Introduction
The Marrado C1 Plus LED Lamp with Motion Detector is designed to provide convenient and adaptable lighting for various indoor environments. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device, ensuring optimal performance and user satisfaction.
Image: The Marrado C1 Plus LED Lamp, a cylindrical white lamp with a touch-sensitive top and control buttons at the base, shown alongside its square white motion detector.
Package Contents
- Marrado C1 Plus LED Lamp
- Marrado Motion Detector (Model: C-TX)
- DC Charging Cable
- User Manual (this document)
Image: A diagram illustrating the Marrado motion detector and the night light, with icons depicting motion detection and automatic illumination. The text indicates the package includes the night light and motion detector.
Product Overview
The Marrado C1 Plus system consists of two main components: a rechargeable LED lamp and a battery-powered motion detector. The LED lamp features touch control for brightness adjustment and can function independently as a bedside or table lamp. The motion detector activates the lamp automatically in dark environments when motion is detected, offering hands-free illumination.
Setup
- Charging the LED Lamp
- Connect the provided DC charging cable to the lamp's charging port.
- Connect the other end of the cable to a suitable USB power adapter (not included).
- Allow the lamp to charge fully before first use.
- Installing Batteries in the Motion Detector
- Locate the battery compartment on the back of the motion detector.
- Open the compartment and insert 2 AAA batteries (included), ensuring correct polarity.
- Close the battery compartment securely.
- Mounting the Motion Detector
The motion detector can be installed in three ways:
- 3M Sticker: Peel off the protective film from the adhesive sticker on the back of the detector and firmly press it onto a clean, dry surface.
- Magnetic Attraction: The detector has a magnetic back, allowing it to be attached to metallic surfaces.
- Bracket Placement: Place the detector on a flat surface using its integrated bracket.
For optimal motion detection, position the sensor within 3 meters (10 feet) of the desired detection area and ensure it has a clear line of sight.
Image: The back of the Marrado motion sensor, displaying the battery compartment, a timer switch with options for 20s, 40s, 50s, 1min, 2min, and 5min, and text indicating '3 WAYS TO INSTALL: 3M Sticker, Magnetic Attraction, Bracket Placement'.
Operating Instructions
- LED Lamp Operation (Manual Mode)
- Power On/Off: Lightly touch the top touch pad of the lamp to turn it on or off.
- Brightness Adjustment: With the lamp on, press and hold the top touch pad to cycle through the 3 available brightness levels. Release when the desired brightness is reached.
The lamp emits a warm white light, designed to be comfortable for the eyes. The lamp also supports various color modes for atmosphere, as shown in some product images.
Image: A hand demonstrating the touch control feature by touching the top surface of the Marrado LED lamp.
Image: Three Marrado LED lamps, each illuminated with a different color: warm white, blue, and pink, showcasing the lamp's various lighting modes.
- Motion Detection Mode
- When the motion detector is active and placed in a dark environment, it will automatically activate the LED lamp upon detecting human motion.
- The detection range is approximately 3 meters (10 feet) with a 120-degree vertical and horizontal detection angle.
- The maximum distance for the night light to respond to the sensor control is 25 meters.
Image: A multi-panel image demonstrating the motion detection feature. The top panel shows a foot passing a sensor under a bed. The bottom left panel shows the night light automatically illuminating in a bathroom. The bottom right panel shows the light automatically turning off after a set period.
- Setting the Motion Sensor Timer
- On the back of the motion detector, locate the timer switch.
- Select the desired duration for the light to remain on after motion is detected: 20 seconds, 40 seconds, 50 seconds, 1 minute, 2 minutes, or 5 minutes.
- The lamp will automatically turn off once the set time has elapsed and no further motion is detected.
Usage Scenarios
- Bedside Lamp: Use the lamp independently for reading or ambient light.
- Night Light: Place the motion detector in hallways, bathrooms, or bedrooms for automatic illumination during the night.
- Nursing Light: The soft, warm light is suitable for nurseries, providing gentle illumination without disturbing sleep.
Image: The Marrado LED lamp placed on a bedside table next to a smartphone, functioning as a standalone bedside lamp.
Image: The Marrado LED lamp providing soft illumination in a baby's room, positioned near a crib, highlighting its use as a nursing night light.
Maintenance
- Cleaning: Wipe the lamp and motion detector with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Battery Replacement (Motion Detector): When the motion detector's performance diminishes, replace the 2 AAA batteries with new ones, ensuring correct polarity.
- Lamp Charging: Recharge the LED lamp regularly to ensure optimal performance.
Troubleshooting
- Lamp does not turn on
- Ensure the lamp is charged.
- Verify the lamp is switched on via the touch control.
- Motion detector not activating lamp
- Check if the motion detector batteries are correctly installed and not depleted.
- Ensure the environment is sufficiently dark for the sensor to activate.
- Verify the motion detector is within range of the lamp (max 25m) and the detection area (max 3m).
- Ensure no obstructions are blocking the sensor's view.
- Lamp turns off too quickly/slowly
- Adjust the timer setting on the back of the motion detector to your preferred duration.
Specifications
| Feature | Detail |
|---|---|
| Brand | Marrado |
| Model Number | C1 Plus |
| Product Dimensions (L x W x H) | 8.6 x 8.6 x 12.1 cm |
| Item Weight | 300 grams |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Color | White |
| Light Source Type | LED (Warm White, Multi-color modes) |
| Special Features | Dimmable, Automatic On/Off (Motion Sensor) |
| Power Source (Lamp) | Rechargeable Battery |
| Power Source (Motion Detector) | 2 x AAA Batteries (included) |
| Motion Detection Range | Up to 3 meters (10 feet) |
| Motion Detection Angle | 120 degrees |
| Sensor Control Distance (Max) | 25 meters |
Warranty and Support
Marrado offers a lifetime commitment for this product. For any issues or inquiries, please contact Marrado customer service, available 24 hours a day. We are dedicated to providing the best customer experience.
