1. Introduction
Thank you for choosing the bmovor 30 oz Stainless Steel Tumbler. This manual provides essential information for the proper use, care, and maintenance of your new tumbler. Designed for durability and performance, this double-wall vacuum insulated cup is ideal for keeping your beverages hot or cold for extended periods.
Figure 1: The bmovor 30 oz Stainless Steel Tumbler, featuring a unique blue and gold leopard print design with a clear splash-proof lid.
2. Product Features
- Handmade Pattern: Each tumbler features a unique, hand-made leopard pattern, coated with food-safe epoxy for durability and to prevent fading. This multi-layer coating also adds to the insulation.
- Double-Wall Vacuum Insulation: Constructed with double walls and vacuum insulation to maintain beverage temperature, keeping drinks hot or cold for hours. This design also prevents external condensation and makes the exterior comfortable to hold.
- Well-Sealed Lid: Equipped with a thickened rubber seal ring for a spill-proof and leak-proof experience, enhancing heat preservation.
- Premium Material: Crafted from 304 food-grade 18/8 stainless steel, highly rust-resistant, durable, and electroplated polished on the inside. It is designed not to absorb odor, taste, or bacteria.
- Safe & Eco-Friendly: All components are non-toxic, BPA-free, and environmentally friendly, ensuring no alteration to drink flavors or leaching of chemicals.
- Convenient & Portable: Ideal for various settings including office, travel, hiking, home, and road trips. Designed to fit most car cup holders.
Figure 2: Illustration of the double-layer wall, ensuring the exterior remains comfortable to touch even with hot liquids inside.
Figure 3: The well-sealed lid design, highlighting its leak-proof capabilities.
3. Setup
Before first use, please follow these steps:
- Unpack: Carefully remove the tumbler and its lid from the packaging.
- Initial Cleaning: Wash the tumbler and lid thoroughly by hand with warm water and a mild, non-abrasive dish soap. Rinse completely.
- Dry: Allow all parts to air dry completely before assembly or storage.
4. Operating Instructions
Using your bmovor tumbler is straightforward:
- Filling: Remove the lid and pour your desired beverage into the tumbler. Do not overfill; leave some space at the top to prevent spills when the lid is attached.
- Securing the Lid: Place the lid firmly onto the tumbler, ensuring the rubber seal creates a tight fit. Press down gently and rotate if necessary until it feels secure. The lid features a slide cover for easy opening and closing of the drinking spout.
- Drinking: Slide the lid's cover to open the drinking spout. After drinking, slide it back to close to maintain temperature and prevent spills.
Figure 4: Close-up of the splash-proof lid with its sliding mechanism and the smooth, easy-to-clean inner surface of the tumbler.
Figure 5: The tumbler fits conveniently into most standard car cup holders, making it ideal for travel.
Figure 6: The tumbler is suitable for various outdoor activities, providing convenience and portability.
5. Maintenance and Care
Proper care will extend the life and performance of your tumbler:
- Hand Wash Only: Always wash the tumbler and lid by hand using a non-abrasive sponge or cloth.
- Avoid Soaking: Do not soak the tumbler, especially the exterior, to preserve the handmade pattern and epoxy coating.
- No Freezer or Microwave: Do not place the tumbler in the freezer or microwave. Extreme temperatures can damage the insulation and exterior finish.
- Storage: Store with the lid off to allow air circulation and prevent odors.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tumbler leaks | Lid not properly secured; Lid seal is dirty or damaged. | Ensure lid is firmly twisted or pressed on. Check the rubber seal for debris or damage and clean/replace if necessary. |
| Beverage does not stay hot/cold | Lid not sealed properly; Tumbler exposed to extreme external temperatures. | Verify the lid is securely closed. Avoid leaving the tumbler in direct sunlight or extremely cold environments for prolonged periods. |
| Odor inside tumbler | Improper cleaning or storage. | Wash thoroughly with warm soapy water and baking soda. Rinse well and air dry completely with the lid off. |
7. Specifications
- Capacity: 30 oz
- Material: 304 Food-Grade 18/8 Stainless Steel
- Insulation: Double-Wall Vacuum Insulated
- Lid Type: Splash-Proof Lid (Straw Lid & Flip Lid included in package)
- Color: Blue Leopard (Handmade Pattern)
- Dimensions: Approximately 8.4 x 4.2 x 4.1 inches (Package Dimensions)
- Item Weight: 1.15 pounds
- UPC: 664918230500
Figure 7: Tumbler dimensions and capacity details.
8. Warranty and Support
bmovor is committed to customer satisfaction. While specific warranty details are not provided in this manual, we encourage you to contact us directly if you encounter any issues with your tumbler, whether before or after purchase.
For support, please refer to the contact information provided at the point of purchase or visit the official bmovor brand page on Amazon for assistance.
Note: This product is designed for personal use and is not intended for commercial applications.