Alphasonik ABM80 DYNAMIS Series Mid-Range Car Audio Speaker Instruction Manual

1. Introduction

Thank you for choosing the Alphasonik ABM80 DYNAMIS Series Mid-Range Car Audio Speakers. These speakers are engineered to deliver powerful and clear audio performance in your vehicle. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.

Please read this manual thoroughly before attempting installation or operation. Keep this manual for future reference.

2. What's in the Box

Verify that all components listed below are included in your package:

• (2) ABM80 Mid Range Speakers
• (2) Speaker Wires
• (8) Screws
• (8) Speed Clips
• (1) Operations Manual (this document)

Figure 2.1: Contents of the Alphasonik ABM80 package, showing two speakers.

3. Key Features

• High Power Handling: 800 Watts MAX / 200 Watts RMS for robust sound output.
• Optimized Frequency Response: 100Hz - 18kHz for clear mid-range audio.
• Efficient Design: Sensitivity of 107dB and 4-Ohm Impedance.
• Durable Construction: Reinforced Injection Molded ABS Basket.
• Quality Cone Material: Non Pressed Paper Cone with Cloth Accordion Surround.
• Advanced Cooling: Billet Aluminum Phase Plug acts as an additional cooling system, threading directly into the motor system for even sound dispersion.
• Powerful Magnet: 48 Oz. Ferrite Magnet for strong performance.

Figure 3.1: Alphasonik ABM80 speaker with grille.

4. Technical Specifications

5. Installation Guide

Proper installation is crucial for the performance and longevity of your Alphasonik ABM80 speakers. If you are not familiar with car audio wiring and installation, it is highly recommended to seek professional installation services.

5.1. Safety Precautions

• Disconnect the vehicle's battery before starting any electrical work to prevent short circuits.
• Wear appropriate safety gear, including eye protection.
• Ensure all wiring is properly insulated and secured to prevent damage or interference.
• Do not mount speakers in locations that obstruct vehicle operation or safety features.

5.2. Mounting the Speakers

1. Choose Location: Select a suitable mounting location in your vehicle (e.g., door panels, rear deck) that accommodates the speaker's 8-inch overall diameter and 3.46-inch mounting depth. Ensure there is sufficient clearance behind the mounting surface.
2. Prepare Opening: If replacing existing speakers, remove the old speakers. If creating a new opening, carefully cut a circular hole with a diameter of 7.87 inches (200mm). Use a template if necessary.
3. Secure Speaker: Place the speaker into the opening. Align the mounting holes on the speaker frame with the pre-drilled holes or mark new ones. Use the provided screws and speed clips to securely fasten the speaker to the mounting surface. Do not overtighten.

Figure 5.1: Alphasonik ABM80 speaker cone and surround.

5.3. Wiring Connections

The ABM80 speakers have a 4-Ohm impedance. Ensure your amplifier or head unit is stable at this impedance. Use the provided speaker wires or high-quality speaker wire of appropriate gauge for your power levels.

1. Identify Terminals: Locate the positive (+) and negative (-) terminals on the back of each speaker. These are typically marked.
2. Connect Wires: Connect the positive (+) terminal of the speaker to the positive (+) output of your amplifier/head unit. Connect the negative (-) terminal of the speaker to the negative (-) output of your amplifier/head unit. Maintain correct polarity for optimal sound.
3. Secure Connections: Ensure all connections are tight and free from frayed wires that could cause short circuits. Use crimp connectors or solder for reliable connections.
4. Route Wires: Route speaker wires away from sharp edges, moving parts, and sources of electrical interference. Secure them with cable ties or clips.

Figure 5.2: Rear view of Alphasonik ABM80 showing wiring terminals.

6. Operating Instructions

Once installed, your Alphasonik ABM80 speakers are ready for use. Follow these guidelines for optimal performance:

• Power On: Turn on your car audio system. Start with the volume at a low level.
• Volume Adjustment: Gradually increase the volume to your desired listening level. Avoid pushing the speakers beyond their rated power handling (200 Watts RMS) to prevent distortion and damage.
• Equalizer Settings: Adjust your head unit's or amplifier's equalizer settings to fine-tune the sound. The ABM80 speakers are designed for mid-range frequencies, so ensure appropriate crossover settings if using a dedicated amplifier with crossover capabilities.
• Break-in Period: Allow a break-in period of approximately 10-20 hours of normal listening before playing the speakers at very high volumes. This allows the speaker's suspension components to loosen up and perform optimally.

7. Care and Maintenance

To ensure the longevity and continued performance of your Alphasonik ABM80 speakers, follow these simple maintenance tips:

• Cleaning: Use a soft, dry cloth to wipe down the speaker grilles and frames. Avoid using harsh chemicals or abrasive cleaners.
• Inspection: Periodically inspect the speaker cones and surrounds for any signs of damage, tears, or deterioration. Check wiring connections for tightness.
• Environmental Factors: Protect speakers from excessive moisture, direct sunlight, and extreme temperatures, which can degrade materials over time.
• Avoid Overpowering: Continuously playing speakers at distorted levels or exceeding their RMS power rating can lead to permanent damage.

8. Troubleshooting

If you experience issues with your Alphasonik ABM80 speakers, refer to the following common problems and solutions:

9. Warranty and Support

Alphasonik products come with a Limited Warranty. Please refer to the warranty card included with your product or visit the official Alphasonik website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Alphasonik customer service through their official website or the contact information provided on your purchase receipt.

Alphasonik Official Website: www.alphasonik.com