BOSCH BC1724 QuietCast Premium Ceramic Disc Brake Pad Set User Manual

1. Introduction

This manual provides essential information for the proper installation and maintenance of your BOSCH BC1724 QuietCast Premium Ceramic Disc Brake Pad Set. These brake pads are engineered for OE quality performance, durability, and quiet operation with low dust.

2. Product Components and Features

Each BOSCH BC1724 QuietCast Premium Ceramic Disc Brake Pad Set includes components for one axle (two wheels). The set typically contains:

• Ceramic Brake Pads: Engineered for robust performance, exceptional stopping power, and quiet, low-dust operation.
• Hardware Kit: (Where available) Includes necessary clips and springs for installation.
• Synthetic Lubricant: For reduced resistance on sliding contact points.

Key features of these brake pads include:

• Molded Shim Technology (MST): Features pre-attached OE style multilayer rubber core shims for lower noise, increased strength, and corrosion resistance.
• Powder-Coated Backing Plates: Prevents rust and corrosion, extending product life.
• OE Style Slots and Chamfers: Ensures premium quality, fit, and function.

Image 1: Overview of the BOSCH BC1724 QuietCast Premium Ceramic Disc Brake Pad Set, showing four brake pads, various hardware clips, and a packet of synthetic lubricant.

Image 2: Close-up view of the BOSCH BC1724 brake pads, hardware, and lubricant, highlighting the ceramic friction material and backing plates.

3. Vehicle Compatibility

The BOSCH BC1724 QuietCast Premium Ceramic Disc Brake Pad Set is designed for the REAR axle of select vehicles. Please verify specific vehicle fitment details as trim level or engine type may affect compatibility.

Compatible with:

• ACURA: 2014-2016 MDX
• HONDA: 2019-2023 Passport, 2016-2022 Pilot, 2017-2023 Ridgeline

Always consult your vehicle's service manual or a professional mechanic to confirm correct part fitment before installation.

4. Installation Instructions

Warning: Brake system work requires specialized knowledge and tools. Improper installation can lead to brake failure, serious injury, or death. It is highly recommended that installation be performed by a qualified professional mechanic.

This section provides a general overview. Refer to your vehicle's specific service manual for detailed, step-by-step instructions.

1. Preparation:
   • Ensure the vehicle is safely lifted and supported on jack stands.
   • Remove the wheel.
   • Locate the brake caliper and rotor assembly.
2. Removal of Old Pads:
   • Carefully remove the caliper bolts and lift the caliper off the rotor.
   • Remove the old brake pads and any existing hardware.
   • Inspect the brake rotor for wear, scoring, or damage. Replace or resurface if necessary.
   • Clean the caliper and caliper bracket thoroughly, removing any rust or debris.
3. Installation of New Pads:
   • Install new hardware clips (if provided) onto the caliper bracket.
   • Apply a thin layer of the provided synthetic lubricant to the sliding contact points of the new pads and hardware. Avoid getting lubricant on the friction material.
   • Insert the new BOSCH QuietCast ceramic brake pads into the caliper bracket. Ensure they fit securely and can slide freely.
   • Carefully compress the caliper piston(s) using an appropriate tool to create space for the new, thicker pads.
   • Reinstall the caliper over the new pads and rotor, ensuring proper alignment.
   • Tighten caliper bolts to the manufacturer's specified torque.
4. Post-Installation:
   • Reinstall the wheel and lower the vehicle.
   • Before driving, pump the brake pedal several times until a firm pedal feel is achieved. This will seat the caliper pistons against the new pads.
   • Perform a proper brake "bed-in" procedure as recommended by Bosch or your vehicle manufacturer to optimize performance and longevity. This typically involves a series of moderate stops from varying speeds.

5. Maintenance

Regular inspection and maintenance of your brake system are crucial for safety and performance.

• Routine Inspection: Inspect brake pads, rotors, calipers, and brake fluid levels at least once a year or every 12,000 miles (20,000 km), or as recommended by your vehicle manufacturer.
• Pad Wear: Replace brake pads when the friction material wears down to the minimum thickness specified by the manufacturer, typically around 2-3mm.
• Rotor Condition: Check rotors for excessive wear, deep grooves, cracks, or warping. Replace rotors if they are below minimum thickness or severely damaged.
• Brake Fluid: Ensure brake fluid is at the correct level and is clean. Contaminated or low brake fluid can compromise braking performance.
• Noise: If you hear squealing, grinding, or other unusual noises from your brakes, have them inspected immediately by a qualified mechanic.

6. Troubleshooting Common Issues

If you experience any persistent brake issues, consult a certified mechanic immediately.

7. Product Specifications

• Brand: Bosch
• Model Number: BC1724
• Material: Ceramic
• Auto Part Position: Rear
• Vehicle Service Type: Automotive
• Specification Met: OEM
• Item Weight: Approximately 2 pounds
• Product Dimensions: Approximately 8.5 x 9.5 x 3.25 inches
• UPC: 077212213207

8. Warranty and Support

For warranty information and customer support regarding your BOSCH BC1724 QuietCast Premium Ceramic Disc Brake Pad Set, please refer to the official Bosch Automotive website or contact Bosch customer service directly. Keep your purchase receipt as proof of purchase.

Online Resources: Bosch Auto Parts Official Website