1. Product Overview
This manual provides instructions for the Senville 42-inch Oscillating Tower Fan, Model SENTF-19JRA. This appliance is designed to provide cooling airflow in indoor environments.
Key Features:
- Adjustable Height: The fan's height can be adjusted from 36 inches to 42 inches.
- Remote Control: Includes a remote for convenient operation.
- Timer Function: Features a built-in timer for scheduled operation.
- Multiple Speed Settings: Offers 3 fan speed settings.
- Oscillation: Provides wide oscillation for broad air distribution.
2. Important Safety Instructions
Read all instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
General Safety Precautions:
- Always unplug the fan before cleaning, servicing, or relocating.
- Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
- Keep children and pets away from the fan during operation.
- Do not insert fingers or other objects through the grille when the fan is operating.
- Place the fan on a stable, level surface to prevent tipping.
- Do not use the fan in wet or damp locations, such as bathrooms.
- Ensure the power supply matches the voltage specified on the fan's rating label (110 Volts).
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
3. Package Contents
Verify that all components are present in the packaging:
- Tower Fan Unit
- Base Plate
- Remote Control (2 AAA batteries not included)
- User Manual
4. Product Components
Figure 4.1: Senville Tower Fan and Remote Control.
Control Panel
Figure 4.2: Top-mounted control panel with touch buttons for various functions.
Remote Control
Figure 4.3: Remote control for convenient operation.
5. Assembly Instructions
Follow these steps to assemble your Senville Tower Fan:
- Carefully remove all components from the packaging.
- Locate the large plastic nut on the bottom of the tower fan unit. Important: This nut must be removed before attaching the base. Twist counter-clockwise to remove.
- Align the tower fan unit with the base plate. Ensure the power cord passes through the center hole of the base plate.
- Secure the base plate to the tower fan unit using the large plastic nut previously removed. Twist clockwise until securely tightened.
- Adjust the fan's height if desired. The fan can be set to either 36 inches or 42 inches. To adjust, gently pull the upper section upwards or push downwards until it clicks into the desired position.
Figure 5.1: Adjustable height mechanism.
6. Operating Instructions
Powering On/Off
- Plug the power cord into a standard 110V AC outlet.
- Press the Power button () on the control panel or remote control to turn the fan on or off.
Fan Speed Settings
The fan has 3 speed settings: Low, Medium, and High.
- Press the Speed button (
) repeatedly to cycle through the speed settings. The LED display will indicate the current speed.
Oscillation Function
The fan can oscillate to distribute air across a wider area.
- Press the Oscillation button () to start or stop the oscillation.
Figure 6.1: Wide 90-degree oscillation for broad coverage.
Timer Function
Set the fan to automatically turn off after a specified period (up to 7 hours).
- Press the Timer button () repeatedly to select the desired operating time in 1-hour increments. The LED display will show the set time.
Eco Mode
The fan features an Eco Mode for energy efficiency.
- Press the Eco Mode button () to activate or deactivate Eco Mode. In this mode, the fan adjusts its speed automatically to optimize energy consumption.
7. Care and Maintenance
Regular cleaning and proper storage will help maintain the fan's performance and extend its lifespan.
Cleaning:
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- Use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles.
- Ensure the fan is completely dry before plugging it back in and operating.
Storage:
- If storing the fan for an extended period, unplug it and clean it thoroughly.
- Store the fan in its original packaging or a protective cover in a cool, dry place.
8. Troubleshooting Guide
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. | Ensure the power cord is securely plugged into a working outlet. Check the circuit breaker. |
| Fan is making unusual noise. | Dust accumulation or loose parts. | Unplug the fan and clean the grilles. Ensure the base is securely attached. If rattling persists, apply a small amount of lubricant (e.g., WD-40) to the top and bottom spinning posts. |
| Remote control is not working. | Dead batteries or obstruction. | Replace the 2 AAA batteries in the remote control. Ensure there are no obstructions between the remote and the fan's sensor. |
| Weak airflow. | Fan speed too low or blocked grilles. | Increase the fan speed setting. Clean any dust or debris from the air intake and exhaust grilles. |
9. Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Senville |
| Model Name | SENTF-19JRA |
| Color | Black |
| Product Dimensions | 7"D x 7"W x 42"H |
| Adjustable Height | 36" to 42" |
| Power Source | AC |
| Voltage | 110 Volts |
| Wattage | 50 watts |
| Number of Speed Levels | 3 |
| Timer | Up to 7 hours |
| Control Method | Remote, Touch Panel |
| Item Weight | 11 pounds (5 Kilograms) |
| Indoor/Outdoor Usage | Indoor |
| Certification | ETL |
10. Warranty Information
The Senville SENTF-19JRA Tower Fan is backed by a 1-year manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For additional protection, extended protection plans may be available for purchase:
- 3-Year Protection Plan
- 4-Year Protection Plan
- Complete Protect (covers multiple eligible purchases)
11. Customer Support
For technical support, warranty inquiries, or assistance with your Senville Tower Fan, please contact Senville customer service. Complimentary technical support is available.
Visit the official Senville website for contact information or refer to your purchase documentation.
Senville Store: Senville Amazon Store
