Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your TFA Dostmann 60.5015.04 Projection Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and longevity.
Front view of the TFA Dostmann 60.5015.04 Projection Alarm Clock, highlighting the green LED display and control buttons.
Setup
Package Contents
Ensure all items are present:
- TFA Dostmann 60.5015.04 Projection Alarm Clock
- Power Adapter
- USB Cable
- CR2032 Battery (for backup)
- Instruction Manual
Powering the Device
- Insert the included CR2032 battery into the battery compartment. This battery serves as a backup for time settings during power outages.
- Connect the power adapter to the DC IN port on the back of the alarm clock.
- Plug the power adapter into a standard electrical outlet. The display will illuminate.
Diagram illustrating the dimensions (180x48x100mm) and key features of the TFA Dostmann 60.5015.04 Projection Alarm Clock, including USB charging, alarm functions, display, and FM radio.
Operating Instructions
Setting the Time
- Press and hold the SET button until the hour digits flash.
- Use the VOL or AL buttons to adjust the hour.
- Press SET again to confirm the hour and move to minute setting.
- Use the VOL or AL buttons to adjust the minutes.
- Press SET to save the time and exit setting mode.
Setting Alarms (Alarm 1 & Alarm 2)
The device features two independent alarms.
- Press the AL button once to select Alarm 1, or twice for Alarm 2. The alarm icon will appear.
- Press and hold the AL button until the alarm hour digits flash.
- Use the VOL or AL buttons to adjust the alarm hour.
- Press AL again to confirm the hour and move to minute setting.
- Use the VOL or AL buttons to adjust the alarm minutes.
- Press AL to select the alarm source (radio or buzzer).
- Press AL again to save the alarm setting.
- To activate/deactivate an alarm, press the AL button repeatedly until the desired alarm icon (1 or 2) is shown or hidden.
Snooze Function
When an alarm sounds, press the SNOOZE/DIMMER button to activate snooze. The alarm will pause and sound again after the set snooze duration (default 9 minutes, adjustable from 5 to 60 minutes). To adjust snooze duration:
- While in time setting mode (after setting minutes), press SET again. The snooze duration will flash.
- Use VOL or AL to adjust the duration.
- Press SET to save.
FM Radio Operation
- Press the RADIO/SLEEP button to turn the radio on/off.
- Use the VOL buttons to adjust the volume.
- Press and hold the VOL buttons to automatically scan for stations.
- To manually tune, short press the VOL buttons.
- To save a station (up to 15 presets):
- Tune to the desired station.
- Press and hold the SET button until "P01" flashes.
- Use VOL or AL to select a preset number.
- Press SET to save.
- To recall a preset station, short press the SET button repeatedly.
Sleep Timer
To fall asleep to the radio, activate the sleep timer:
- While the radio is playing, press the RADIO/SLEEP button repeatedly to cycle through sleep timer options (e.g., 90, 60, 30, 15 minutes, OFF).
- The radio will automatically turn off after the selected duration.
Display Brightness and Projection
The main display has three brightness levels, automatic dimming, or can be turned off at night via a light sensor. The projection has two brightness levels.
- Display Brightness: Short press the SNOOZE/DIMMER button to cycle through display brightness levels (High, Medium, Low, Auto Dim, Off).
- Time Projection:
- The projection lens is located on the right side of the unit.
- Adjust the angle of the projection lens to project the time onto a wall or ceiling.
- Rotate the focus ring on the lens to sharpen the projected image.
- Press the projection button (usually on the side of the projection arm) to cycle through projection brightness levels (High, Low, Off) or to invert the projection.
TFA Dostmann 60.5015.04 Projection Alarm Clock in a bedroom setting, projecting the time '14:55' onto a wall.
USB Charging Function
The alarm clock features a USB port (1A) for charging mobile devices.
- Connect your smartphone or other mobile device to the USB charging port on the back of the alarm clock using a compatible USB cable.
- The device will begin charging.
TFA Dostmann 60.5015.04 Projection Alarm Clock next to a smartphone being charged via its USB port.
Maintenance
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the device away from water and high humidity.
- Ensure the ventilation openings are not blocked.
- If the backup battery needs replacement, use a CR2032 type battery.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is off or flickering. | Power adapter not connected or faulty; display brightness set to 'Off'. | Check power connection. Press SNOOZE/DIMMER to adjust brightness. |
| No radio reception or poor quality. | Weak signal; antenna not extended. | Adjust the position of the device. Extend the FM antenna fully. Try automatic station scan. |
| Alarm does not sound. | Alarm not activated; volume too low; incorrect alarm time. | Ensure alarm icon is displayed. Increase radio/buzzer volume. Verify alarm time setting. |
| Projection is blurry or not visible. | Out of focus; projection brightness set to 'Off'; incorrect angle. | Rotate the focus ring on the lens. Press the projection button to adjust brightness. Adjust the projection arm angle. |
| USB charging not working. | Device not powered; faulty USB cable; incompatible device. | Ensure alarm clock is powered. Try a different USB cable. Check device compatibility. |
Specifications
- Model: TFA Dostmann 60.5015.04
- Material: Plastic
- Display Type: Digital LED (Green digits)
- Power Source: AC Power Adapter (included), 1x CR2032 battery (backup, included)
- Dimensions (L x W x H): 180 x 48 x 100 mm
- Weight: 216 grams
- Clock Movement: Quartz
- Connectivity: USB (for charging mobile devices, 1A)
- Radio: FM with 15 preset stations
- Alarms: 2 independent alarms (radio or buzzer)
- Snooze Duration: Adjustable (5-60 minutes)
- Projection: Time projection on wall/ceiling with 2 brightness levels
- Display Brightness: 3 levels, auto-dimming, or off via light sensor
- Included Components: Projection alarm clock, USB cable, power adapter, instruction manual
Warranty
TFA Dostmann GmbH provides a 1-year warranty for spare parts within the EU. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact TFA Dostmann customer support.
Customer Support
For further assistance, technical support, or inquiries regarding your TFA Dostmann 60.5015.04 Projection Alarm Clock, please visit the official TFA Dostmann website or contact their customer service department. Contact information can typically be found in the included documentation or on the manufacturer's website.
Manufacturer: TFA Dostmann GmbH
Website: www.tfa-dostmann.de