Amazon Basics 15W Qi Certified Wireless Charging Pad User Manual

Introduction

This manual provides essential information for the safe and efficient operation of your Amazon Basics 15W Qi Certified Wireless Charging Pad. Please read this manual thoroughly before use and retain it for future reference.

The Amazon Basics 15W Qi Certified Wireless Charging Pad is designed to provide efficient wireless charging for a wide range of Qi-compatible devices, including various iPhone, Samsung, and LG models. It features optimized charging speeds and integrated safety protections.

What's in the Box

• Wireless Charging Pad
• 4FT USB-A to C Cable

Image: The wireless charging pad and its accompanying 4-foot USB-A to C cable.

Setup

1. Connect the Charging Pad: Insert the USB-C end of the provided 4FT USB-A to C cable into the charging port on the wireless charging pad.
2. Connect to Power Source: Insert the USB-A end of the cable into a compatible USB power adapter (Note: AC adapter is not included). For optimal performance and fast charging, use a QC 3.0 / PD 3.0 adapter (18W or above).
3. Placement: Place the charging pad on a flat, stable surface, away from direct sunlight or heat sources.

Image: Illustration demonstrating the correct power adapter type (QC 3.0 / PD 3.0, 18W or above) for high-speed charging, contrasting it with an incompatible 5V/1A adapter.

Operating Instructions

1. Initiate Charging: Place your Qi-compatible device centrally on the charging pad. The device should be positioned directly over the center of the pad for effective charging.
2. LED Indicator: The charging pad features a sleep-friendly LED indicator. This light will quietly indicate the charging status without causing disruption, especially in low-light environments.
3. Charging Confirmation: Your device's screen should indicate that it is charging. If not, slightly adjust the position of your device on the pad until charging begins.

Image: A visual guide illustrating the importance of centrally aligning your phone on the charging pad for successful wireless charging.

Charging Modes and Compatibility

The charging pad supports various charging speeds depending on the device and compatible power adapter used:

Image: A detailed chart outlining the four different charging modes (5W, 7.5W, 10W, 15W) and the specific phone models compatible with each speed.

Case Compatibility

The wireless charging pad is designed to charge through most non-metal protective cases up to 5mm thick. For faster charging with iPhones, it is recommended to remove all cases before charging.

Important: Avoid charging with magnetic and metal cases or credit cards on your device, as these will prevent proper operation and charging.

Image: Visual representation of the charging pad's ability to charge through cases up to 5mm thick, along with examples of incompatible items like magnets, grips, credit cards, and metal cases.

Safety Information

This Qi-certified charging pad incorporates intelligent protection technology to ensure a secure charging experience. Safeguards include:

• Over-temperature protection
• Over-voltage protection
• Over-current protection
• Foreign object detection

Always ensure the charging pad is placed on a stable surface and is not covered during use to allow for proper heat dissipation.

Maintenance

• Keep the charging pad clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Do not expose the device to liquids or extreme temperatures.
• Avoid dropping or subjecting the charging pad to strong impacts.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the official Amazon Basics website or contact Amazon customer service directly. You may also find additional resources in the User Manual (PDF) and User Guide (PDF) linked on the product's Amazon page.

• User Manual (PDF)
• User Guide (PDF)