RENPHO Leg Massager with Heat User Manual

Introduction

The RENPHO Leg Massager with Heat is designed to provide air compression massage for your feet, calves, and thighs, helping to relieve swelling and pain, and promote recovery after exercise. This manual provides detailed instructions to help you safely and effectively use your new leg massager.

Image: The RENPHO Leg Massager with Heat, showing the leg wraps and handheld controller.

Safety Information

Please read all safety warnings and instructions before using this product to prevent injury or damage.

• May cause burns if used for extended periods at high heat settings.
• Do not use on broken skin or areas with impaired sensation.
• Avoid placing the massager on joints or bony areas.
• Keep the massager dry and unplug it when not in use.
• Do not use while sleeping or taking medication that causes drowsiness.
• Consult a doctor before use if you have a medical condition or are pregnant.
• Keep out of reach of children and pets.

Legal Disclaimer

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Package Contents

Ensure all items are present in the package:

• Leg Massager Wraps (Foot, Calf, and Thigh sections)
• Handheld Controller
• Power Adapter
• Quick Guide Card
• User Manual (this document)
• Storage Bag

Image: All items included in the RENPHO Leg Massager package: wraps, controller, adapter, quick guide, user manual, and storage bag.

Setup Guide

Follow these steps to set up your RENPHO Leg Massager:

1. Put legs in the correct wraps: Identify the left (L) and right (R) leg wraps. Ensure the foot, calf, and thigh sections are correctly positioned on each leg.
2. Don't wrap too tightly: Secure the wraps around your legs. Ensure you can comfortably fit 4 fingers inside the wraps to allow for proper air compression.
3. Plug in controller: Connect the air hoses from the leg wraps to the corresponding ports on the handheld controller.
4. Connect the adapter: Plug the power adapter into the controller, then plug the adapter into a power outlet.

Image: Visual steps for setting up the leg massager, including correctly wearing the wraps, connecting the controller, and plugging in the power adapter.

Operating Instructions

Once set up, use the handheld controller to operate the massager:

• Power Button: Press to turn the device on or off.
• Modes: Choose from 6 massage modes (C1 Full Leg, C2 Feet & Calves, C3 Sequence, ST Thighs, SC Calves, SF Feet) to target different areas and massage patterns.
• Intensities: Select from 3 intensity levels (Low, Medium, High) to adjust the compression strength. It is recommended to start with the lowest intensity.
• Heat Settings: Activate heat therapy with 2 available heat levels (49°C / 120°F and 59°C / 138°F) for soothing warmth.
• Auto-Off Timer: The device features a smart timer that automatically shuts off after 20 minutes to prevent overheating and ensure safety.

Image: Detailed view of the handheld controller with buttons for power, modes, intensity, and heat, along with diagrams illustrating the different massage modes and heat levels.

Maintenance

To ensure the longevity and proper functioning of your RENPHO Leg Massager, follow these maintenance guidelines:

• Cleaning: Wipe the surface of the leg wraps and controller with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• Storage: When not in use, store the massager in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hoses are not kinked or twisted during storage.
• Inspection: Periodically check the power cord, air hoses, and wraps for any signs of damage. If any damage is found, discontinue use and contact customer support.

Troubleshooting

If you encounter any issues with your RENPHO Leg Massager, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact RENPHO customer support for further assistance.

Specifications

Warranty and Support

RENPHO products are designed for quality and reliability. For any warranty inquiries, technical support, or assistance with your device, please contact RENPHO customer service. Refer to the contact information provided in your Quick Guide Card or visit the official RENPHO website for support details.