Introduction
The WEBANG Recessed Connectivity Box Outlet is designed for integration into furniture, providing convenient access to power and data connections. This unit is suitable for various environments such as conference rooms, offices, and homes, offering a tidy solution for cable management.
This manual provides instructions for the safe and proper installation, operation, and maintenance of your connectivity box.
Product Features
- Integrated Design: Features a textured black face plate made of aluminum alloy, designed for seamless integration into desks or other furniture surfaces.
- Multi-Outlet Configuration: Includes two AC power receptacles, two RJ45 (CAT6) ports, one HDMI port, one USB 3.0 port, one 3.5mm audio jack, and one VGA port.
- Space-Saving: Provides a reliable power and data solution that helps maintain an organized workspace by eliminating visible cables and power strips.
- Easy Installation: Designed for straightforward installation into a prepared cutout in a table or desk.
- Safety Features: Constructed with a fire-resistant outer shell and an integrated safety system for device protection. The unit closes flush with the table when not in use, opening and closing via a top panel press mechanism.
Image: The WEBANG Recessed Connectivity Box Outlet in its closed position, showcasing the sleek black aluminum alloy finish.
Package Contents
- WEBANG Connectivity Box Outlet x 1
- Pack of Screws x 1
- Installation Instruction x 1 (This manual)
Setup and Installation
Follow these steps for proper installation of the WEBANG Recessed Connectivity Box Outlet:
- Prepare the Surface: Create a rectangular hole on the desired surface (e.g., conference table, desk). The recommended hole dimensions are 10.12 inches (L) x 4.69 inches (W) x 3.33 inches (H). Ensure the cutout is precise to allow for a secure fit.
- Insert the Socket: Carefully place the connectivity box into the prepared hole.
- Secure the Unit: Secure the socket using the provided power grommet.
- Final Fastening: Fix the unit firmly with the included screws.
- Connect Power: Connect the main power cable to a suitable power source. The unit is now ready for use.
Image: A diagram illustrating the required hole dimensions for installing the connectivity box into a surface. The hole size is specified as 10.12 inches (L) x 4.69 inches (W) x 3.33 inches (H).
Image: An illustration demonstrating the lid opening mechanism of the connectivity box, revealing the ports inside.
Operating Instructions
To access the ports, gently press the top panel of the connectivity box. The integrated damping system will allow the lid to open smoothly and silently, revealing the various connection options.
Image: A close-up view of the open connectivity box, clearly labeling each of its multiple connection ports: AC power, RJ45, USB 3.0, HDMI, VGA, and 3.5mm Audio.
- AC Power Receptacles: Plug in standard electronic devices requiring AC power.
- RJ45 (CAT6) Ports: Connect network cables for internet or local area network access.
- HDMI Port: Connect devices such as laptops or media players for high-definition video and audio output to a display.
- USB 3.0 Port: Connect USB devices for data transfer or charging.
- 3.5mm Audio Jack: Connect headphones, speakers, or other audio devices.
- VGA Port: Connect devices for analog video output to a display.
When not in use, gently press the lid down until it closes flush with the table surface to protect the ports and maintain a clean aesthetic.
Image: The connectivity box integrated into a desk, with a power adapter plugged into one of the AC outlets, demonstrating its practical use in an office setting.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the connectivity box. Avoid abrasive cleaners or solvents that may damage the finish.
- Dust Removal: Periodically inspect the ports for dust accumulation. Use compressed air to gently clear any dust from the ports to ensure optimal connection performance.
- Cable Management: Ensure that connected cables are not excessively strained or bent, which could lead to damage over time.
- Inspection: Regularly check the unit for any signs of wear or damage. If any damage is observed, discontinue use and contact support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power from AC outlets. | Unit not properly connected to power source; circuit breaker tripped. | Ensure the main power cable is securely plugged in. Check your building's circuit breaker. |
| No network connection from RJ45 ports. | Network cable faulty; network not active; incorrect settings. | Test with a different network cable. Verify network connectivity on your device. Consult your network administrator. |
| No display/audio from HDMI/VGA/3.5mm ports. | Cable not fully inserted; incorrect input selected on display; device output settings. | Ensure cables are securely connected. Select the correct input source on your display. Check your device's display/audio output settings. |
| USB device not recognized or charging slowly. | Device driver issues; high power demand; faulty USB cable. | Try a different USB device or cable. Ensure your device drivers are up to date. Note that some high-power devices may charge slower via standard USB ports. |
| Lid mechanism is stiff or not opening/closing smoothly. | Dust or debris in the mechanism; mechanical obstruction. | Gently clean around the lid mechanism. Ensure no objects are obstructing its movement. Do not force the lid. |
| Warning: Potential wiring issues reported in some units. | Internal wiring may be improperly routed, potentially causing contact with the metal enclosure. | If you observe any exposed wires, loose connections, or experience electrical issues, immediately disconnect the unit from power and contact customer support. Do not attempt to repair it yourself. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 795787584255 |
| Product Dimensions (Face Plate) | 10.47 inches (L) x 5.12 inches (W) x 3.54 inches (H) |
| Recommended Hole Cutout Dimensions | 10.12 inches (L) x 4.69 inches (W) x 3.33 inches (H) |
| Item Weight | 3.54 pounds |
| Material | Aluminium Alloy |
| Color | Black |
| Connectivity Ports | 2 x AC Receptacles, 2 x RJ45 (CAT6), 1 x HDMI, 1 x USB 3.0, 1 x 3.5mm Audio, 1 x VGA |
| Compatible Devices | All standard devices compatible with listed ports |
Warranty and Support
This WEBANG Recessed Connectivity Box Outlet comes with a 2-Year Warranty from the date of purchase.
For warranty claims, technical support, or any inquiries regarding your product, please contact WEBANG customer service through the retailer where the product was purchased or visit the official WEBANG website for contact information.
Please retain your proof of purchase for warranty validation.