 technology for robust video transmission:

• Transmission Range: Up to 15 km (9.3 miles) away.
• Image Quality: Up to 2.7K image quality.
• Frequency Bands: Supports 2.4GHz / 5.8GHz / 900MHz tri-band communication.
• Anti-Interference: Automatic frequency hopping for maximum anti-interference capability.

Figure 4.5: SkyLink 2.0 video transmission in action with the Smart Controller SE.

4.6. Smart Controller SE

The EVO II Pro V3 is paired with the Autel Smart Controller SE, offering enhanced control and display features:

• Display: 6.4-inch OLED touch screen.
• Processor: Latest generation 8-core processor for HD image transmission.
• Connectivity: Enhances anti-interference abilities with triple band frequency hopping.
• Operating System: Customized Android system for flexibility with third-party applications.
• Durability: IP43 rating ensures all-weather performance.

4.7. Autel Explorer for Mapping

The Autel Explorer app provides advanced mapping capabilities:

• Flight Profiles Save: Save and reuse flight profiles for repeatable missions.
• Photo Replication: Duplicate previous shooting parameters for consistent results.
• Multi-Battery Missions: Create and save multiple NTRIP profiles for different locations.
• Advanced Feature Sets: Includes options to create rectangular or polygon missions, support double grid mapping, manual control over camera settings, non-stop turning on corners, and customizable course headings.

Figure 4.6: Autel Explorer app interface for advanced mapping functions.

5. Maintenance

5.1. Cleaning

• Regularly clean the drone body with a soft, dry cloth.
• Use the provided lens wipe or a microfiber cloth to clean the camera lens and vision sensors. Avoid abrasive materials.

5.2. Battery Care

• Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
• Do not overcharge or over-discharge batteries.
• If storing for extended periods, discharge batteries to approximately 50-60% capacity.

5.3. Propeller Inspection

Before each flight, inspect all propellers for cracks, bends, or other damage. Replace any damaged propellers immediately to ensure safe flight.

5.4. Firmware Updates

Periodically check for and install the latest firmware updates for both the aircraft and the remote controller. Firmware updates often include performance improvements, new features, and bug fixes.

6. Troubleshooting

• No Power: Ensure batteries are fully charged and correctly inserted. Check power button sequence.
• Signal Loss: Fly within the specified transmission range. Avoid areas with high electromagnetic interference. Ensure antennas on the remote controller are properly oriented.
• Poor Image/Video Quality: Clean the camera lens. Adjust camera settings (ISO, aperture, shutter speed) for current lighting conditions. Ensure the gimbal is stable.
• Obstacle Avoidance Warnings: Understand that obstacle avoidance has limitations and may not function optimally in certain lighting conditions (e.g., direct sunlight, very dark environments) or with thin objects like wires. Always maintain visual line of sight.
• Flight Instability: Perform IMU and compass calibrations as instructed in the app. Check for damaged propellers.

7. Specifications

8. Warranty and Support

Autel Robotics products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Autel Robotics website. For technical support, troubleshooting assistance, or service inquiries, please contact Autel Robotics customer support through their official channels.