Introduction
This manual provides essential instructions for the safe and effective use of your Versativ UV-C PRO Portable Sanitizing Wand. Please read this manual thoroughly before operating the device and retain it for future reference. The Versativ UV-C PRO is designed for surface disinfection using UV-C light technology.
Important Safety Information
WARNING: UV light hazard. Avoid looking directly at the light.
Handle the Versativ UV-C PRO with extreme caution. Avoid direct UV-C light exposure to the eyes, open wounds, and skin. This device is intended for disinfecting surfaces only. Failure to adhere to these warnings may result in temporary or permanent eye damage and skin irritation or cancer.
The device features an advanced Gravity Sensing Auto-off Safety Feature to limit accidental direct UV-C light exposure to eyes and skin. When the wand is tilted upwards, the UV-C light will automatically turn off.
This image highlights the advanced safety features of the UV-C PRO wand, specifically the gravity sensing auto-off mechanism that prevents direct exposure to eyes and skin by shutting off when tilted upwards.
Setup
- Unpacking: Carefully remove the Versativ UV-C PRO wand from its packaging. Inspect for any damage.
- Initial Charge: The device includes a Lithium Ion battery. Before first use, fully charge the wand using the provided USB charging cable. Connect the cable to the charging port on the wand and a suitable USB power source. The charging indicator light will show the charging status.
- Folding Mechanism: The wand features a folding design for portability. Gently unfold the wand until it locks into the open position before use.
This image shows the Versativ UV-C PRO sanitizing wand in a user's hand, highlighting its compact and portable form factor, ready for use.
Operating Instructions
- Power On: Press and hold the power button to turn on the UV-C PRO wand. The UV-C lights will illuminate.
- Surface Disinfection: Hold the wand 2-3 cm (approximately 1 inch) away from the surface you wish to disinfect. Move the wand in a slow, swiping motion over the entire surface.
- Exposure Time: For effective disinfection, ensure a minimum exposure time of 10 seconds per area. An optimum sterilization time of 40 seconds is highly recommended for thorough sanitization.
- Safety Feature: Remember the gravity sensing auto-off feature. Keep the wand angled downwards towards the surface during operation to maintain UV-C light emission.
- Power Off: Press and hold the power button again to turn off the UV-C PRO wand.
This image illustrates the Versativ UV-C PRO wand in action, sanitizing everyday items like personal belongings and shopping cart handles, showcasing its versatility.
The image demonstrates the broad application of the Versativ UV-C PRO wand for disinfection in various environments, including children's areas, packages, public spaces, and vehicle interiors.
Maintenance
- Cleaning: Ensure the device is turned off and unplugged before cleaning. Wipe the exterior of the wand with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device or its UV-C LEDs.
- Storage: Store the Versativ UV-C PRO wand in a cool, dry place away from direct sunlight and extreme temperatures. Keep it folded to protect the UV-C LEDs when not in use.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device regularly, even if not in constant use.
Troubleshooting
- Device Not Turning On: Ensure the battery is charged. Connect the wand to a power source using the USB cable and allow it to charge for at least 30 minutes before attempting to power it on again.
- UV-C Lights Not Illuminating: Check if the wand is fully unfolded and angled downwards. The gravity sensing auto-off feature will prevent the lights from turning on if the wand is tilted upwards.
- Reduced Disinfection Effectiveness: Ensure the wand is held at the recommended distance (2-3 cm) from the surface and that the exposure time is sufficient (10-40 seconds). Clean the UV-C LED surface if there is any visible debris.
Specifications
This image provides a comprehensive list of the Versativ UV-C PRO's technical specifications, including input power, LED lights, wattage, UV-C LED life, product size, weight, battery type, capacity, sterilization distance, time, and peak wavelength.
| Feature | Specification |
|---|---|
| Brand | VersativTECH |
| Model Name | UV-C PRO |
| Item Model Number | OMVT-UVCP-WH1 |
| UPC | 617270061510 |
| Power Source | Corded Electric (for charging) |
| Wattage | 100 Watts |
| Material | Plastic |
| Item Weight | 181 g (0.4 Pounds) |
| Product Dimensions (LxWxH) | 23.88 x 4.83 x 4.06 cm |
| Batteries | 1 Lithium Ion battery (included) |
| Sterilization Distance | 2-3 cm |
| Sterilization Time | 10-40 seconds or more |
| UV-C LED Peak Wavelength | 260 - 280 nm |
Warranty and Support
For warranty information, please refer to the documentation included with your purchase or visit the manufacturer's official website. VersativTECH is committed to providing quality products and customer support.
Contact Information:
- Website: www.VersativTECH.com
- Email Support: HereForYou@VersativTECH.com