Introduction
Thank you for choosing the Prepac Mate's Queen 6-Drawer Minimalist Platform Storage Bed. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new bed. Designed to maximize storage in your bedroom, this queen-sized platform bed features six deep drawers and a slat support system, eliminating the need for a box spring. Constructed from non-toxic, CARB-2 compliant, laminated composite woods, this product is manufactured in Canada and meets all North American safety standards.
Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Always follow the assembly instructions provided in the booklet.
- Ensure all hardware is securely fastened before use. Periodically check and tighten fasteners as needed.
- Do not exceed the maximum weight capacity of 500 lbs for the bed.
- Keep small parts and packaging materials away from children during assembly to prevent choking hazards.
- Use on a level surface to prevent tipping or instability.
Package Contents
Your Prepac Mate's Queen 6-Drawer Minimalist Platform Storage Bed package includes:
- All necessary wooden components for the bed frame and six drawers.
- Hardware kit (screws, cam locks, dowels, drawer slides, etc.).
- Wooden slats for mattress support.
- Instruction booklet for detailed assembly steps.
Please verify all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, contact Prepac customer support.
Assembly Instructions
Assembly is required for this product. It is recommended to have two people for assembly. Please refer to the included instruction booklet for step-by-step diagrams and specific part identification. The following general guidelines and videos will assist you.
General Assembly Steps:
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify all hardware using the parts list in your instruction booklet.
- Assemble the main bed frame structure, ensuring all cam locks and connectors are securely fastened.
- Install the drawer slides onto the bed frame and assemble the six drawers.
- Place the wooden slats across the bed frame for mattress support.
Understanding Prepac Hardware
This video demonstrates the common hardware used in Prepac furniture and how to properly install them for a secure assembly.
Video: How to Use Prepac Hardware. This video illustrates the proper installation of various hardware components, including cam locks and connectors, ensuring a durable and secure assembly.
Product Visuals and Dimensions
Operating Instructions
Drawer Usage:
The bed features six 18-inch deep drawers (three per side) for convenient storage. Each drawer is equipped with sturdy solid wood sides and glides smoothly on metal runners with built-in safety stops. Finger pulls at the bottom of each drawer front allow for easy opening and closing.
Mattress Placement:
This platform bed is designed for use with a queen-sized mattress directly on the wooden slats. A box spring is not required. Ensure the mattress is centered and evenly distributed over the slats.
Maintenance
To maintain the appearance and longevity of your Prepac storage bed, follow these simple care instructions:
- Cleaning: Wipe surfaces with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the laminate finish.
- Hardware: Periodically check all screws, cam locks, and other fasteners to ensure they remain tight. Tighten any loose hardware to maintain structural integrity.
- Drawer Slides: If drawers become stiff, a small amount of silicone-based lubricant can be applied to the metal runners.
- Protection: Avoid placing hot items directly on the surface. Use coasters or protective pads as needed.
Troubleshooting
Drawer Alignment Issues:
If your drawers appear misaligned after assembly, the bed frame may not be perfectly 'square'. This can often be corrected by carefully adjusting the bed's position.
Video: How to Correct an 'Out of Square' Storage Bed. This video provides guidance on how to adjust your storage bed to ensure proper drawer alignment, especially on different flooring types.
On Hardwood Floors: Gently slide the bed frame to adjust the alignment of the drawers. Small movements can make a significant difference.
On Carpet: Due to the friction of carpet, you must carefully lift the bed frame slightly before repositioning it to adjust drawer alignment. Do not drag the bed on carpet, as this can cause damage or further misalignment.
Loose Hardware:
If any part of the bed feels wobbly or unstable, check all assembly hardware and tighten as necessary. Do not overtighten, as this can strip screws or damage the wood.
Specifications
| Feature | Detail |
|---|---|
| Size | Queen |
| Product Dimensions (L x W x H) | 81.5" x 63" x 18.75" |
| Internal Drawer Dimensions (W x H x D) | 23.25" x 5" x 18" |
| Color | Drifted Gray |
| Finish Type | Wood (Laminated Composite Woods) |
| Furniture Finish | Pine |
| Weight Capacity | 500 lbs |
| Item Weight | 158 pounds |
| Assembly Required | Yes |
| Special Feature | Slat support system (no box spring needed), six 18" deep drawers |
| Included Components | Hardware, Instruction Booklet, Slats |
| Product Care Instructions | Wipe with Dry Cloth |
| Model Number | DBQ-6200-3K |
| UPC | 772398600529 |
Warranty and Support
This Prepac product comes with a 5-year manufacturer's limited parts warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For any questions, missing parts, or warranty inquiries, please contact our North America Based Customer Support Team. Refer to the contact information provided in your instruction booklet or visit the official Prepac website for assistance.