CUB CADET Steel Fender Kit Instruction Manual

1. Product Overview

This document provides instructions for the installation and maintenance of the CUB CADET 19A70062100 Steel Fender Kit, designed for Ultima Series ZT1, ZT2, and ZT3 Zero-Turn Lawn Mowers.

The durable steel fender kit is engineered to add additional protection to your lawn mower, safeguarding against debris and enhancing the machine's robust appearance.

Compatibility: This fender kit is compatible with Cub Cadet ZT Ultima Series models, including ZT1-42E Lithium Ion, ZT1-54P Fab, ZT2-54 Fab, and ZT3-60 Fab. Always refer to your original equipment owner's manual to verify compatibility before installation.

2. What's in the Box

The CUB CADET 19A70062100 Steel Fender Kit includes the following components:

• Two (2) Steel Fenders (Left and Right)
• Mounting Hardware (Bolts, Washers, Nuts)

Image: All components of the Cub Cadet Steel Fender Kit, including the two yellow fenders and the accompanying bolts and nuts.

Image: A close-up view of the three hexagonal bolts and four hexagonal nuts included in the mounting hardware.

3. Safety Information

Always prioritize safety when working with machinery. Read and understand all instructions before beginning installation.

• Ensure the lawn mower is turned off, the engine is cool, and the spark plug wire is disconnected (if applicable) to prevent accidental starting.
• Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
• Work on a flat, stable surface.
• Keep children and pets away from the work area.
• If you are unsure about any step, consult a qualified service technician or refer to your mower's original owner's manual.

4. Installation Guide

This section outlines the steps for installing the steel fender kit on your Cub Cadet Ultima Series Zero-Turn Lawn Mower. While installation is generally straightforward, referring to your mower's specific owner's manual for detailed frame diagrams and attachment points is recommended.

Tools Required (Not Included):

• Wrench set or socket set (sizes may vary, typically 1/2 inch or 13mm for common hardware)
• Gloves
• Safety Glasses

Installation Steps:

1. Prepare the Mower: Park the lawn mower on a level surface. Turn off the engine, remove the ignition key, and disconnect the spark plug wire to prevent accidental starting. Allow the engine and exhaust components to cool down.
2. Identify Mounting Locations: Locate the pre-drilled mounting points on the frame of your Cub Cadet Ultima Series mower, typically near the front wheels. These points are designed to accommodate the fender kit.
3. Position the Fenders: Take one steel fender and align its mounting holes with the corresponding holes on the mower's frame. Ensure you are installing the correct fender (left or right) on the appropriate side. The fenders are designed to fit snugly around the front wheel area.
4. Secure with Hardware: Insert the provided bolts through the fender and frame mounting holes. Secure them with the washers and nuts from the underside. Hand-tighten all hardware initially.
5. Repeat for Second Fender: Follow steps 3 and 4 for the second steel fender on the opposite side of the mower.
6. Final Tightening: Once both fenders are in place and all hardware is hand-tightened, use a wrench or socket to securely tighten all bolts and nuts. Do not overtighten, but ensure they are firm to prevent vibration and loosening during operation.
7. Inspect Installation: Visually inspect both fenders to ensure they are securely mounted, do not interfere with steering or wheel movement, and are properly aligned.

Image: Top-down view of the two steel fenders, showing their shape and mounting tabs, alongside the bolts and nuts.

Image: An angled view of one of the yellow steel fenders, highlighting its curved design and internal bracing for structural integrity.

5. Operating with Fenders

Once installed, the steel fender kit provides enhanced protection during the operation of your zero-turn lawn mower. The fenders are designed to:

• Reduce the amount of grass clippings, dirt, and small debris thrown towards the operator or other parts of the mower.
• Protect sensitive components of the mower from impact with minor obstacles.
• Complement the aesthetic design of your Cub Cadet Ultima Series mower.

No special operating procedures are required after fender installation. Continue to operate your mower according to its original owner's manual.

6. Maintenance

To ensure the longevity and continued effectiveness of your steel fender kit, follow these simple maintenance guidelines:

• Cleaning: Regularly clean the fenders to remove accumulated grass, dirt, and debris. Use a damp cloth or mild detergent if necessary. Avoid abrasive cleaners that could damage the powder-coated finish.
• Inspection: Periodically inspect the fenders for any signs of damage, such as dents, cracks, or chipped paint. Check all mounting hardware for tightness and re-tighten if necessary.
• Corrosion Prevention: If the powder coating is chipped or scratched, touch up the area with appropriate paint to prevent rust and corrosion, especially if the mower is stored outdoors.

7. Troubleshooting

Most issues related to the fender kit are minor and can be resolved with simple checks.

8. Specifications

9. Warranty and Support

For detailed warranty information regarding the CUB CADET 19A70062100 Steel Fender Kit, please refer to the official Cub Cadet website or the original documentation that came with your product. Warranty terms and conditions may vary.

For technical support, replacement parts, or further assistance, please contact Cub Cadet customer service or visit their official website:

Visit the Official CUB CADET Store on Amazon

Always use genuine OEM Cub Cadet parts for optimal performance and to maintain product warranty.