TUG Upgraded Rechargeable Bark Collar TC-002B-BLK User Manual

Introduction

This manual provides instructions for the safe and effective use of your TUG Upgraded Rechargeable Bark Collar. This device is designed to assist in training your dog to reduce excessive barking through humane and adjustable correction modes.

Image: The TUG Upgraded Rechargeable Bark Collar, showing its compact design and the main unit.

Safety Information

• This collar is intended for training purposes only and should not be used as a primary restraint.
• Do not leave the collar on your dog for more than 12 consecutive hours to prevent skin irritation.
• Regularly check your dog's neck for any signs of irritation, redness, or sores. If irritation occurs, discontinue use until the skin heals.
• Ensure the collar is fitted correctly, snug enough for the contact points to touch the skin, but not so tight as to cause discomfort or restrict breathing.
• Not recommended for puppies under 6 months old or dogs weighing less than 11 lbs.
• Keep out of reach of children.

Package Contents

Verify that all items are present in your package:

• TUG Bark Collar Unit
• Adjustable Nylon Collar Strap
• USB Charging Cable
• Long and Short Contact Points (pre-installed or separate)
• User Manual (this document)

Product Overview

The TUG Bark Collar features an intelligent sensor and an exclusive easy-touch interface for convenient operation.

Key Features:

• Intelligent Sensor: Utilizes a TUG-featured algorithm to accurately detect your dog's barking, minimizing false triggers from other dogs or noises.
• Adjustable Training Modes: Offers beeping, vibration, and static correction functions. These can be combined or used individually.
• 7 Sensitivity Levels: Allows customization to suit your dog's barking habits and environment.
• Easy-Touch Interface: Buttons located on the front of the device enable adjustments even while the collar is being worn. Includes a lock feature to prevent accidental changes.
• Large LED Screen: Displays current modes and battery levels clearly for day and night use.
• IP67 Waterproof Rating: Suitable for indoor and outdoor use in various weather conditions, and easy to clean.
• Adjustable Strap: Fits neck sizes from 6 to 22 inches, suitable for most dogs over 11 lbs.

Components:

Image: Close-up view of the TUG Bark Collar showing the haptic touch buttons on the front surface, designed for easy adjustment.

Image: The large illuminated LED screen of the TUG Bark Collar, displaying settings and battery levels for visibility in various lighting conditions.

Image: Underside of the TUG Bark Collar, highlighting the high sensitivity sound sensor and the two contact points for correction.

Image: Various views of the TUG Bark Collar with measurements, showing its compact size and dimensions (approximately 2.8" length, 1.6" width, 1.5" height).

Setup

1. Charging the Device

The TUG Bark Collar uses a rechargeable Lithium Ion battery. Before first use, fully charge the device.

• Connect the USB charging cable to the charging port on the collar unit.
• Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer USB port.
• The LED screen will indicate charging status. A full charge typically takes 2-3 hours.
• Once fully charged, disconnect the cable.

2. Attaching the Collar Strap

Thread the adjustable nylon strap through the slots on the bark collar unit.

3. Selecting Contact Points

The collar comes with contact points. Choose the appropriate length based on your dog's coat thickness. Shorter points for short-haired dogs, longer points for long-haired dogs, ensuring they make proper skin contact.

4. Fitting the Collar on Your Dog

• Place the collar around your dog's neck so the unit is positioned centrally under their chin or on the side of their neck.
• Adjust the strap to ensure a snug fit. You should be able to fit one finger comfortably between the strap and your dog's neck.
• The contact points must touch your dog's skin to be effective. If necessary, trim some fur around the contact points for better contact.
• Ensure the collar is not too tight, as this can cause discomfort or skin irritation.

Operating Instructions

1. Powering On/Off

Press and hold the power button (usually indicated by a power symbol) for a few seconds to turn the collar on or off. The LED screen will illuminate upon activation.

2. Adjusting Sensitivity Levels

The collar has 7 sensitivity levels to detect barking. A higher sensitivity level means the collar will trigger more easily. Adjust this based on your dog's barking volume and the surrounding environment.

• Use the '+' and '-' buttons on the front of the device to increase or decrease the sensitivity level.
• Start with a lower sensitivity and gradually increase it if the collar is not consistently triggering when your dog barks.

3. Selecting Training Modes

The TUG Bark Collar offers beeping, vibration, and static correction modes. You can combine or remove vibration or static correction.

• Press the mode button (often indicated by an 'M' or a waveform symbol) to cycle through the available modes.
• The LED screen will display the active mode (e.g., 'B' for beep, 'V' for vibration, 'S' for static, or combinations).
• Adjust the intensity of vibration or static correction using the '+' and '-' buttons if applicable for the selected mode.
• It is recommended to start with beep and vibration modes before introducing static correction, and always begin with the lowest static level.

4. Lock Feature

To prevent accidental setting changes while the collar is being worn, activate the lock feature. Refer to the device's specific button combination (e.g., press and hold two buttons simultaneously) to engage and disengage the lock.

5. Training Tips

• Introduce the collar gradually. Let your dog wear it for short periods without activation first.
• Observe your dog's reaction to the corrections. The goal is to interrupt barking, not to cause distress.
• Combine collar use with positive reinforcement when your dog is quiet.
• Consistency is key for effective training.

Maintenance

• Cleaning: The IP67 waterproof rating allows for easy cleaning. Wipe the collar unit and strap with a damp cloth. Ensure the charging port cover is securely closed before cleaning or exposure to water.
• Contact Points: Periodically clean the contact points to ensure proper conductivity.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge when the battery level is low. If storing for an extended period, charge the battery to about 50% and store in a cool, dry place.
• Strap Inspection: Regularly inspect the collar strap for wear and tear. Replace if damaged.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact TUG Pet Products directly through their official website or customer service channels.

Keep your purchase receipt as proof of purchase for any warranty claims.