Bandai Hobby Digimon Black Wargreymon (Amplified) Figure-Rise Standard Model Kit Instruction Manual

Introduction

This instruction manual provides detailed guidance for assembling and maintaining your Bandai Hobby Digimon Black Wargreymon (Amplified) Figure-Rise Standard Model Kit. This kit allows you to reproduce the ultimate Dark Tower Digimon with silver and gold molding colors and black accents. It features an original gimmick on the wings that can be connected to the back, allowing them to expand like a wing for dynamic display. Wing parts are also removable and can be replaced on the arm. New effect parts are included to recreate in-show imagery.

Safety Information

Warning: Product contains small parts considered to be a choking hazard. Keep out of reach of small children. Recommended for ages 15 years and up.

Always handle model kit parts with care. Avoid applying excessive force during assembly to prevent breakage. Use appropriate tools such as hobby nippers and tweezers for precise assembly and sticker application.

What's in the Box

• Dramon Killer x2
• Wing parts set x1
• Effect parts x2
• Foil seal x1
• Instruction Manual (this document)

Assembly Instructions

The Black Wargreymon (Amplified) model kit is designed for straightforward assembly, typically taking a few hours. Follow the detailed diagrams provided in the physical instruction booklet included with your kit. Below are general steps and tips for a successful build:

1. Preparation: Carefully remove parts from the runners using hobby nippers to ensure clean cuts and prevent stress marks. Smooth any rough edges with a hobby knife or file if necessary.
2. Main Body Assembly: Begin by assembling the torso, head, and waist sections. Pay close attention to the orientation of parts, especially the waist connector, ensuring the tapered part is pointing upwards.
3. Limb Assembly: Assemble the arms and legs, connecting the various segments. The kit features good articulation, so ensure joints move smoothly after assembly.
4. Wing Assembly: Attach the wing parts to the back. The kit's original gimmick allows the wings to expand. Familiarize yourself with this mechanism during assembly.
5. Accessory Attachment: Assemble and attach the Dramon Killer weapons and effect parts as desired.
6. Sticker Application: The kit includes foil seals for details such as the red 'X' marks on the chest and various gold accents. Use fine-tipped tweezers for precise application, as some stickers are small and require patience. Apply stickers carefully to avoid tearing or misplacement.

Image: General model kit assembly process.

Display and Posing

The Black Wargreymon (Amplified) model boasts significant articulation, allowing for a wide range of dynamic poses. The expanding wing mechanism adds to its display versatility. Experiment with different arm and wing configurations to achieve your desired look.

Image: Black Wargreymon in a dynamic action pose, showcasing its articulation and effect parts.

Image: Rear view of the model, highlighting the expanded wing feature.

Posing Tip: Due to its design, the model can be somewhat top-heavy. For more stable and dynamic aerial poses, consider using a dedicated flight stand (sold separately). This will help maintain balance and prevent accidental falls.

Maintenance

To keep your Black Wargreymon model kit in optimal condition:

• Cleaning: Gently dust the model regularly with a soft brush or compressed air to prevent dust buildup. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
• Handling: Handle the model by its main body parts rather than delicate accessories or thin protrusions to avoid accidental breakage.

Troubleshooting

• Sticker Application Difficulty: If you find stickers difficult to apply, ensure the surface is clean and dry. Use fine-tipped tweezers to position them accurately. A small amount of water can sometimes help reposition stickers before they fully adhere.
• Loose Joints: If any joints become loose over time, a thin layer of clear nail polish or hobby cement applied to the peg (and allowed to dry before reassembly) can increase friction.
• Stability Issues: If the model struggles to stand in certain poses, adjust its center of gravity. As mentioned, a display stand can significantly improve stability for dynamic poses.

Specifications

Warranty and Support

Official Bandai Namco products, including this model kit, come with an affixed label. This label serves as proof that you are purchasing an officially licensed Bandai product, distributed by its sole and authorized distributor (Bluefin) for the U.S. Markets. This ensures compliance with North American consumer product safety regulations and eligibility for product support within the United States.

For product support assistance, please refer to the contact information provided on the Bluefin / Bandai Namco warning label on your product box.