Profeeshaw Stainless Steel Wall Mount Hand Washing Basin

1. Introduction and Overview

This manual provides instructions for the installation, operation, and maintenance of your Profeeshaw Stainless Steel Wall Mount Hand Washing Basin, Model PR-HS-17-SP. This commercial-grade sink is NSF certified and designed for durability and hygiene in various professional and home settings.

Image 1: Profeeshaw Stainless Steel Wall Mount Hand Washing Basin.

2. Product Features

• Durable Construction: Manufactured from 20-gauge Type 304 stainless steel for corrosion resistance and longevity.
• NSF Certified: Meets public health and safety standards, suitable for commercial use.
• Generous Bowl Capacity: Features a 14" x 10" bowl with a depth of 5.5 inches.
• Integrated Splash Guards: Tall side and back splash guards prevent water from splashing onto surrounding walls and surfaces.
• Gooseneck Faucet: Includes an 8-inch gooseneck faucet designed for flexible washing and 360-degree swivel.
• Efficient Drainage: Equipped with 1 1/2" IPS drain baskets to prevent clogging.
• Easy to Clean Design: Round corners facilitate quick and thorough cleaning.
• Versatile Installation: Supports both wall-mounted and embedded installation methods.

Image 2: Key features of the sink, highlighting the gooseneck faucet, back splash, and round corners for hygiene.

Image 3: Illustration of the practical drainage system designed to prevent blocking.

3. Setup and Installation

The Profeeshaw hand washing basin is designed for straightforward installation. It can be wall-mounted or embedded into a countertop.

3.1 Unpacking and Inspection

1. Carefully remove all components from the packaging.
2. Inspect all parts for any signs of damage. Contact customer support immediately if any damage is found.
3. Verify that all listed components are present: sink basin, gooseneck faucet, 1 1/2" IPS drain baskets, and mounting bracket.

3.2 Required Tools (Not Included)

• Drill
• Screwdriver
• Wrench
• Plumber's putty or silicone sealant
• Water supply lines (hot and cold)
• 90-degree drop fittings (if required for your plumbing setup)

3.3 Installation Steps

1. Mounting Bracket Installation: Secure the provided mounting bracket to the wall at the desired height using appropriate fasteners for your wall type. Ensure the bracket is level and securely attached to support the weight of the sink and water.
2. Faucet Installation: Install the gooseneck faucet onto the sink basin. Connect the hot and cold water supply lines to the faucet.
3. Drain Basket Installation: Install the 1 1/2" IPS drain basket into the sink's drain opening. Apply plumber's putty or silicone sealant around the drain opening to ensure a watertight seal.
4. Sink Placement: Carefully slide the sink basin onto the wall-mounted bracket. Ensure it is properly seated and stable. For embedded installations, place the sink into the countertop cutout and secure it according to standard embedded sink installation practices.
5. Water Line Connection: Connect the water supply lines from the faucet to your building's hot and cold water supply valves. Ensure all connections are tight to prevent leaks.
6. Drain Connection: Connect the sink's drain to your plumbing system. Use appropriate P-traps and fittings as required by local codes.
7. Leak Check: Turn on the water supply and thoroughly check all connections for leaks. Tighten any leaking connections as necessary.

Image 4: Illustration of wall-mounted and embedded installation options.

4. Operating Instructions

The Profeeshaw hand washing basin is designed for simple and efficient use.

1. Water Flow: Turn the hot and cold water handles to adjust the water temperature and flow rate as desired.
2. Faucet Swivel: The gooseneck faucet can be swiveled 360 degrees to direct water flow within the basin.
3. Drainage: Ensure the drain basket is properly seated to allow water to drain effectively. The basket helps prevent larger debris from entering the plumbing system.

5. Maintenance

Regular cleaning and maintenance will ensure the longevity and hygienic performance of your stainless steel sink.

• Daily Cleaning: After each use, rinse the sink thoroughly with water. Use a mild soap or detergent and a soft cloth or sponge to clean all surfaces.
• Stain Removal: For stubborn stains, use a non-abrasive stainless steel cleaner. Always rub in the direction of the grain to avoid scratching.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, steel wool, or cleaners containing bleach or chlorides, as these can damage the stainless steel finish.
• Prevent Rust: Although made of stainless steel, prolonged contact with iron-containing materials or certain chemicals can cause surface rust. Promptly remove any rust spots with a stainless steel cleaner.
• Drain Maintenance: Regularly clean the drain basket to remove accumulated food particles and debris, preventing clogs.

6. Troubleshooting

If you encounter issues with your sink, refer to the following common troubleshooting steps:

• Low Water Pressure: Check if the water supply valves are fully open. Inspect the faucet aerator for mineral buildup and clean if necessary.
• Leaks: Inspect all water supply line connections and drain connections for tightness. Tighten any loose fittings. If leaks persist, professional plumbing assistance may be required.
• Slow Drainage: Remove and clean the drain basket. If drainage remains slow, a clog may be present further down the plumbing system, requiring professional attention.
• Faucet Drips: Worn washers or cartridges in the faucet handles can cause drips. These may need to be replaced.

7. Specifications

Image 5: Detailed dimensions of the sink components.

8. Warranty and Support

For warranty information and customer support, please contact Profeeshaw directly. The manufacturer aims to provide excellent service and a positive experience.

Profeeshaw offers 7-24 service for customer inquiries and support.