NIFER Power Cord Replacement for Regal Coffee Percolator Urns

1. Important Safety Information

Please read all instructions carefully before using this replacement power cord. Failure to follow these instructions may result in electric shock, fire, or damage to the product or property.

• Electrical Compatibility: Ensure the voltage and amperage ratings of this power cord match the requirements of your Regal Coffee Percolator Urn (K7036 or K7830). This cord is rated for 5A 250V and 10A 125V.
• Proper Connection: Always ensure the power cord is fully and securely inserted into both the percolator and a grounded electrical outlet.
• Avoid Damage: Do not use the power cord if it is damaged, frayed, or has exposed wires. Do not bend, twist, or pull the cord excessively.
• Dry Environment: Use and store the power cord in a dry environment. Do not expose it to water or other liquids.
• Unplug When Not in Use: Always unplug the power cord from the electrical outlet when the percolator is not in use or before cleaning.

2. Product Overview

This NIFER 2-pin power cord is designed as a direct replacement for Regal Coffee Percolator Urn models K7036 and K7830. It provides the necessary electrical connection for your percolator to operate.

Image 2.1: The NIFER 2-pin power cord. The cord features a standard 2-pin connector designed to fit compatible percolator urns. Markings on the connector indicate its electrical ratings: 5A 250V and 10A 125V.

3. Setup Instructions

Follow these steps to correctly connect the replacement power cord to your Regal Coffee Percolator Urn.

1. Ensure Percolator is Off: Before connecting the new power cord, ensure your Regal Coffee Percolator Urn is turned off and completely unplugged from any power source.
2. Locate Power Inlet: Identify the 2-pin power inlet on your percolator urn. This is typically located on the base or side of the unit.
3. Insert Cord: Align the 2-pin connector of the NIFER power cord with the power inlet on the percolator. Gently but firmly push the connector into the inlet until it is fully seated. Do not force the connection.
4. Connect to Outlet: Once the cord is securely connected to the percolator, plug the other end of the power cord into a standard, grounded electrical outlet.
5. Verify Connection: Ensure both ends of the power cord are firmly connected before operating the percolator.

4. Operating Instructions

This power cord facilitates the operation of your Regal Coffee Percolator Urn. Refer to your percolator's original instruction manual for specific operating procedures.

• Once the power cord is securely connected to both the percolator and a power outlet, your percolator is ready for use.
• Turn on your percolator using its integrated power switch or controls.
• Monitor the percolator during operation as per its original instructions.
• After use, turn off the percolator and unplug the power cord from the wall outlet.

5. Maintenance and Care

Proper care of your power cord ensures its longevity and safe operation.

• Cleaning: Disconnect the power cord from both the percolator and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use abrasive cleaners or immerse the cord in water.
• Inspection: Regularly inspect the power cord for any signs of damage, such as cuts, fraying, or discoloration. If damage is observed, discontinue use immediately and replace the cord.
• Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and heat sources. Avoid tightly wrapping the cord, which can cause internal damage.

6. Troubleshooting

If your percolator is not powering on after connecting the new cord, consider the following:

• Check Connections: Ensure the power cord is fully and securely plugged into both the percolator and the electrical outlet.
• Test Outlet: Plug another appliance into the same electrical outlet to confirm the outlet is functioning correctly.
• Inspect Cord: Visually inspect the power cord for any visible damage. If damaged, do not use it.
• Percolator Issue: If the cord and outlet are confirmed to be working, the issue may lie with the percolator itself. Refer to your percolator's original troubleshooting guide or contact the percolator manufacturer.

7. Specifications

8. Warranty and Support

For warranty information regarding this NIFER power cord, please refer to the seller or the product packaging. For support related to your Regal Coffee Percolator Urn, please contact the original manufacturer of the percolator.