vidaXL 47773
vidaXL Folding Sun Lounger User Manual
Model: 47773
1. Introduction
Thank you for choosing the vidaXL Folding Sun Lounger. This manual provides essential information for the safe and effective use, assembly, and maintenance of your new sun lounger. Please read these instructions carefully before use and retain them for future reference.
This sun lounger is designed for outdoor relaxation, featuring a durable aluminum frame and a comfortable fabric surface. It includes an adjustable canopy for sun protection and a multi-position backrest for personalized comfort. Its lightweight and foldable design ensures easy transport and storage.

Figure 1.1: The vidaXL Folding Sun Lounger with its adjustable canopy and backrest.
2. Safety Information
To ensure safe operation and prevent injury or damage, please observe the following safety guidelines:
- Weight Limit: Do not exceed the maximum weight capacity of 264.6 pounds (120 kg). Overloading can cause damage to the lounger and lead to injury.
- Stable Surface: Always place the sun lounger on a flat, stable, and non-slippery surface to prevent tipping.
- Assembly: Ensure all parts are correctly assembled and securely fastened before use. Refer to the setup section for detailed instructions.
- Moving Parts: Be cautious of pinch points when adjusting the backrest or canopy, and when folding or unfolding the lounger. Keep hands and fingers clear.
- Children and Pets: Keep children and pets away from the lounger during assembly and adjustment. Do not allow children to play on or around the lounger unsupervised.
- Weather Conditions: Do not use the lounger during strong winds or severe weather. Store it indoors or in a protected area during adverse weather to prevent damage.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Components
The vidaXL Folding Sun Lounger typically consists of the following main components:
- Aluminum Frame (main body and legs)
- 600D Polyester Fabric (seating and backrest surface)
- Adjustable Canopy
- Backrest Adjustment Mechanism
- Folding Hinges
No additional assembly tools are typically required as the lounger is designed for easy unfolding and folding.
4. Setup
The sun lounger comes pre-assembled and requires minimal setup. Follow these steps to prepare it for use:
- Unpack: Carefully remove the lounger from its packaging.
- Unfold Frame: Place the folded lounger on a flat, open surface. Gently pull the main sections of the frame apart until the lounger fully extends and locks into its open position. Ensure all legs are firmly on the ground.
- Raise Canopy: Lift the canopy frame upwards until it is fully extended and secured in place. The canopy is designed to provide shade over the head area.
- Adjust Backrest: The backrest can be adjusted to various reclining positions. Lift the backrest slightly and move it to your desired angle, ensuring it clicks securely into one of the available notches on the support mechanism.

Figure 4.1: The sun lounger in a partially reclined position, ready for use.
5. Operating Instructions
5.1 Adjusting the Backrest
The backrest offers multiple reclining positions for optimal comfort:
- To recline, lift the backrest slightly to disengage it from its current notch.
- Gently lower the backrest to the desired angle, ensuring the support bar securely engages with one of the lower notches.
- To raise the backrest, lift it upwards until it disengages from the notch, then pull it forward to a more upright position and secure it in a higher notch.

Figure 5.1: Detail of the backrest adjustment mechanism, showing the notches for different reclining angles.
5.2 Adjusting the Canopy
The canopy provides adjustable shade:
- The canopy can be tilted forward or backward to adjust the amount of shade.
- To lower the canopy for storage or full sun exposure, gently push it down until it rests flat against the lounger.

Figure 5.2: The adjustable canopy providing overhead shade.
5.3 Folding for Storage
To fold the lounger for compact storage or transport:
- Ensure the backrest is in its lowest, flat position.
- Lower the canopy completely.
- Locate the folding hinges on the frame. Carefully push the frame sections together, allowing the lounger to collapse into its folded position. Ensure all parts are tucked in neatly.
- Secure any straps or latches if present to keep the lounger folded.

Figure 5.3: The sun lounger in its compact folded configuration for easy storage and transport.
6. Maintenance
Regular maintenance will extend the life and appearance of your sun lounger:
- Cleaning Fabric: For general cleaning, wipe the 600D polyester fabric with a damp cloth. For stubborn stains, use a mild soap solution and a soft brush. Rinse thoroughly with clean water and allow to air dry completely before folding or storing. Do not use harsh chemicals or abrasive cleaners.
- Cleaning Frame: Wipe the aluminum frame with a damp cloth. Avoid abrasive materials that could scratch the powder-coated finish.
- Inspection: Periodically check all bolts, screws, and moving parts to ensure they are secure. Tighten any loose fasteners as needed.
- Storage: When not in use, especially during off-season or inclement weather, store the folded lounger in a dry, protected area to prevent damage from moisture, extreme temperatures, or prolonged sun exposure.
7. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lounger feels unstable or wobbly. | Not fully unfolded; uneven surface; loose fasteners. | Ensure the frame is fully extended and locked. Move to a flat, level surface. Check and tighten all visible fasteners. |
| Difficulty adjusting backrest. | Mechanism jammed; dirt in notches; excessive force. | Lift the backrest slightly to release tension before adjusting. Clean any debris from the adjustment notches. Do not force the mechanism. |
| Lounger does not fold completely. | Fabric caught; obstruction in hinges. | Ensure fabric is not caught in the hinges. Check for any foreign objects obstructing the folding mechanism. |
| Canopy does not stay in position. | Loose joints; worn mechanism. | Check the canopy's pivot points for tightness. If the mechanism is worn, contact customer support. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact vidaXL customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | vidaXL |
| Model Name | Patio Lounge Chair Outdoor Chaise Lounge with Canopy Taupe Aluminum vidaXL |
| Model Number | 47773 |
| Color | Taupe |
| Product Dimensions (L x W x H) | 74.2" x 22.6" x 10.6" (188.5 cm x 57.5 cm x 27 cm) |
| Maximum Weight Recommendation | 264.6 Pounds (120 kg) |
| Item Weight | 9.13 Pounds (4.14 kg) |
| Frame Material | Powder-coated Aluminum |
| Fabric Material | 600D Polyester |
| Indoor/Outdoor Usage | Outdoor |
| Is Foldable | Yes |
| Number of Height Positions | 1 (for backrest adjustment) |
9. Warranty
Warranty information for your vidaXL Folding Sun Lounger is typically provided with your purchase documentation or can be found on the official vidaXL website. Please retain your proof of purchase for any warranty claims.
10. Customer Support
For further assistance, questions, or to report any issues with your vidaXL Folding Sun Lounger, please contact vidaXL customer support through their official website or the contact information provided at the time of purchase.
Website: www.vidaxl.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.