Aivituvin Two-Story Rabbit Hutch

Introduction

Thank you for choosing the Aivituvin Two-Story Rabbit Hutch (Model AIR06-C). This manual provides essential information for the proper assembly, operation, maintenance, and troubleshooting of your new pet enclosure. Designed for both indoor and outdoor use, this hutch offers a comfortable and secure environment for your rabbits or guinea pigs.

Figure 1: Aivituvin Two-Story Rabbit Hutch

Safety Instructions

• Always ensure all latches and locks are securely fastened to prevent pets from escaping and to protect them from potential predators.
• Regularly inspect the hutch for any damaged parts, sharp edges, or loose components that could harm your pet. Replace or repair as necessary.
• Position the hutch on a flat, stable surface to prevent tipping. If using outdoors, consider anchoring it for added stability, especially in windy conditions.
• Ensure adequate ventilation within the hutch, especially during warmer weather, to prevent overheating.
• Keep the hutch away from direct sunlight for prolonged periods to prevent overheating of pets and material degradation.
• This hutch is designed for small animals like rabbits and guinea pigs. Do not house animals larger than recommended.

Setup and Assembly

Assembly of the Aivituvin Rabbit Hutch is designed to be straightforward. Follow the included manufacturer's instructions carefully. All necessary hardware is provided, often with extra screws. Pay close attention to the orientation of parts, especially ramps, to ensure correct functionality.

Figure 2: Included Components and Access Areas

Key Assembly Points:

• Component Identification: Familiarize yourself with all parts before beginning assembly.
• Pre-drilled Holes: Most panels feature pre-drilled holes for easy alignment. For sections without pilot holes, ensure careful alignment before securing.
• Ramp Placement: The hutch includes two ramps for multi-level access. Ensure the lower ramp is positioned against the back of the hutch and the higher ramp against the front for proper zig-zag access. Incorrect placement may require re-assembly.
• Wheel Installation: The hutch comes with four strong metal wheels, two of which have brakes. These can be installed for easy mobility or omitted if a stationary setup is preferred. If omitted, ensure the hutch is elevated slightly to prevent moisture damage to the base.

Figure 3: Durable Casters for Mobility

Dimensions:

The assembled dimensions of the Aivituvin Two-Story Rabbit Hutch (Model AIR06-C) are approximately 47.2 inches in length, 19.7 inches in width, and 42 inches in height.

Figure 4: Product Dimensions

Operating the Hutch

The Aivituvin Rabbit Hutch is designed for ease of use and pet comfort. It features multiple access points and a multi-level design to provide ample space for your pet.

Key Features:

• Two-Story Design: Allows pets to move between levels via ramps, providing more vertical space and enrichment.
• Multiple Access Doors: Four lockable front doors and a central window provide various points of entry and observation, enhancing accessibility for interaction and cleaning.
• No-Leak Trays: Two deep, pull-out plastic trays are designed to prevent leaks and simplify waste removal.

Figure 5: Deep No-Leak Trays

Placement Considerations:

• Indoor Use: The hutch's design is suitable for indoor environments, providing a secure and contained space for pets.
• Outdoor Use: When used outdoors, ensure the hutch is placed in a shaded area to protect pets from direct sunlight and extreme temperatures. The asphalt roof provides rain resistance.

Maintenance

Regular maintenance is crucial for the longevity of your hutch and the health of your pet.

• Tray Cleaning: The pull-out trays make cleaning easy. Remove trays daily to dispose of waste and clean with pet-safe cleaners. Ensure trays are completely dry before reinserting.
• Wood Care: The hutch is constructed from fir wood. For outdoor use, it is recommended to apply an additional pet-safe sealant to the wood to enhance weather resistance and prevent moisture absorption, which can lead to swelling or damage over time.
• Odor Management: Upon initial setup, the hutch may have a strong wood smell. Allow the hutch to air out in a well-ventilated area for several days before introducing your pet. Regular cleaning and good ventilation will help manage odors during use.
• General Inspection: Periodically check all screws, hinges, and latches to ensure they are tight and functioning correctly.

Troubleshooting

This section addresses common issues you might encounter with your Aivituvin Rabbit Hutch.

• Urine Leakage: If urine leakage occurs, ensure the deep trays are correctly seated and not overflowing. Verify that the hutch is on a level surface. Applying an additional sealant to the wood, especially around the tray areas, can help prevent absorption and leakage.
• Wood Swelling: Wood swelling can occur due to prolonged exposure to moisture, particularly if used outdoors without adequate sealing. Ensure proper sealing and consider placing the hutch in a covered area or using a hutch cover during heavy rain.
• Strong Odor: A strong wood smell is normal initially. Allow ample time for airing out before use. During operation, ensure regular cleaning of trays and bedding, and provide good ventilation to dissipate odors.
• Difficulty Moving Hutch: If wheels are installed and the hutch is difficult to move, check if the brakes are engaged. Ensure the wheels are clean and free of debris.

Specifications

Warranty and Support

Aivituvin offers customer support for their products. For any inquiries or assistance, please contact the seller, AIVITUVIN PETS. The product is eligible for 30-day easy returns.

For more information and to explore other products, visit the official Aivituvin Store.