BONNYCO GE0022

BONNYCO Wooden Folding Book Lamp User Manual

Model: GE0022

1. Introduction

Thank you for purchasing the BONNYCO Wooden Folding Book Lamp. This LED lamp is designed to provide versatile lighting with its unique book-like design, remote control functionality, and multiple color options. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

2. Safety Instructions

  • Do not expose the lamp to water or excessive moisture.
  • Avoid dropping or subjecting the lamp to strong impacts.
  • Do not attempt to disassemble or modify the lamp. This will void the warranty.
  • Keep the lamp away from direct heat sources and open flames.
  • Use only the provided USB cable for charging.
  • Ensure the charging voltage is DC 5V.
  • Keep out of reach of children.

3. Package Contents

Verify that all items are present in the package:

  • 1 x BONNYCO Wooden Folding Book Lamp
  • 1 x Remote Control
  • 1 x USB Charging Cable (1.5m)
  • 1 x User Manual (this document)
Package contents of the BONNYCO Wooden Folding Book Lamp, showing the lamp, remote control, USB cable, and user manual.
Figure 3.1: Included components: Book Lamp, Remote Control, USB Cable, and User Manual.

4. Product Overview

The BONNYCO Book Lamp features a high-quality maple wood cover and 36 sheets of durable parchment paper. Its magnetic closure allows for flexible positioning up to 360 degrees. The lamp's dimensions are approximately 14.5 cm (length) x 10 cm (width) x 2.5 cm (thickness).

Diagram illustrating the features of the BONNYCO Wooden Folding Book Lamp, including rechargeable battery, timer, light programs, 16 colors, maple wood and parchment paper construction, 5 light intensities, and 360-degree positioning.
Figure 4.1: Key features of the Book Lamp.
Comparison image showing the BONNYCO Book Lamp dimensions (14.5cm x 10cm) and highlighting its features like remote control, 16 colors, durable paper, and color change by opening/closing.
Figure 4.2: Physical dimensions and design elements of the Book Lamp.

5. Setup

5.1 Initial Charging

  1. Connect the small end of the USB charging cable to the charging port on the book lamp.
  2. Connect the larger end of the USB cable to a USB power source (e.g., computer, power bank, or a wall charger (not included)).
  3. The lamp will display a soft red glow while charging.
  4. Charging typically takes 2 to 3 hours. The red light will turn green when fully charged.

5.2 Remote Control Preparation

The remote control comes with a pre-installed battery. Remove the plastic insulation tab from the battery compartment before first use.

6. Operating Instructions

6.1 Powering On/Off

  • Manual Operation: Gently open the book lamp to turn it on. Close the book lamp to turn it off.
  • Remote Control: Press the ON/OFF button on the remote control to turn the lamp on or off.

6.2 Changing Colors

  • Manual Operation: Each time you open and close the book lamp, the color will cycle to the next available color.
  • Remote Control: Use the color buttons on the remote control to select from 16 different colors.
Grid of 16 different color options displayed by the BONNYCO Wooden Folding Book Lamp.
Figure 6.1: The 16 available colors.

6.3 Adjusting Brightness

The remote control allows you to adjust the brightness intensity of the light up to five levels.

  • Press the Brightness Up button () to increase brightness.
  • Press the Brightness Down button () to decrease brightness.
Image showing the remote control and five different brightness levels of the book lamp.
Figure 6.2: Remote control and brightness adjustment.

6.4 Timer Function

Set the lamp to automatically turn off after a specified period:

  • Press the 30' button for 30 minutes.
  • Press the 1H button for 1 hour.
  • Press the 2H button for 2 hours.

6.5 Light Programs

The remote control offers two dynamic light programs:

  • Fading Mode: Colors will smoothly transition from one to another.
  • Flashing Mode: Colors will change abruptly without transition.

7. Maintenance

  • Cleaning: Wipe the lamp's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the lamp in a cool, dry place when not in use for extended periods.
  • Battery: The remote control uses a replaceable button cell battery. Refer to the remote control's back for battery replacement instructions.

8. Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.Battery is depleted.Charge the lamp using the USB cable.
Lamp does not turn on.Lamp is not fully opened.Ensure the book lamp is opened sufficiently to activate the light.
Remote control not working.Remote control battery is depleted or insulation tab is still present.Remove the plastic tab from the remote control battery compartment. Replace the battery if necessary.
Lamp not charging.USB cable or power source issue.Ensure the USB cable is securely connected. Try a different USB port or power adapter.

9. Specifications

FeatureDetail
Model NumberGE0022
Dimensions (Lamp)14.5 x 10 x 2.5 cm (Length x Width x Thickness)
Battery Type1200mAh Lithium Battery
Working Voltage/CurrentDC 5V
Maximum Power2W
Lumen Output500 lumens
Battery LifeUp to 8 hours (minimum brightness, single color); 4-5 hours (maximum brightness, program)
Charging Time2-3 hours
Light Colors16 colors
MaterialMaple Wood, Parchment Paper
CertificationsCE & RoHS

10. Warranty and Support

BONNYCO offers a 1-year satisfaction guarantee for this product. If you are not 100% satisfied with your book lamp, please contact the seller for return information and support. Your satisfaction is important.

For further assistance or inquiries, please refer to the contact information provided with your purchase or visit the official BONNYCO website.

Documents - BONNYCO – GE0022

no relevant documents

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.